Assorted endianess fixes. I'll work on full endianess annotations
later.
Index: scsi-misc-2.6/drivers/message/fusion/mptbase.c
===================================================================
--- scsi-misc-2.6.orig/drivers/message/fusion/mptbase.c 2005-08-17 19:47:15.000000000 +0200
+++ scsi-misc-2.6/drivers/message/fusion/mptbase.c 2005-08-17 19:48:53.000000000 +0200
@@ -2171,7 +2171,7 @@
facts->IOCExceptions = le16_to_cpu(facts->IOCExceptions);
facts->IOCStatus = le16_to_cpu(facts->IOCStatus);
facts->IOCLogInfo = le32_to_cpu(facts->IOCLogInfo);
- status = facts->IOCStatus & MPI_IOCSTATUS_MASK;
+ status = le16_to_cpu(facts->IOCStatus) & MPI_IOCSTATUS_MASK;
/* CHECKME! IOCStatus, IOCLogInfo */
facts->ReplyQueueDepth = le16_to_cpu(facts->ReplyQueueDepth);
@@ -4800,8 +4800,8 @@
pReq->Reserved3 = 0;
pReq->NumAddressBytes = 0x01;
pReq->Reserved4 = 0;
- pReq->DataLength = 0x04;
- pdev = (struct pci_dev *) ioc->pcidev;
+ pReq->DataLength = cpu_to_le16(0x04);
+ pdev = ioc->pcidev;
if (pdev->devfn & 1)
pReq->DeviceAddr = 0xB2;
else
Index: scsi-misc-2.6/drivers/message/fusion/mptctl.c
===================================================================
--- scsi-misc-2.6.orig/drivers/message/fusion/mptctl.c 2005-08-17 19:46:11.000000000 +0200
+++ scsi-misc-2.6/drivers/message/fusion/mptctl.c 2005-08-17 19:47:37.000000000 +0200
@@ -242,7 +242,7 @@
/* Set the command status to GOOD if IOC Status is GOOD
* OR if SCSI I/O cmd and data underrun or recovered error.
*/
- iocStatus = reply->u.reply.IOCStatus & MPI_IOCSTATUS_MASK;
+ iocStatus = le16_to_cpu(reply->u.reply.IOCStatus) & MPI_IOCSTATUS_MASK;
if (iocStatus == MPI_IOCSTATUS_SUCCESS)
ioc->ioctl->status |= MPT_IOCTL_STATUS_COMMAND_GOOD;
Index: scsi-misc-2.6/drivers/message/fusion/mptscsih.c
===================================================================
--- scsi-misc-2.6.orig/drivers/message/fusion/mptscsih.c 2005-08-17 19:46:46.000000000 +0200
+++ scsi-misc-2.6/drivers/message/fusion/mptscsih.c 2005-08-17 19:47:37.000000000 +0200
@@ -3453,7 +3453,7 @@
* some type of error occurred.
*/
MpiRaidActionReply_t *pr = (MpiRaidActionReply_t *)mr;
- if (pr->ActionStatus == MPI_RAID_ACTION_ASTATUS_SUCCESS)
+ if (le16_to_cpu(pr->ActionStatus) == MPI_RAID_ACTION_ASTATUS_SUCCESS)
completionCode = MPT_SCANDV_GOOD;
else
completionCode = MPT_SCANDV_SOME_ERROR;
@@ -4002,9 +4002,9 @@
dnegoprintk(("syncronize cache: id=%d width=0 factor=MPT_ASYNC "
"offset=0 negoFlags=%x request=%x config=%x\n",
id, flags, requested, configuration));
- pcfg1Data->RequestedParameters = le32_to_cpu(requested);
+ pcfg1Data->RequestedParameters = cpu_to_le32(requested);
pcfg1Data->Reserved = 0;
- pcfg1Data->Configuration = le32_to_cpu(configuration);
+ pcfg1Data->Configuration = cpu_to_le32(configuration);
cfg.pageAddr = (bus<<8) | id;
mpt_config(hd->ioc, &cfg);
}
@@ -5254,7 +5254,7 @@
/* Update tmax values with those from Device Page 0.*/
pPage0 = (SCSIDevicePage0_t *) pPage;
if (pPage0) {
- val = cpu_to_le32(pPage0->NegotiatedParameters);
+ val = le32_to_cpu(pPage0->NegotiatedParameters);
dv->max.width = val & MPI_SCSIDEVPAGE0_NP_WIDE ? 1 : 0;
dv->max.offset = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_OFFSET_MASK) >> 16;
dv->max.factor = (val&MPI_SCSIDEVPAGE0_NP_NEG_SYNC_PERIOD_MASK) >> 8;
@@ -5282,12 +5282,12 @@
dv->now.offset, &val, &configuration, dv->now.flags);
dnegoprintk(("Setting Max: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
- pPage1->RequestedParameters = le32_to_cpu(val);
+ pPage1->RequestedParameters = cpu_to_le32(val);
pPage1->Reserved = 0;
- pPage1->Configuration = le32_to_cpu(configuration);
+ pPage1->Configuration = cpu_to_le32(configuration);
}
- ddvprintk(("id=%d width=%d factor=%x offset=%x flags=%x request=%x configuration=%x\n",
+ ddvprintk(("id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x configuration=%x\n",
id, dv->now.width, dv->now.factor, dv->now.offset, dv->now.flags, val, configuration));
break;
@@ -5307,9 +5307,9 @@
offset, &val, &configuration, negoFlags);
dnegoprintk(("Setting Min: id=%d width=%d factor=%x offset=%x negoFlags=%x request=%x config=%x\n",
id, width, factor, offset, negoFlags, val, configuration));
- pPage1->RequestedParameters = le32_to_cpu(val);
+ pPage1->RequestedParameters = cpu_to_le32(val);
pPage1->Reserved = 0;
- pPage1->Configuration = le32_to_cpu(configuration);
+ pPage1->Configuration = cpu_to_le32(configuration);
}
ddvprintk(("id=%d width=%d factor=%x offset=%x request=%x config=%x negoFlags=%x\n",
id, width, factor, offset, val, configuration, negoFlags));
@@ -5383,12 +5383,12 @@
if (pPage1) {
mptscsih_setDevicePage1Flags (width, factor, offset, &val,
&configuration, dv->now.flags);
- dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x flags=%x request=%x config=%x\n",
+ dnegoprintk(("Finish: id=%d width=%d offset=%d factor=%x negoFlags=%x request=%x config=%x\n",
id, width, offset, factor, dv->now.flags, val, configuration));
- pPage1->RequestedParameters = le32_to_cpu(val);
+ pPage1->RequestedParameters = cpu_to_le32(val);
pPage1->Reserved = 0;
- pPage1->Configuration = le32_to_cpu(configuration);
+ pPage1->Configuration = cpu_to_le32(configuration);
}
ddvprintk(("Finish: id=%d offset=%d factor=%x width=%d request=%x config=%x\n",
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
