lsscsi is a utility that uses sysfs in linux 2.6 series kernels to list information about all SCSI devices and SCSI hosts. Both a compact format (default) which is one line per device and a "classic" format (like the output of 'cat /proc/scsi/scsi') are supported. Some examples: $ lsscsi [0:0:0:0] disk Linux scsi_debug 0004 /dev/sda [1:0:6:0] tape SONY SDT-7000 0192 /dev/st0 $ lsscsi --classic Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: Linux Model: scsi_debug Rev: 0004 Type: Direct-Access ANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 06 Lun: 00 Vendor: SONY Model: SDT-7000 Rev: 0192 Type: Sequential-Access ANSI SCSI revision: 02 Version 0.15 is available at http://www.torque.net/scsi/lsscsi.html This is an experimental version that attempts to find the device name used in the /dev directory rather than the kernel generated name. The kernel generated name of the first SCSI disk discovered is /dev/sda . However in the lk 2.6 series kernels udev may be used to give this device some other name in the /dev directory, for example /dev/root_disk . By default this version will search for the device node name in the /dev directory whose type (i.e. block or char), major and minor numbers match the kernel device information found in sysfs. This change makes a SCSI (or USB, Firewire, etc) CD/DVD drive appear with a name like /dev/scd0 (as most distributions now use) rather than its kernel device node name of sr0 used by sysfs. There are other ways this could be done which would be more efficient in CPU usage, for example by lsscsi using the udevinfo facilities internally. This version of lsscsi can be given a '--kname' option to show the kernel (i.e. sysfs) device node name instead. Note that sysfs and SCSI errors and warning sent to the system log continue to use the kernel device node name. By default lsscsi lists all SCSI devices (or hosts). This version allows select arguments to reduce the number of devices listed. For example "lsscsi 1" will list all channels, targets and luns within host1. A single SCSI device can be listed with 'lsscsi 1 0 0 0' (or 'lsscsi 1:0:0:0' or 'lsscsi [1:0:0:0]'). See man page for more information. This version of lsscsi uses the facilities of the scandir() library call to both select (filter) and sort the SCSI devices (or hosts) it finds in sysfs. Since libsysfs (version 1.2) doesn't have the ability to filter then this version of lsscsi uses scandir() [and not libsysfs]. Evidently a new version 2.0 API for libsysfs is under development (and I have requested a scandir() like select+sort facility). Extra SCSI device and host attributes (as found in lk 2.6.12) can be seen by using the '--long' option twice (or more conveniently using '-ll'). Attributes are listed as "<name>=<value>" pairs, one per line (indented two spaces) when the '-lll' option is given. ChangeLog: Version 0.15 2005/6/29 - option '-ll' gives more attributes and '-lll' gives attributes one per line - change reporting if device node: - use "match major+minor" with "/dev" directory (default) - use synthetic device node names when '--kname' given {this was the default in earlier versions} - add filtering, sync with lk 2.6.12 {e.g. 'lsscsi 1' lists all SCSI devices on host1} - convert to autotools - builds on version 0.13 (does not use libsysfs) {because dlist_sort_custom() does not have filter() callback} Thanks to Nate Dailey for the /dev scanning code. Comments welcome. Doug Gilbert - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
