I am not able to boot the 2.6.13 version of the kernel. I've tried different systems, tried downloading again, still nothing. Here's the last thing I see from the serial port: md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 input: AT Translated Set 2 keyboard on isa0060/serio0 VFS: Mounted root (ext2 filesystem). logips2pp: Detected unknown logitech mouse model 1 input: PS/2 Logitech Mouse on isa0060/serio1 SCSI subsystem initialized Fusion MPT base driver 3.03.02 Copyright (c) 1999-2005 LSI Logic Corporation The console shows the reiserfs module loaded and then the message waiting for /dev/sda2 to appear It then dumps a list of devices and sda is not one of them. I've attached the entire boot log if any one is interested. I've tried statically linking cciss on another system and the same basic results. Apparently, MPT cannot be statically linked unless I missed something. What do I have to do to get 2.6.13 to boot up? Thanks, mikem
crap 0000:00:00.0 Host bridge: Intel Corp. Server Memory Controller Hub (rev 09) 0000:00:02.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port A0 (rev 09) 0000:00:04.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B0 (rev 09) 0000:00:05.0 PCI bridge: Intel Corp. Memory Controller Hub PCI Express Port B1 (rev 09) 0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02) 0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02) 0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02) 0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02) 0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02) 0000:00:1e.0 PCI bridge: Intel Corp. 82801BA/CA/DB/EB/ER Hub interface to PCI Bridge (rev c2) 0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02) 0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02) 0000:01:03.0 VGA compatible controller: ATI Technologies Inc Rage XL (rev 27) 0000:01:04.0 System peripheral: Compaq Computer Corporation Integrated Lights Out Controller (rev 01) 0000:01:04.2 System peripheral: Compaq Computer Corporation Integrated Lights Out Processor (rev 01) 0000:02:00.0 PCI bridge: Intel Corp. PCI Bridge Hub A (rev 09) 0000:02:00.2 PCI bridge: Intel Corp. PCI Bridge Hub B (rev 09) 0000:03:02.0 RAID bus controller: Hewlett-Packard Company: Unknown device 3220 0000:03:03.0 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) 0000:03:03.1 SCSI storage controller: LSI Logic / Symbios Logic 53c1030 PCI-X Fusion-MPT Dual Ultra320 SCSI (rev 07) 0000:07:01.0 PCI bridge: IBM PCI-X to PCI-X Bridge (rev 02) 0000:07:03.0 Ethernet controller: Broadcom Corporation NetXtreme BCM5703 Gigabit Ethernet (rev 10) 0000:08:04.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 01) 0000:08:05.0 RAID bus controller: Compaq Computer Corporation Smart Array 64xx (rev 01) 0000:0b:00.0 RAID bus controller: Hewlett-Packard Company: Unknown device 3230 (rev 01) Module Size Used by joydev 12416 0 sg 43960 0 st 42660 0 sr_mod 20004 0 floppy 66000 0 ipv6 280192 17 ehci_hcd 35848 0 hw_random 7072 0 cciss 48392 0 uhci_hcd 34336 0 evdev 11776 0 usbcore 130192 3 ehci_hcd,uhci_hcd tg3 88708 0 dm_mod 63808 0 reiserfs 253680 1 mptscsih 38836 0 mptbase 46944 1 mptscsih sd_mod 20352 3 scsi_mod 148176 6 sg,st,sr_mod,cciss,mptscsih,sd_mod md: stopping all md devices. md: md0 switched to read-only mode. Restarting system. machine restart machine restart àààààààààààüü€üüŽüàðüüžàžfæxüÏ ProLiant System BIOS - P50 (12/02/2004) Copyright 1982, 2004 Hewlett-Packard Development Group, L.P. 5120 MB Detected Processor 1 initialized at 3.40 GHz/800 MHz(1 Mbyte L2) Advanced Memory Protection