>Brown, Len wrote: >>>>[ 279.662960] [<c02d5c74>] wait_for_completion+0xa4/0x110 >> >> >> possibly a missing interrupt? >> >> >>>CONFIG_ACPI=y >> >> >> any difference if booted with "acpi=off" or "acpi=noirq"? > >Yes. In both cases, the system appears to boot normally but >I'm unable >to login or connect via ssh. Also there's a "device not >ready" message >after the scsi initialization which I don't normally see. >I've attached >the scsi initialization output. The PF_NETLINK error messages >after the >login prompt in this output are created whenever I try to log in or >connect via ssh. Please confirm that vanilla 2.6.13 has none of these symptoms. Please apply just the ACPI part of the 2.6.13-mm1 patch to see if these issues are caused by that or if they are caused by something else in the mm patch. http://ftp.kernel.org/pub/linux/kernel/people/akpm/patches/2.6/2.6.13/2.6.13-mm1/broken-out/git-acpi.patch thanks, -Len - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
