Consolidate ISP24xx chip reset logic. Consolidate near-duplicate RISC reset logic from qla24xx_reset_chip() and qla24xx_chip_diag(). Also, after initiating a soft-reset, insure the firmware has completed all NVRAM accesses before continuing. Signed-off-by: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx> --- drivers/scsi/qla2xxx/qla_dbg.c | 11 ++++++ drivers/scsi/qla2xxx/qla_init.c | 78 ++++++++++++++++----------------------- 2 files changed, 42 insertions(+), 47 deletions(-) 644a5b0d24ceadbc1ea50ddd494e2386eec97004 diff --git a/drivers/scsi/qla2xxx/qla_dbg.c b/drivers/scsi/qla2xxx/qla_dbg.c --- a/drivers/scsi/qla2xxx/qla_dbg.c +++ b/drivers/scsi/qla2xxx/qla_dbg.c @@ -1526,6 +1526,17 @@ qla24xx_fw_dump(scsi_qla_host_t *ha, int WRT_REG_DWORD(®->ctrl_status, CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); + RD_REG_DWORD(®->ctrl_status); + + /* Wait for firmware to complete NVRAM accesses. */ + udelay(5); + mb[0] = (uint32_t) RD_REG_WORD(®->mailbox0); + for (cnt = 10000 ; cnt && mb[0]; cnt--) { + udelay(5); + mb[0] = (uint32_t) RD_REG_WORD(®->mailbox0); + barrier(); + } + udelay(20); for (cnt = 0; cnt < 30000; cnt++) { if ((RD_REG_DWORD(®->ctrl_status) & diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -564,20 +564,18 @@ qla2x00_reset_chip(scsi_qla_host_t *ha) } /** - * qla24xx_reset_chip() - Reset ISP24xx chip. + * qla24xx_reset_risc() - Perform full reset of ISP24xx RISC. * @ha: HA context * * Returns 0 on success. */ -void -qla24xx_reset_chip(scsi_qla_host_t *ha) +static inline void +qla24xx_reset_risc(scsi_qla_host_t *ha) { unsigned long flags = 0; struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; uint32_t cnt, d2; - ha->isp_ops.disable_intrs(ha); - spin_lock_irqsave(&ha->hardware_lock, flags); /* Reset RISC. */ @@ -591,6 +589,17 @@ qla24xx_reset_chip(scsi_qla_host_t *ha) WRT_REG_DWORD(®->ctrl_status, CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); + RD_REG_DWORD(®->ctrl_status); + + /* Wait for firmware to complete NVRAM accesses. */ + udelay(5); + d2 = (uint32_t) RD_REG_WORD(®->mailbox0); + for (cnt = 10000 ; cnt && d2; cnt--) { + udelay(5); + d2 = (uint32_t) RD_REG_WORD(®->mailbox0); + barrier(); + } + udelay(20); d2 = RD_REG_DWORD(®->ctrl_status); for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) { @@ -619,6 +628,21 @@ qla24xx_reset_chip(scsi_qla_host_t *ha) } /** + * qla24xx_reset_chip() - Reset ISP24xx chip. + * @ha: HA context + * + * Returns 0 on success. + */ +void +qla24xx_reset_chip(scsi_qla_host_t *ha) +{ + ha->isp_ops.disable_intrs(ha); + + /* Perform RISC reset. */ + qla24xx_reset_risc(ha); +} + +/** * qla2x00_chip_diag() - Test chip for proper operation. * @ha: HA context * @@ -753,49 +777,9 @@ int qla24xx_chip_diag(scsi_qla_host_t *ha) { int rval; - struct device_reg_24xx __iomem *reg = &ha->iobase->isp24; - unsigned long flags = 0; - uint32_t cnt, d2; - - spin_lock_irqsave(&ha->hardware_lock, flags); - /* Reset RISC. */ - WRT_REG_DWORD(®->ctrl_status, CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); - for (cnt = 0; cnt < 30000; cnt++) { - if ((RD_REG_DWORD(®->ctrl_status) & - CSRX_DMA_ACTIVE) == 0) - break; - - udelay(10); - } - - WRT_REG_DWORD(®->ctrl_status, - CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES); - udelay(20); - d2 = RD_REG_DWORD(®->ctrl_status); - for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) { - udelay(5); - d2 = RD_REG_DWORD(®->ctrl_status); - barrier(); - } - - WRT_REG_DWORD(®->hccr, HCCRX_SET_RISC_RESET); - RD_REG_DWORD(®->hccr); - - WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); - RD_REG_DWORD(®->hccr); - - WRT_REG_DWORD(®->hccr, HCCRX_CLR_RISC_RESET); - RD_REG_DWORD(®->hccr); - - d2 = (uint32_t) RD_REG_WORD(®->mailbox0); - for (cnt = 6000000 ; cnt && d2; cnt--) { - udelay(5); - d2 = (uint32_t) RD_REG_WORD(®->mailbox0); - barrier(); - } - - spin_unlock_irqrestore(&ha->hardware_lock, flags); + /* Perform RISC reset. */ + qla24xx_reset_risc(ha); ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024; ------------ - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html