Mode: Advanced ECC Support Redundant ROM Detected - This system contains a valid backup system ROM. 5120 MB Initialized / 5120 MB Detected ProLiant System BIOS - P50 (12/02/2004) Copyright 1982, 2004 Hewlett-Packard Development Group, L.P. Processor 1 initialized at 3.40 GHz/800 MHz(1 Mbyte L2) Advanced Memory Protection Mode: Advanced ECC Support Redundant ROM Detected - This system contains a valid backup system ROM. LSI Logic Corp. MPT BIOS Copyright 1995-2004 LSI Logic Corp. MPTBIOS-5.05.18 HP Build <<<Press F8 for configuration options>>> Searching for device at HBA 0, ID 0, LUN 0 Searching for device at HBA 0, ID 0, LUN 1 Searching for device at HBA 0, ID 0, LUN 2 Searching for device at HBA 0, ID 0, LUN 3 Searching for device at HBA 0, ID 0, LUN 4 Searching for device at HBA 0, ID 0, LUN 5 Searching for device at HBA 0, ID 0, LUN 6 Searching for device at HBA 0, ID 0, LUN 7 Searching for device at HBA 0, ID 1, LUN 0 Searching for device at HBA 0, ID 2, LUN 0 Searching for device at HBA 0, ID 3, LUN 0 Searching for device at HBA 0, ID 4, LUN 0 Searching for device at HBA 0, ID 5, LUN 0 Searching for device at HBA 0, ID 6, LUN 0 Searching for device at HBA 0, ID 8, LUN 0 Searching for device at HBA 0, ID 9, LUN 0 Searching for device at HBA 0, ID 10, LUN 0 Searching for device at HBA 0, ID 11, LUN 0 Searching for device at HBA 0, ID 12, LUN 0 Searching for device at HBA 0, ID 13, LUN 0 Searching for device at HBA 0, ID 14, LUN 0 Searching for device at HBA 0, ID 15, LUN 0 HBA ID LUN VENDOR PRODUCT REV SYNC WIDE CAPACITY --- -- --- -------- ---------------- -------- ----- ---- ------------ 0 0 0 COMPAQ BD0186349B 3B12 80.0 16 18 GB * 0 7 0 LSILogic LSI1030-IT 1032700 320.0 16 List of non INT13 devices from additional channels: Slot Port ID LUN VENDOR PRODUCT REV SYNC WIDE CAPACITY ---- ---- -- --- -------- ---------------- -------- ----- ---- ------------ 0 01 7 0 LSILogic LSI1030-IT 1032700 320.0 16 This device has been validated to run at 80MB/s and should support, (*) 160MB/s, when the operating system is loaded. LSI Logic Corp. MPT boot ROM successfully installed! Integrated Lights-Out press [F8] to configure 1.70 Feb 11 2005 Slot 2 HP Smart Array P600 Controller Initializing... \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ (256MB, v1.20) 1 Logical Drive Press <F8> to run the Option ROM Configuration for Arrays Utility Press <ESC> to skip configuration and continue Slot 3 HP Smart Array 6400 Controller Initializing... \|/-\|/-\|/-\|/-\| (192MB, v2.46) 1 Logical Drive Press <F8> to run the Option ROM Configuration for Arrays Utility Press <ESC> to skip configuration and continue Slot 3 HP Smart Array 6400 EM Controller Initializing... -\|/-\|/-\|/-\|/-\| (192MB, v2.46) 0 Logical Drives 1785-Slot 3 Drive Array Not Configured No Drives Detected Slot 5 HP Smart Array P400 Controller Initializing... \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ (256MB, v0.13) 0 Logical Drives 1785-Slot 5 Drive Array Not Configured No Drives Detected HP Ethernet Boot Agent v7.0.3 Copyright (C) 2000,2003 Hewlett-Packard Development Company, L.P. All rights reserved. Press Ctrl-S to Enter Configuration Menu ... Press "F9" key for ROM-Based Setup Utility Press "F10" key for System Maintenance Menu Press "F12" key for PXE boot For access via BIOS Serial Console Press "ESC+9" for ROM-Based Setup Utility Press "ESC+0" for System Maintenance Menu Press "ESC+@" for PXE boot Attempting Boot FromCD-ROMAttempting Boot FromFloppy Drive (A:)Attempting Boot FromHard Drive (C:)GRUB Loading stage2.. Initializing