[PATCH 46/82] remove unused drivers/scsi/pci2000.h

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



changing CONFIG_LOCALVERSION rebuilds too much, for no appearent reason.
pci2000.h is unused, so drop the whole file

Signed-off-by: Olaf Hering <olh@xxxxxxx>

drivers/scsi/pci2000.h |  200 -------------------------------------------------
1 files changed, 200 deletions(-)

Index: linux-2.6.13-rc2-mm1/drivers/scsi/pci2000.h
===================================================================
--- linux-2.6.13-rc2-mm1.orig/drivers/scsi/pci2000.h
+++ /dev/null
@@ -1,200 +0,0 @@
-/****************************************************************************
- * Perceptive Solutions, Inc. PCI-2000 device driver for Linux.
- *
- * pci2000.h - Linux Host Driver for PCI-2000 IntelliCache SCSI Adapters
- *
- * Copyright (c) 1997-1999 Perceptive Solutions, Inc.
- * All Rights Reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that redistributions of source
- * code retain the above copyright notice and this comment without
- * modification.
- *
- * Technical updates and product information at:
- *  http://www.psidisk.com
- *
- * Please send questions, comments, bug reports to:
- *  tech@xxxxxxxxxxx Technical Support
- *
- ****************************************************************************/
-#ifndef _PCI2000_H
-#define _PCI2000_H
-
-#include <linux/types.h>
-
-#ifndef	PSI_EIDE_SCSIOP
-#define	PSI_EIDE_SCSIOP	1
-
-#ifndef LINUX_VERSION_CODE
-#include <linux/version.h>
-#endif
-#define	LINUXVERSION(v,p,s)    (((v)<<16) + ((p)<<8) + (s))
-
-/************************************************/
-/*		definition of standard data types		*/
-/************************************************/
-#define	CHAR	char
-#define	UCHAR	unsigned char
-#define	SHORT	short
-#define	USHORT	unsigned short
-#define	BOOL	long
-#define	LONG	long
-#define	ULONG	unsigned long
-#define	VOID	void
-
-typedef	CHAR	*PCHAR;
-typedef	UCHAR	*PUCHAR;
-typedef	SHORT	*PSHORT;
-typedef	USHORT	*PUSHORT;
-typedef	BOOL	*PBOOL;
-typedef	LONG	*PLONG;
-typedef	ULONG	*PULONG;
-typedef	VOID	*PVOID;
-
-
-/************************************************/
-/*		Misc. macros			 				*/
-/************************************************/
-#define ANY2SCSI(up, p)					-((UCHAR *)up)[0] = (((ULONG)(p)) >> 8);	-((UCHAR *)up)[1] = ((ULONG)(p));
-
-#define SCSI2LONG(up)					-( (((long)*(((UCHAR *)up))) << 16)		-+ (((long)(((UCHAR *)up)[1])) << 8)		-+ ((long)(((UCHAR *)up)[2])) )
-
-#define XANY2SCSI(up, p)				-((UCHAR *)up)[0] = ((long)(p)) >> 24;	-((UCHAR *)up)[1] = ((long)(p)) >> 16;	-((UCHAR *)up)[2] = ((long)(p)) >> 8;	-((UCHAR *)up)[3] = ((long)(p));
-
-#define XSCSI2LONG(up)					-( (((long)(((UCHAR *)up)[0])) << 24)	-+ (((long)(((UCHAR *)up)[1])) << 16)	-+ (((long)(((UCHAR *)up)[2])) <<  8)	-+ ((long)(((UCHAR *)up)[3])) )
-
-/************************************************/
-/*		SCSI CDB operation codes 				*/
-/************************************************/
-#define SCSIOP_TEST_UNIT_READY		0x00
-#define SCSIOP_REZERO_UNIT			0x01
-#define SCSIOP_REWIND				0x01
-#define SCSIOP_REQUEST_BLOCK_ADDR	0x02
-#define SCSIOP_REQUEST_SENSE		0x03
-#define SCSIOP_FORMAT_UNIT			0x04
-#define SCSIOP_READ_BLOCK_LIMITS	0x05
-#define SCSIOP_REASSIGN_BLOCKS		0x07
-#define SCSIOP_READ6				0x08
-#define SCSIOP_RECEIVE				0x08
-#define SCSIOP_WRITE6				0x0A
-#define SCSIOP_PRINT				0x0A
-#define SCSIOP_SEND					0x0A
-#define SCSIOP_SEEK6				0x0B
