Peter Williams <pwil3058@xxxxxxxxxxxxxx> wrote: > > Andrew Morton wrote: > > Peter Williams <pwil3058@xxxxxxxxxxxxxx> wrote: > > > >>... at the the point indicated by the following output: > >> > >>[ 8.197224] Freeing unused kernel memory: 288k freed > >>[ 8.428217] SCSI subsystem initialized > >>[ 8.510376] sym0: <810a> rev 0x23 at pci 0000:00:08.0 irq 11 > >>[ 8.587731] sym0: No NVRAM, ID 7, Fast-10, SE, parity checking > >>[ 8.671531] sym0: SCSI BUS has been reset. > >>[ 8.725530] scsi0 : sym-2.2.1 > >>[ 17.256480] 0:0:0:0: ABORT operation started. > >>[ 22.323534] 0:0:0:0: ABORT operation timed-out. > >>[ 22.384348] 0:0:0:0: DEVICE RESET operation started. > >>[ 27.458702] 0:0:0:0: DEVICE RESET operation timed-out. > >>[ 27.527544] 0:0:0:0: BUS RESET operation started. > >>[ 32.533775] 0:0:0:0: BUS RESET operation timed-out. > >>[ 32.599173] 0:0:0:0: HOST RESET operation started. > >>[ 32.669659] sym0: SCSI BUS has been reset. > >> > > > > > > Is there no response from sysrq-T? > > Now that I've tried it there is a response. I've attached the complete > output from the boot including the sysrq-T output in the hang.output > attachment to this e-mail. Thanks. > ... > [ 278.990398] Call Trace: > [ 279.024761] [<c02279ff>] serio_thread+0xbf/0xf0 > [ 279.085573] [<c013b2a6>] kthread+0xa6/0xb0 > [ 279.140552] [<c01034d9>] kernel_thread_helper+0x5/0xc > [ 279.208130] insmod D C171DCC0 0 227 1 232 70 )[ 279.309031] d7f33b04 d7f33ab8 d8836bb0 c171dcc0 00001055 0fbf64f3 00000000 d > [ 279.408678] 0000e83b d7f33acc c01da354 d750e6ac d750e570 c130d160 0a9 > [ 279.518639] d7f32000 0a72aa15 00000002 00000246 c172de50 c172de50 d7f > [ 279.628599] Call Trace: > [ 279.662960] [<c02d5c74>] wait_for_completion+0xa4/0x110 > [ 279.732934] [<c0245c16>] blk_execute_rq+0x66/0xb0 > [ 279.796035] [<d8836eb6>] scsi_execute+0xb6/0xd0 [scsi_mod] > [ 279.869446] [<d8836f4d>] scsi_execute_req+0x7d/0xb0 [scsi_mod] > [ 279.947438] [<d88393f6>] scsi_probe_lun+0xb6/0x1d0 [scsi_mod] > [ 280.024285] [<d883995e>] scsi_probe_and_add_lun+0xde/0x1e0 [scsi_mod] > [ 280.110295] [<d883a119>] scsi_scan_target+0xc9/0x140 [scsi_mod] > [ 280.189431] [<d883a208>] scsi_scan_channel+0x78/0x90 [scsi_mod] > [ 280.268569] [<d883a2e9>] scsi_scan_host_selected+0xc9/0x120 [scsi_mod] > [ 280.355722] [<d883a362>] scsi_scan_host+0x22/0x30 [scsi_mod] > [ 280.431425] [<d8864e45>] sym2_probe+0xf5/0x120 [sym53c8xx] > [ 280.504835] [<c01e6ced>] pci_call_probe+0xd/0x10 > [ 280.566791] [<c01e6d39>] __pci_device_probe+0x49/0x60 > [ 280.634369] [<c01e6d79>] pci_device_probe+0x29/0x50 > [ 280.699657] [<c023e0ee>] driver_probe_device+0x3e/0xc0 > [ 280.768486] [<c023e25f>] __driver_attach+0x5f/0x70 > [ 280.832628] [<c023d7d3>] bus_for_each_dev+0x43/0x70 > [ 280.897916] [<c023e289>] driver_attach+0x19/0x20 > [ 280.959770] [<c023dc5b>] bus_add_driver+0x7b/0xd0 > [ 281.022767] [<c023e692>] driver_register+0x42/0x50 > [ 281.086910] [<c01e6fd0>] pci_register_driver+0x70/0x90 > [ 281.155635] [<d880202b>] sym2_init+0x2b/0x45 [sym53c8xx] > [ 281.226752] [<c014340c>] sys_init_module+0xec/0x230 > [ 281.292042] [<c0105199>] syscall_call+0x7/0xb > [ 281.350458] scsi_eh_0 D 00000000 0 232 1 227 )[ 281.451357] d7a51ea0 d7a51e64 1e62bb57 00000000 d7a50000 1e62c494 00000000 d > [ 281.551005] 00000106 d79b0ab0 c130d160 d79b0bec d79b0ab0 c130d160 9de > [ 281.660963] d7a50000 9de05c44 00000007 d7a50000 d7a51ef4 d7a51ef0 d7a > [ 281.770923] Call Trace: > [ 281.805288] [<c02d5c74>] wait_for_completion+0xa4/0x110 > [ 281.875159] [<d8863490>] sym_eh_handler+0x240/0x290 [sym53c8xx] > [ 281.954293] [<d88635fd>] sym53c8xx_eh_host_reset_handler+0x2d/0x50 [sym53c8][ 282.050611] [<d8835e9b>] scsi_try_host_reset+0x2b/0xa0 [scsi_mod] > [ 282.132041] [<d883602c>] scsi_eh_host_reset+0x1c/0xa0 [scsi_mod] > [ 282.212324] [<d88363f7>] scsi_eh_ready_devs+0x57/0x70 [scsi_mod] > [ 282.292604] [<d883654f>] scsi_unjam_host+0x9f/0xc0 [scsi_mod] > [ 282.369451] [<d8836629>] scsi_error_handler+0xb9/0xe0 [scsi_mod] > [ 282.449734] [<c01034d9>] kernel_thread_helper+0x5/0xc > scsi went ga-ga during insertion of the sym2 driver. Usual culprits cc'ed ;) - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