gfx code... Memory: 0x34950 - 0x63f80, img data at 0x40e90 kernel (hd0,1)/boot/vmlinuz-2613-pass2 root=/dev/sda2 vga=0x31a selinux=0 cons ole=ttyS0,115200 console=tty0 resume=/dev/sda3 elevator=cfq [Linux-bzImage, setup=0x1c00, size=0x1ab701] initrd (hd0,1)/boot/initrd-2613-pass2 [Linux-initrd @ 0x37e8b000, 0x164fbf bytes] Bootdata ok (command line is root=/dev/sda2 vga=0x31a selinux=0 console=ttyS0,115200 console=tty0 resume=/dev/sda3 elevator=cfq) Linux version 2.6.13 (root@aries) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Thu Sep 8 15:51:41 CDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable) BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data) BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000015bfff000 (usable) No NUMA configuration found Faking a node at 0000000000000000-000000015bfff000 Bootmem setup node 0 0000000000000000-000000015bfff000 ACPI: PM-Timer IO Port: 0x908 ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) Processor #0 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] disabled) ACPI: LAPIC (acpi_id[0x04] lapic_id[0x04] disabled) ACPI: LAPIC (acpi_id[0x06] lapic_id[0x06] disabled) ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) Processor #1 15:3 APIC version 16 ACPI: LAPIC (acpi_id[0x03] lapic_id[0x03] disabled) ACPI: LAPIC (acpi_id[0x05] lapic_id[0x05] disabled) ACPI: LAPIC (acpi_id[0x07] lapic_id[0x07] disabled) ACPI: LAPIC_NMI (acpi_id[0xff] dfl dfl lint[0x1]) ACPI: IOAPIC (id[0x08] address[0xfec00000] gsi_base[0]) IOAPIC[0]: apic_id 8, version 32, address 0xfec00000, GSI 0-23 ACPI: IOAPIC (id[0x09] address[0xfec80000] gsi_base[24]) IOAPIC[1]: apic_id 9, version 32, address 0xfec80000, GSI 24-47 ACPI: IOAPIC (id[0x0a] address[0xfec80100] gsi_base[48]) IOAPIC[2]: apic_id 10, version 32, address 0xfec80100, GSI 48-71 ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 high edge) ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) Setting APIC routing to flat Using ACPI (MADT) for SMP configuration information Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) Checking aperture... Built 1 zonelists Kernel command line: root=/dev/sda2 vga=0x31a selinux=0 console=ttyS0,115200 console=tty0 resume=/dev/sda3 elevator=cfq Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 3.579545 MHz PM timer. time.c: Detected 3400.271 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Placing software IO TLB between 0x689d000 - 0x889d000 Memory: 5047236k/5701628k available (2402k kernel code, 0k reserved, 1210k data, 220k init) Calibrating delay using timer specific routine.. 6810.87 BogoMIPS (lpj=13621745) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU0: Thermal monitoring enabled (TM1) mtrr: v2.0 (20020519) Using local APIC timer interrupts. Detected 12.500 MHz APIC timer. Booting processor 1/2 APIC 0x1 Initializing CPU#1 Calibrating delay using timer specific routine.. 6800.69 BogoMIPS (lpj=13601395) CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K CPU: Physical Processor ID: 0 CPU1: Thermal monitoring enabled (TM1) Intel(R) Xeon(TM) CPU 3.40GHz stepping 04 CPU 1: Syncing TSC to CPU 0. CPU 1: synchronized TSC with CPU 0 (last diff -132 cycles, maxerr 935 cycles) Brought up 2 CPUs time.c: Using PIT/TSC based timekeeping. testing NMI watchdog ... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd NET: Registered protocol family 16 ACPI: bus type pci registered PCI: Using configuration type 1 PCI: Using MMCONFIG at e0000000 ACPI: Subsystem revision 20050408 ACPI: Interpreter enabled ACPI: Using IOAPIC for interrupt routing ACPI: PCI Root Bridge [PCI0] (0000:00) PCI: Probing PCI hardware (bus 00) ACPI: Assume root bridge [\_SB_.PCI0] segment is 0 ACPI: Assume root bridge [\_SB_.PCI0] bus is 0 PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device PCI: Transparent bridge - 0000:00:1e.0 ACPI: PCI Interrupt Link [LNKA] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKB] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKD] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKE] (IRQs 5 7 10 11) *0, disabled. ACPI: PCI Interrupt Link [LNKF] (IRQs 5 7 *10 11) ACPI: PCI Interrupt Link [LNKG] (IRQs 5 7 10 *11) ACPI: PCI Interrupt Link [LNKH] (IRQs 5 7 10 *11) PCI: Using ACPI for IRQ routing PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report PCI: Cannot allocate resource region 4 of device 0000:00:1d.0 PCI: Cannot allocate resource region 4 of device 0000:00:1d.1 PCI: Cannot allocate resource region 4 of device 0000:00:1d.2 PCI: Cannot allocate resource region 4 of device 0000:00:1d.3 PCI: Bridge: 0000:02:00.0 IO window: 4000-4fff MEM window: fdb00000-fdbfffff PREFETCH window: e0000000-e02fffff PCI: Bridge: 0000:07:01.0 IO window: 5000-5fff MEM window: fdd00000-fddfffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.2 IO window: 5000-5fff MEM window: fdc00000-fddfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: 4000-5fff MEM window: fdb00000-fddfffff PREFETCH window: e0000000-e02fffff PCI: Bridge: 0000:00:04.0 IO window: 6000-6fff MEM window: fde00000-fdffffff PREFETCH window: e0300000-e03fffff PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 àààààààààààüü€üüŽüàðüüžàžfæxüÏ ProLiant System BIOS - P50 (12/02/2004) Copyright 1982, 2004 Hewlett-Packard Development Group, L.P. 5120 MB Detected Processor 1 initialized at 3.40 GHz/800 MHz(1 Mbyte L2) Advanced Memory Protection Mode: Advanced ECC Support Redundant ROM Detected - This system contains a valid backup system ROM. 5120 MB Initialized / 5120 MB Detected ProLiant System BIOS - P50 (12/02/2004) Copyright 1982, 2004 Hewlett-Packard Development Group, L.P. Processor 1 initialized at 3.40 GHz/800 MHz(1 Mbyte L2) Advanced Memory Protection Mode: Advanced ECC Support Redundant ROM Detected - This system contains a valid backup system ROM. LSI Logic Corp. MPT BIOS Copyright 1995-2004 LSI Logic Corp. MPTBIOS-5.05.18 HP Build <<<Press F8 for configuration options>>> Searching for device at HBA 0, ID 0, LUN 0 Spinning up the device! Searching for device at HBA 0, ID 0, LUN 1 Searching for device at HBA 0, ID 0, LUN 2 Searching for device at HBA 0, ID 0, LUN 3 Searching for device at HBA 0, ID 0, LUN 4 Searching for device at HBA 0, ID 0, LUN 5 Searching for device at HBA 0, ID 0, LUN 6 Searching for device at HBA 0, ID 0, LUN 7 Searching for device at HBA 0, ID 1, LUN 0 Searching for device at HBA 0, ID 2, LUN 0 Searching for device at HBA 0, ID 3, LUN 0 Searching for device at HBA 0, ID 4, LUN 0 Searching for device at HBA 0, ID 5, LUN 0 Searching for device at HBA 0, ID 6, LUN 0 Searching for device at HBA 0, ID 8, LUN 0 Searching for device at HBA 0, ID 9, LUN 0 Searching for device at HBA 0, ID 10, LUN 0 Searching for device at HBA 0, ID 11, LUN 0 Searching for device at HBA 0, ID 12, LUN 0 Searching for device at HBA 0, ID 13, LUN 0 Searching for device at HBA 0, ID 14, LUN 0 Searching for device at HBA 0, ID 15, LUN 0 Searching for device at HBA 0, ID 0, LUN 0 HBA ID LUN VENDOR PRODUCT REV SYNC WIDE CAPACITY --- -- --- -------- ---------------- -------- ----- ---- ------------ 0 0 0 COMPAQ BD0186349B 3B12 80.0 16 18 GB * 0 7 0 LSILogic LSI1030-IT 1032700 320.0 16 List of non INT13 devices from additional channels: Slot Port ID LUN VENDOR PRODUCT REV SYNC WIDE CAPACITY ---- ---- -- --- -------- ---------------- -------- ----- ---- ------------ 0 01 7 0 LSILogic LSI1030-IT 1032700 320.0 16 This device has been validated to run at 80MB/s and should support, (*) 160MB/s, when the operating system is loaded. LSI Logic Corp. MPT boot ROM successfully installed! Integrated Lights-Out press [F8] to configure 1.70 Feb 11 2005 Slot 2 HP Smart Array P600 Controller Initializing... \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ (256MB, v1.20) 1 Logical Drive Press <F8> to run the Option ROM Configuration for Arrays Utility Press <ESC> to skip configuration and continue Slot 3 HP Smart Array 6400 Controller Initializing... \|/-\|/-\|/-\|/-\| (192MB, v2.46) 1 Logical Drive Press <F8> to run the Option ROM Configuration for Arrays Utility Press <ESC> to skip configuration and continue Slot 3 HP Smart Array 6400 EM Controller Initializing... -\|/-\|/-\|/-\|/-\| (192MB, v2.46) 0 Logical Drives 1785-Slot 3 Drive Array Not Configured No Drives Detected Slot 5 HP Smart Array P400 Controller Initializing... \|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/-\|/ (256MB, v0.13) 0 Logical Drives 1785-Slot 5 Drive Array Not Configured No Drives Detected HP Ethernet Boot Agent v7.0.3 Copyright (C) 2000,2003 Hewlett-Packard Development Company, L.P. All rights reserved. Press Ctrl-S to Enter Configuration Menu ... Press "F9" key for ROM-Based Setup Utility Press "F10" key for System Maintenance Menu Press "F12" key for PXE boot For access via BIOS Serial Console Press "ESC+9" for ROM-Based Setup Utility Press "ESC+0" for System Maintenance Menu Press "ESC+@" for PXE boot Attempting Boot FromCD-ROMAttempting Boot FromFloppy Drive (A:)Attempting Boot FromHard Drive (C:)GRUB Loading stage2.. Initializing gfx code... Memory: 0x34950 - 0x63f80, img data at 0x40e90 kernel (hd0,1)/boot/vmlinuz-2613 root=/dev/sda2 vga=0x31a selinux=0 console=tt yS0,115200 console=tty0 resume=/dev/sda3 elevator=cfq [Linux-bzImage, setup=0x1c00, size=0x18c960] initrd (hd0,1)/boot/initrd-2613 [Linux-initrd @ 0x37d26000, 0x2c9f20 bytes] Bootdata ok (command line is root=/dev/sda2 vga=0x31a selinux=0 console=ttyS0,115200 console=tty0 resume=/dev/sda3 elevator=cfq) Linux version 2.6.13 (root@aries) (gcc version 3.3.3 (SuSE Linux)) #1 SMP Thu Sep 8 14:22:46 CDT 2005 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009dc00 (usable) BIOS-e820: 000000000009dc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 00000000dfff3000 (usable) BIOS-e820: 00000000dfff3000 - 00000000dfffb000 (ACPI data) BIOS-e820: 00000000dfffb000 - 00000000e0000000 (reserved) BIOS-e820: 00000000fec00000 - 00000000fed00000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee10000 (reserved) BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved) BIOS-e820: 0000000100000000 - 000000015bfff000 (usable) No NUMA configuration found Faking a node at 0000000000000000-000000015bfff000 Bootmem setup node 0 0000000000000000-000000015bfff000 Intel MultiProcessor Specification v1.4 Virtual Wire compatibility mode. OEM ID: HP <6>Product ID: PROLIANT <6>APIC at: 0xFEE00000 Processor #0 15:3 APIC version 20 I/O APIC #8 Version 17 at 0xFEC00000. I/O APIC #9 Version 17 at 0xFEC80000. I/O APIC #10 Version 17 at 0xFEC80100. Setting APIC routing to flat Processors: 1 Allocating PCI resources starting at e0000000 (gap: e0000000:1ec00000) Checking aperture... Built 1 zonelists Kernel command line: root=/dev/sda2 vga=0x31a selinux=0 console=ttyS0,115200 