Using the User Space Expander configuration utility
===================================================
The file "expander_conf.c" is a user space program
which uses the "smp_portal" SMP portal to communicate
with expanders in the domain.
It gives you complete control of the expander you're
talking to, so please be careful if you're changing
route tables, phy settings, etc.
The "expander_conf.c" file is located here:
drivers/scsi/sas-class/expander_conf.c
How it works can be found in
drivers/scsi/sas-class/README, and of course in the
source code.
Here we show complete information about the three
expanders we saw in the previous email.
Dumping configuration info for Expander A
-----------------------------------------
A) As you can see phys 11, 10, 9 and 8 of this expander
are connected to phys 4, 5, 7, and 6 of the Host Adapter,
thus forming a wide port.
This is also the subtractive boundary of this
edge expander device set and of this expander.
B) As you can see phys 7 and 6 of this expander are
connected to phys 8 and 9 of expander B, thus forming
a wide port.
They use table routing attributes.
C) The routing table is also printed for phys 7 and 6.
It is of course identical.
D) End devices attached are clearly identifiable.
#expander_conf /sys/devices/pci0000\:01/0000\:01\:04.0/host11/sas/ha/ports/1/domain/50001c1716010600/smp_portal
Vendor: VITESSE
Product: VSC7160 Eval Brd
Revision: 4
Component: VITESSE
Component ID: 29024
Component revision: 4
Expander Change Count: 12
Expander Route Indexes: 160
Number of phys: 13
Configuring: No
Configurable route table: Yes
Enclosure Logical Identifier: 00000000000000000000
Phy00:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 3221225471
RD error count: 4294958971
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy01:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 3706272315
RD error count: 2079374150
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy02:D attached: 50001c1716010603:00 chg count:05
Attached device: SATA device Link rate: G1 (1,5 Gb/s)
Tproto: STP Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 4216795329
RD error count: 4277909111
DW sync loss count: 0
Reset problem count: 0
Phy03:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 828522753
RD error count: 27724688
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy04:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy05:D attached: 5000c50000513329:01 chg count:01
Attached device: end device Link rate: G2 (3 GB/s)
Tproto: SSP Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 4292849663
RD error count: 4261371839
DW sync loss count: 0
Reset problem count: 0
Phy06:T attached: 50001c1071609c00:09 chg count:01
Attached device: edge expander Link rate: G2 (3 GB/s)
Tproto: SMP Iproto: SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 3585802240
RD error count: 3870195680
DW sync loss count: 0
Reset problem count: 0
Routing Table
00 enabled 5000c50000102a65
01 enabled 50001c1071609c02
02 enabled 5005076a000001e0
03 enabled 5000c50000513385
04 enabled 5c50000000409c11
05 enabled 5005076a000001ed
Phy07:T attached: 50001c1071609c00:08 chg count:01
Attached device: edge expander Link rate: G2 (3 GB/s)
Tproto: SMP Iproto: SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 3229920258
RD error count: 1111358524
DW sync loss count: 0
Reset problem count: 0
Routing Table
00 enabled 5000c50000102a65
01 enabled 50001c1071609c02
02 enabled 5005076a000001e0
03 enabled 5000c50000513385
04 enabled 5c50000000409c11
05 enabled 5005076a000001ed
Phy08:S attached: 50000d1000281260:06 chg count:01
Attached device: end device Link rate: G2 (3 GB/s)
Tproto: Iproto: SSP|STP|SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 4154908636
RD error count: 2808853200
DW sync loss count: 0
Reset problem count: 0
Phy09:S attached: 50000d1000281260:07 chg count:01
Attached device: end device Link rate: G2 (3 GB/s)
Tproto: Iproto: SSP|STP|SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 371055385
RD error count: 3645431138
DW sync loss count: 0
Reset problem count: 0
Phy10:S attached: 50000d1000281260:05 chg count:01
Attached device: end device Link rate: G2 (3 GB/s)
Tproto: Iproto: SSP|STP|SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 3790805948
RD error count: 2017124313
DW sync loss count: 0
Reset problem count: 0
Phy11:S attached: 50000d1000281260:04 chg count:01
Attached device: end device Link rate: G2 (3 GB/s)
Tproto: Iproto: SSP|STP|SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Phy12:D attached: 50001c171601060d:00 chg count:00
Attached device: end device Link rate: G2 (3 GB/s)
Tproto: SSP Iproto: SSP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Virtual phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Dumping configuration info for Expander B
-----------------------------------------
A) As you can see phys 9 and 8 of this expander are
connected to phys 6 and 7 of Expander A as we already
noted above. This forms the subtractive boundary of this
expander.
B) As you can see phys 3 and 2 of this expander are
connected to phys 7 and 3 of Expander C, thus forming
a wide port.
They use the table routing attribute.
C) The routing table of phys 3 and 2 is also
printed. It is of course identical.
D) End devices attached are clearly identifiable.
expander_conf /sys/devices/pci0000\:01/0000\:01\:04.0/host11/sas/ha/ports/1/domain/50001c1716010600/50001c1071609c00/smp_portal
Vendor: VITESSE
Product: VSC7160 Eval Brd
Revision: 4
Component: VITESSE
Component ID: 29024
Component revision: 4
Expander Change Count: 6
Expander Route Indexes: 160
Number of phys: 12
Configuring: No
Configurable route table: Yes
Enclosure Logical Identifier: 00000000000000000000
Phy00:D attached: 5000c50000102a65:00 chg count:01
Attached device: end device Link rate: G2 (3 GB/s)
Tproto: SSP Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 2351827995
RD error count: 3908042718
DW sync loss count: 0
Reset problem count: 0
Phy01:D attached: 50001c1071609c02:00 chg count:01
Attached device: SATA device Link rate: G1 (1,5 Gb/s)
Tproto: STP Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Phy02:T attached: 5005076a000001e0:03 chg count:01
Attached device: edge expander Link rate: G2 (3 GB/s)
Tproto: SMP Iproto: SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 1939984985
RD error count: 2207511641
DW sync loss count: 0
Reset problem count: 0
Routing Table
00 enabled 5000c50000513385
01 enabled 5c50000000409c11
02 enabled 5005076a000001ed
Phy03:T attached: 5005076a000001e0:07 chg count:01
Attached device: edge expander Link rate: G2 (3 GB/s)
Tproto: SMP Iproto: SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 2343129041
RD error count: 3405770672
DW sync loss count: 0
Reset problem count: 0
Routing Table
00 enabled 5000c50000513385
01 enabled 5c50000000409c11
02 enabled 5005076a000001ed
Phy04:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy05:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy06:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 3216754055
RD error count: 4159684279
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy07:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 3687816959
RD error count: 4261377627
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy08:S attached: 50001c1716010600:07 chg count:01
Attached device: edge expander Link rate: G2 (3 GB/s)
Tproto: SMP Iproto: SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 790459193
RD error count: 3202994802
DW sync loss count: 0
Reset problem count: 0
Phy09:S attached: 50001c1716010600:06 chg count:01
Attached device: edge expander Link rate: G2 (3 GB/s)
Tproto: SMP Iproto: SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Phy10:S attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 3888053628
RD error count: 3011959286
DW sync loss count: 0
Reset problem count: 0
Phy11:S attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 222822400
RD error count: 246415626
DW sync loss count: 0
Reset problem count: 0
Dumping configuration info for Expander C
-----------------------------------------
A) As you can see phys 7 and 3 of this expander are
connected to phys 3 and 2 of Expander B, thus forming
a wide port. This forms the subtractive boundary
of this expander.
B) End devices attached are clearly identifiable.
expander_conf /sys/devices/pci0000\:01/0000\:01\:04.0/host11/sas/ha/ports/1/domain/50001c1716010600/50001c1071609c00/5005076a000001e0/smp_portal
Vendor: VITESSE
Product: VSC7160 Eval Brd
Revision: 4
Component: VITESSE
Component ID: 29024
Component revision: 3
Expander Change Count: 4
Expander Route Indexes: 160
Number of phys: 13
Configuring: No
Configurable route table: Yes
Enclosure Logical Identifier: 00000000000000000000
Phy00:D attached: 5000c50000513385:01 chg count:01
Attached device: end device Link rate: G2 (3 GB/s)
Tproto: SSP Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Phy01:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy02:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 2147352567
RD error count: 4294964735
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy03:S attached: 50001c1071609c00:02 chg count:01
Attached device: edge expander Link rate: G2 (3 GB/s)
Tproto: SMP Iproto: SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Phy04:S attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 1558851767
RD error count: 2009595383
DW sync loss count: 0
Reset problem count: 0
Phy05:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 4277141467
RD error count: 4223134719
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy06:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 2147483647
RD error count: 4026499071
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy07:S attached: 50001c1071609c00:03 chg count:01
Attached device: edge expander Link rate: G2 (3 GB/s)
Tproto: SMP Iproto: SMP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 3243694232
RD error count: 749555105
DW sync loss count: 0
Reset problem count: 0
Phy08:S attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Phy09:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 4091248127
RD error count: 2936004581
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy10:T attached: 0000000000000000:00 chg count:00
Attached device: none Link rate: unknown
Tproto: Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 3758030847
RD error count: 4294963183
DW sync loss count: 0
Reset problem count: 0
Routing Table
Empty (all zero)
Phy11:D attached: 5c50000000409c11:00 chg count:01
Attached device: end device Link rate: G2 (3 GB/s)
Tproto: SSP Iproto:
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Physical phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
Phy12:D attached: 5005076a000001ed:00 chg count:00
Attached device: end device Link rate: G2 (3 GB/s)
Tproto: SSP Iproto: SSP
Programmed MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Hardware MIN-MAX linkrate: G1 (1,5 Gb/s) - G2 (3 GB/s)
Virtual phy
Partial pathway timeout value: 7 microseconds
Connector type: No information
Connector element index: 0
Connector physical link: 0
Invalid DW count: 0
RD error count: 0
DW sync loss count: 0
Reset problem count: 0
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
