Reuben Farrelly wrote:
Hi Peter,
On 3/09/2005 4:59 a.m., Peter Williams wrote:
Brown, Len wrote:
[ 279.662960] [<c02d5c74>] wait_for_completion+0xa4/0x110
possibly a missing interrupt?
CONFIG_ACPI=y
any difference if booted with "acpi=off" or "acpi=noirq"?
Yes. In both cases, the system appears to boot normally but I'm
unable to login or connect via ssh. Also there's a "device not ready"
message
Are you seeing this "Device not ready" message appear over and over, or
just the once?
Just the once.
I am seeing it fill up my messages log as it is logging 1 or so messages
each minute. I've emailed the SCSI maintainer James Bottomley twice
about it but had no response either time.
The SCSI device I have is:
Sep 3 22:14:40 tornado kernel: Vendor: SONY Model: CD-RW CRX145S
Rev: 1.0b
As for the inability to log in, this bug may be relevant, given I also
had that problem:
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=166422
There are fixes in the pipeline for util-linux audit interaction in
Fedora as well. I know because I reported those too ;)
after the scsi initialization which I don't normally see. I've
attached the scsi initialization output. The PF_NETLINK error
messages after the login prompt in this output are created whenever I
try to log in or connect via ssh.
The workaround by enabling audit support, but obviously a better fix is
in the pipeline..
I'm surprised more people aren't discovering these 'interactions' due to
having audit not turned on. Does everyone build audit into their kernels?
reuben
--
Peter Williams pwil3058@xxxxxxxxxxxxxx
"Learning, n. The kind of ignorance distinguishing the studious."
-- Ambrose Bierce
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