console=tty0 resume=/dev/sda3 elevator=cfq Initializing CPU#0 PID hash table entries: 4096 (order: 12, 131072 bytes) time.c: Using 1.193182 MHz PIT timer. time.c: Detected 3400.320 MHz processor. Console: colour dummy device 80x25 Dentry cache hash table entries: 1048576 (order: 11, 8388608 bytes) Inode-cache hash table entries: 524288 (order: 10, 4194304 bytes) Placing software IO TLB between 0x689d000 - 0x889d000 Memory: 5046156k/5701628k available (2098k kernel code, 0k reserved, 1214k data, 200k init) Calibrating delay using timer specific routine.. 6811.38 BogoMIPS (lpj=13622771) Security Framework v1.0.0 initialized SELinux: Disabled at boot. Mount-cache hash table entries: 256 CPU: Trace cache: 12K uops, L1 D cache: 16K CPU: L2 cache: 1024K using mwait in idle threads. CPU: Physical Processor ID: 0 CPU0: Thermal monitoring enabled (TM1) mtrr: v2.0 (20020519) Using IO-APIC 8 Using IO-APIC 9 Using IO-APIC 10 Using local APICCtimer interrupts. Detected 12.501 MHz APIC timer. Brought up 1 CPUs time.c: Using PIT/TSC based timekeeping. testing NMI watchdog ... OK. checking if image is initramfs...it isn't (no cpio magic); looks like an initrd NET: Registered protocol family 16 PCI: Using configuration type 1 PCI: Probing PCI hardware PCI: Probing PCI hardware (bus 00) PCI: Ignoring BAR0-3 of IDE controller 0000:00:1f.1 PCI: PXH quirk detected, disabling MSI for SHPC device PCI: PXH quirk detected, disabling MSI for SHPC device PCI: Transparent bridge - 0000:00:1e.0 PCI->APIC IRQ transform: 0000:00:02.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:00:04.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:00:05.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:00:1d.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:00:1d.1[B] -> IRQ 193 PCI->APIC IRQ transform: 0000:00:1d.2[C] -> IRQ 185 PCI->APIC IRQ transform: 0000:00:1d.3[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:00:1d.7[D] -> IRQ 217 PCI->APIC IRQ transform: 0000:03:02.0[A] -> IRQ 58 PCI->APIC IRQ transform: 0000:03:03.0[A] -> IRQ 74 PCI->APIC IRQ transform: 0000:03:03.1[B] -> IRQ 50 PCI->APIC IRQ transform: 0000:07:03.0[A] -> IRQ 90 PCI: using PPB 0000:07:01.0[A] to get irq 50 PCI->APIC IRQ transform: 0000:08:04.0[A] -> IRQ 98 PCI: using PPB 0000:07:01.0[B] to get irq 57 PCI->APIC IRQ transform: 0000:08:05.0[B] -> IRQ 122 PCI->APIC IRQ transform: 0000:0b:00.0[A] -> IRQ 169 PCI->APIC IRQ transform: 0000:01:04.0[A] -> IRQ 201 PCI->APIC IRQ transform: 0000:01:04.2[B] -> IRQ 209 PCI: Cannot allocate resource region 4 of device 0000:00:1d.0 PCI: Cannot allocate resource region 4 of device 0000:00:1d.1 PCI: Cannot allocate resource region 4 of device 0000:00:1d.2 PCI: Cannot allocate resource region 4 of device 0000:00:1d.3 PCI: Bridge: 0000:02:00.0 IO window: 4000-4fff MEM window: fdb00000-fdbfffff PREFETCH window: e0000000-e02fffff PCI: Bridge: 0000:07:01.0 IO window: 5000-5fff MEM window: fdd00000-fddfffff PREFETCH window: disabled. PCI: Bridge: 0000:02:00.2 IO window: 5000-5fff MEM window: fdc00000-fddfffff PREFETCH window: disabled. PCI: Bridge: 0000:00:02.0 IO window: 4000-5fff MEM window: fdb00000-fddfffff PREFETCH window: e0000000-e02fffff PCI: Bridge: 0000:00:04.0 IO window: 6000-6fff MEM window: fde00000-fdffffff PREFETCH window: e0300000-e03fffff PCI: Bridge: 0000:00:05.0 IO window: disabled. MEM window: disabled. PREFETCH window: disabled. PCI: Bridge: 0000:00:1e.0 IO window: 1000-3fff MEM window: fbf00000-fcffffff PREFETCH window: e0400000-e04fffff PCI-DMA: Using software bounce buffering for IO (SWIOTLB) IA32 emulation $Id: sys_ia32.c,v 1.32 2002/03/24 13:02:28 ak Exp $ audit: initializing netlink socket (disabled) audit(1126195265.908:1): initialized Total HugeTLB memory allocated, 0 VFS: Disk quotas dquot_6.5.1 Dquot-cache hash table entries: 512 (order 0, 4096 bytes) Initializing Cryptographic API Intel E7520/7320/7525 detected.