-#define SCSIOP_TRACK_SELECT			0x0B
-#define SCSIOP_SLEW_PRINT			0x0B
-#define SCSIOP_SEEK_BLOCK			0x0C
-#define SCSIOP_PARTITION			0x0D
-#define SCSIOP_READ_REVERSE			0x0F
-#define SCSIOP_WRITE_FILEMARKS		0x10
-#define SCSIOP_FLUSH_BUFFER			0x10
-#define SCSIOP_SPACE				0x11
-#define SCSIOP_INQUIRY				0x12
-#define SCSIOP_VERIFY6				0x13
-#define SCSIOP_RECOVER_BUF_DATA		0x14
-#define SCSIOP_MODE_SELECT			0x15
-#define SCSIOP_RESERVE_UNIT			0x16
-#define SCSIOP_RELEASE_UNIT			0x17
-#define SCSIOP_COPY					0x18
-#define SCSIOP_ERASE				0x19
-#define SCSIOP_MODE_SENSE			0x1A
-#define SCSIOP_START_STOP_UNIT		0x1B
-#define SCSIOP_STOP_PRINT			0x1B
-#define SCSIOP_LOAD_UNLOAD			0x1B
-#define SCSIOP_RECEIVE_DIAGNOSTIC	0x1C
-#define SCSIOP_SEND_DIAGNOSTIC		0x1D
-#define SCSIOP_MEDIUM_REMOVAL		0x1E
-#define SCSIOP_READ_CAPACITY		0x25
-#define SCSIOP_READ					0x28
-#define SCSIOP_WRITE				0x2A
-#define SCSIOP_SEEK					0x2B
-#define SCSIOP_LOCATE				0x2B
-#define SCSIOP_WRITE_VERIFY			0x2E
-#define SCSIOP_VERIFY				0x2F
-#define SCSIOP_SEARCH_DATA_HIGH		0x30
-#define SCSIOP_SEARCH_DATA_EQUAL	0x31
-#define SCSIOP_SEARCH_DATA_LOW		0x32
-#define SCSIOP_SET_LIMITS			0x33
-#define SCSIOP_READ_POSITION		0x34
-#define SCSIOP_SYNCHRONIZE_CACHE	0x35
-#define SCSIOP_COMPARE				0x39
-#define SCSIOP_COPY_COMPARE			0x3A
-#define SCSIOP_WRITE_DATA_BUFF		0x3B
-#define SCSIOP_READ_DATA_BUFF		0x3C
-#define SCSIOP_CHANGE_DEFINITION	0x40
-#define SCSIOP_READ_SUB_CHANNEL		0x42
-#define SCSIOP_READ_TOC				0x43
-#define SCSIOP_READ_HEADER			0x44
-#define SCSIOP_PLAY_AUDIO			0x45
-#define SCSIOP_PLAY_AUDIO_MSF		0x47
-#define SCSIOP_PLAY_TRACK_INDEX		0x48
-#define SCSIOP_PLAY_TRACK_RELATIVE	0x49
-#define SCSIOP_PAUSE_RESUME			0x4B
-#define SCSIOP_LOG_SELECT			0x4C
-#define SCSIOP_LOG_SENSE			0x4D
-#define SCSIOP_MODE_SELECT10		0x55
-#define SCSIOP_MODE_SENSE10			0x5A
-#define SCSIOP_LOAD_UNLOAD_SLOT		0xA6
-#define SCSIOP_MECHANISM_STATUS		0xBD
-#define SCSIOP_READ_CD				0xBE
-
-// SCSI read capacity structure
-typedef	struct _READ_CAPACITY_DATA
-	{
-	ULONG blks;				/* total blocks (converted to little endian) */
-	ULONG blksiz;			/* size of each (converted to little endian) */
-	}	READ_CAPACITY_DATA, *PREAD_CAPACITY_DATA;
-
-// SCSI inquiry data
-typedef struct _INQUIRYDATA
-	{
-	UCHAR DeviceType			:5;
-	UCHAR DeviceTypeQualifier	:3;
-	UCHAR DeviceTypeModifier	:7;
-	UCHAR RemovableMedia		:1;
-    UCHAR Versions;
-    UCHAR ResponseDataFormat;
-    UCHAR AdditionalLength;
-    UCHAR Reserved[2];
-	UCHAR SoftReset				:1;
-	UCHAR CommandQueue			:1;
-	UCHAR Reserved2				:1;
-	UCHAR LinkedCommands		:1;
-	UCHAR Synchronous			:1;
-	UCHAR Wide16Bit				:1;
-	UCHAR Wide32Bit				:1;
-	UCHAR RelativeAddressing	:1;
-    UCHAR VendorId[8];
-    UCHAR ProductId[16];
-    UCHAR ProductRevisionLevel[4];
-    UCHAR VendorSpecific[20];
-    UCHAR Reserved3[40];
-	}	INQUIRYDATA, *PINQUIRYDATA;
-
-#endif
-
-// function prototypes
-int Pci2000_Detect			(Scsi_Host_Template *tpnt);
-int Pci2000_Command			(Scsi_Cmnd *SCpnt);
-int Pci2000_QueueCommand	(Scsi_Cmnd *SCpnt, void (*done)(Scsi_Cmnd *));
-int Pci2000_Abort			(Scsi_Cmnd *SCpnt);
-int Pci2000_Reset			(Scsi_Cmnd *SCpnt, unsigned int flags);
-int Pci2000_Release			(struct Scsi_Host *pshost);
-int Pci2000_BiosParam		(struct scsi_device *sdev,
-					struct block_device *bdev,
-					sector_t capacity, int geom[]);
-
-#endif
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux