There is an additional 'build fix' patch that Andrew Morton submitted on
the kernel list (I have changed out his dpr_i2o with dpt_i2o below
though).
---------------------------------------------------
Cc: "Salyzyn, Mark" <mark_salyzyn@xxxxxxxxxxx>
Cc: James Bottomley <James.Bottomley@xxxxxxxxxxxx>
Signed-off-by: Andrew Morton <akpm@xxxxxxxx>
---
drivers/scsi/dpt_i2o.c | 2 +-
1 files changed, 1 insertion(+), 1 deletion(-)
diff -puN drivers/scsi/dpt_i2o.c~dpt_i2o-build-fix
drivers/scsi/dpt_i2o.c
--- devel/drivers/scsi/dpt_i2o.c~dpt_i2o-build-fix 2005-08-09
00:18:51.000000000 -0700
+++ devel-akpm/drivers/scsi/dpt_i2o.c 2005-08-09 00:19:02.000000000
-0700
@@ -907,7 +907,7 @@ static int adpt_install_hba(struct scsi_
raptorFlag = TRUE;
}
- if (pci_request_regions(pDev)) {
+ if (pci_request_regions(pDev, "dpt_i2o")) {
PERROR("dpti: adpt_config_hba: pci request region
failed\n");
return -EINVAL;
}
_
------------------------------------------------------------------------
-
Sincerely -- Mark Salyzyn
-----Original Message-----
From: linux-scsi-owner@xxxxxxxxxxxxxxx
[mailto:linux-scsi-owner@xxxxxxxxxxxxxxx] On Behalf Of Jon Scottorn
Sent: Tuesday, August 09, 2005 12:47 PM
To: unlisted-recipients
Cc: SCSI Mailing List
Subject: Re: Adaptec i2o controller
Thanks for the replies,
After applying the patch, Now I get a compile error
drivers/scsi/dpt_i2o.c: In function `adpt_install_hba':
drivers/scsi/dpt_i2o.c:908: error: too few arguments to function
`pci_request_regions'
drivers/scsi/dpt_i2o.c: In function `adpt_isr':
drivers/scsi/dpt_i2o.c:2037: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2038: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2049: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2050: warning: passing arg 2 of `writel' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2053: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2055: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2062: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2069: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2076: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c: In function `adpt_i2o_to_scsi':
drivers/scsi/dpt_i2o.c:2246: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2250: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2255: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c:2266: warning: passing arg 1 of `readl' makes
pointer from integer without a cast
drivers/scsi/dpt_i2o.c: At top level:
drivers/scsi/dpt_i2o.c:171: warning: `dptids' defined but not used
make[3]: *** [drivers/scsi/dpt_i2o.o] Error 1
make[2]: *** [drivers/scsi] Error 2
make[1]: *** [drivers] Error 2
and I do have only one option selected in the .config file.
Any other thoughts?
Thanks,
Jon
Salyzyn, Mark wrote:
>This dpt_i2o patch *plus* the patch Markus submitted yesterday for the
>i2o driver to the kernel list need to be performed to create the mutual
>exclusion between the two drivers.
>
>Jon, just select one (CONFIG_SCSI_DPT_I2O) or the other (CONFIG_I2O) in
>your .config
>
>Sincerely -- Mark Salyzyn
>
>-----Original Message-----
>From: linux-scsi-owner@xxxxxxxxxxxxxxx
>[mailto:linux-scsi-owner@xxxxxxxxxxxxxxx] On Behalf Of James Bottomley
>Sent: Tuesday, August 09, 2005 12:11 PM
>To: Jon Scottorn
>Cc: SCSI Mailing List
>Subject: Re: Adaptec i2o controller
>
>On Tue, 2005-08-09 at 09:59 -0600, Jon Scottorn wrote:
>
>
>> I have been running a 2.6.8 kernel with the adaptec i2o scsi
>>controller and I went to upgrade to the 2.6.12.4 kernel and when I
>>reboot into that kernel I get a kernel panic. I am wondering either
>>
>>
>what
>
>
>>I have done wrong or what has changed with the i2o driver between the
>>two kernels.
>>Here is the error I get, I am summarizing because I have to type the
>>error in.
>>
>>EIP is at adpt_isr+0x175/0x1f2
>>then has a stack and call trace:
>>(#0001,*0):c01035b2 oops
>>kernel panic - not syncing: Fatal exception in interrupt
>>
>>
>
>Could you try out the patch in this email:
>
>http://marc.theaimsgroup.com/?l=linux-scsi&m=112351014310129
>
>Thanks,
>
>James
>
>
>-
>: send the line "unsubscribe linux-scsi"
in
>the body of a message to majordomo@xxxxxxxxxxxxxxx
>More majordomo info at http://vger.kernel.org/majordomo-info.html
>
>
>
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