<6>Disabling irq balancing and affinity IRQ lockup detection disabled vesafb: framebuffer at 0xfc000000, mapped to 0xffffc20000080000, using 5120k, total 8128k vesafb: mode is 1280x1024x16, linelength=2560, pages=2 vesafb: scrolling: redraw vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 mtrr: type mismatch for fc000000,400000 old: uncachable new: write-combining mtrr: type mismatch for fc000000,200000 old: uncachable new: write-combining mtrr: type mismatch for fc000000,100000 old: uncachable new: write-combining mtrr: type mismatch for fc000000,80000 old: uncachable new: write-combining mtrr: type mismatch for fc000000,40000 old: uncachable new: write-combining mtrr: type mismatch for fc000000,20000 old: uncachable new: write-combining mtrr: type mismatch for fc000000,10000 old: uncachable new: write-combining mtrr: type mismatch for fc000000,8000 old: uncachable new: write-combining mtrr: type mismatch for fc000000,4000 old: uncachable new: write-combining mtrr: type mismatch for fc000000,2000 old: uncachable new: write-combining mtrr: type mismatch for fc000000,1000 old: uncachable new: write-combining Console: switching to colour frame buffer device 160x64 fb0: VESA VGA frame buffer device Real Time Clock Driver v1.12 Non-volatile memory driver v1.2 Linux agpgart interface v0.101 (c) Dave Jones serio: i8042 AUX port at 0x60,0x64 irq 12 serio: i8042 KBD port at 0x60,0x64 irq 1 Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing disabled ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A io scheduler noop registered io scheduler anticipatory registered io scheduler deadline registered io scheduler cfq registered (default) RAMDISK driver initialized: 16 RAM disks of 128000K size 1024 blocksize loop: loaded (max 8 devices) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH5: IDE controller at PCI slot 0000:00:1f.1 PCI: Enabling device 0000:00:1f.1 (0005 -> 0007) ICH5: chipset revision 2 ICH5: not 100% native mode: will probe irqs later ide0: BM-DMA at 0x0500-0x0507, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0x0508-0x050f, BIOS settings: hdc:pio, hdd:pio hda: HL-DT-ST CD-ROM GCR-8482B, ATAPI CD/DVD-ROM drive ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hda: ATAPI 48X CD-ROM drive, 128kB Cache Uniform CD-ROM driver Revision: 3.20 ide-floppy driver 0.99.newide mice: PS/2 mouse device common for all mice input: PC Speaker md: md driver 0.90.2 MAX_MD_DEVS=256, MD_SB_DISKS=27 md: bitmap version 3.38 NET: Registered protocol family 2 IP route cache hash table entries: 262144 (order: 9, 2097152 bytes) TCP established hash table entries: 262144 (order: 10, 4194304 bytes) TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) TCP: Hash tables configured (established 262144 bind 65536) TCP reno registered TCP bic registered NET: Registered protocol family 1 md: Autodetecting RAID arrays. md: autorun ... md: ... autorun DONE. RAMDISK: Compressed image found at block 0 input: AT Translated Set 2 keyboard on isa0060/serio0 VFS: Mounted root (ext2 filesystem). logips2pp: Detected unknown logitech mouse model 1 input: PS/2 Logitech Mouse on isa0060/serio1 SCSI subsystem initialized Fusion MPT base driver 3.03.02 Copyright (c) 1999-2005 LSI Logic Corporation