[ANNOUNCE] sdparm 0.94

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



sdparm is a command line utility designed to get and set
SCSI device parameters (cf hdparm for ATA disks). Apart
from SCSI devices (e.g. disks, tapes and enclosures) sdparm
can be used on any device that uses a SCSI command set.
Virtually all CD/DVD drives use the SCSI MMC set irrespective
of the transport. sdparm also can list VPD pages including
the device identification page. sdparm can be used in both
the lk 2.4 and 2.6 series.

The major addition in version 0.94 is a set of commands
mainly for devices with removable media: eject, load,
ready, start, stop and unlock.

For more information and downloads see:
http://www.torque.net/sg/sdparm.html

ChangeLog for sdparm-0.94 [20050728]
  - add CD/DVD (MM) capabilities and mechanical status mode page
  - add Background medium scan (SBC-2 pending) mode subpage
  - add '--command=<cmd>' option with these <cmd>s:
      ready, start, stop, load, eject and unlock
  - add decoding for SCSI Ports VPD page
  - updated to automake version 1.9.5
  - copy of sdparm.html placed in doc directory


Doug Gilbert
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux