Patch 8 of 8
Add SCSI host and device info not elsewhere available to /proc/scsi/cciss/*
Namely, connect cciss device instance with scsi host number, and
give scsi host number, bus, target, lun, devicetype, and 8-byte cciss LUNID
for each tapedrive/medium changer attached to a controller
For instance:
# cat /proc/scsi/cciss/2
cciss0: SCSI host: 2
c2b0t0l0 01 0x0000000000000001
Signed-off-by: Stephen M. Cameron <steve.cameron@xxxxxx>
Signed-off-by: Mike Miller <mike.miller@xxxxxx>
cciss_scsi.c | 25 +++++++++++++++++++++++--
1 files changed, 23 insertions(+), 2 deletions(-)
--------------------------------------------------------------------------------
diff -burNp lx2613-p007/drivers/block/cciss_scsi.c lx2613/drivers/block/cciss_scsi.c
--- lx2613-p007/drivers/block/cciss_scsi.c 2005-09-09 16:20:35.292948000 -0500
+++ lx2613/drivers/block/cciss_scsi.c 2005-09-09 16:24:43.948146824 -0500
@@ -1144,6 +1144,7 @@ cciss_scsi_proc_info(struct Scsi_Host *s
int buflen, datalen;
ctlr_info_t *ci;
+ int i;
int cntl_num;
@@ -1154,8 +1155,28 @@ cciss_scsi_proc_info(struct Scsi_Host *s
cntl_num = ci->ctlr; /* Get our index into the hba[] array */
if (func == 0) { /* User is reading from /proc/scsi/ciss*?/?* */
- buflen = sprintf(buffer, "hostnum=%d\n", sh->host_no);
+ buflen = sprintf(buffer, "cciss%d: SCSI host: %d\n",
+ cntl_num, sh->host_no);
+ /* this information is needed by apps to know which cciss
+ device corresponds to which scsi host number without
+ having to open a scsi target device node. The device
+ information is not a duplicate of /proc/scsi/scsi because
+ the two may be out of sync due to scsi hotplug, rather
+ this info is for an app to be able to use to know how to
+ get them back in sync. */
+
+ for (i=0;i<ccissscsi[cntl_num].ndevices;i++) {
+ struct cciss_scsi_dev_t *sd = &ccissscsi[cntl_num].dev[i];
+ buflen += sprintf(&buffer[buflen], "c%db%dt%dl%d %02d "
+ "0x%02x%02x%02x%02x%02x%02x%02x%02x\n",
+ sh->host_no, sd->bus, sd->target, sd->lun,
+ sd->devtype,
+ sd->scsi3addr[0], sd->scsi3addr[1],
+ sd->scsi3addr[2], sd->scsi3addr[3],
+ sd->scsi3addr[4], sd->scsi3addr[5],
+ sd->scsi3addr[6], sd->scsi3addr[7]);
+ }
datalen = buflen - offset;
if (datalen < 0) { /* they're reading past EOF. */
datalen = 0;
@@ -1417,7 +1438,7 @@ cciss_proc_tape_report(int ctlr, unsigne
CPQ_TAPE_LOCK(ctlr, flags);
size = sprintf(buffer + *len,
- " Sequential access devices: %d\n\n",
+ "Sequential access devices: %d\n\n",
ccissscsi[ctlr].ndevices);
CPQ_TAPE_UNLOCK(ctlr, flags);
*pos += size; *len += size;
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
