[PATCH 11/14] scsi/lpfc_scsi: use msleep() instead of schedule_timeout()

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



From: Nishanth Aravamudan <nacc@xxxxxxxxxx>

Description: Replace schedule_timeout() with msleep() to guarantee the
task delays as expected.

Patch is compile-tested.

Signed-off-by: Nishanth Aravamudan <nacc@xxxxxxxxxx>

---

 lpfc_scsi.c |   13 +++++--------
 1 files changed, 5 insertions(+), 8 deletions(-)

diff -urp 2.6.13-rc2-kj/drivers/scsi/lpfc/lpfc_scsi.c 2.6.13-rc2-kj-dev/drivers/scsi/lpfc/lpfc_scsi.c
--- 2.6.13-rc2-kj/drivers/scsi/lpfc/lpfc_scsi.c	2005-07-06 07:57:19.000000000 -0700
+++ 2.6.13-rc2-kj-dev/drivers/scsi/lpfc/lpfc_scsi.c	2005-07-06 19:20:41.000000000 -0700
@@ -24,6 +24,7 @@
 
 #include <linux/pci.h>
 #include <linux/interrupt.h>
+#include <linux/delay.h>
 
 #include <scsi/scsi.h>
 #include <scsi/scsi_device.h>
@@ -885,8 +886,7 @@ __lpfc_abort_handler(struct scsi_cmnd *c
 		while (cmnd->host_scribble)
 		{
 			spin_unlock_irq(phba->host->host_lock);
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			schedule_timeout(LPFC_ABORT_WAIT*HZ);
+			msleep(LPFC_ABORT_WAIT * 1000);
 			spin_lock_irq(phba->host->host_lock);
 			if (++loop_count
 			    > (2 * phba->cfg_nodev_tmo)/LPFC_ABORT_WAIT)
@@ -952,8 +952,7 @@ __lpfc_reset_lun_handler(struct scsi_cmn
 
 		if (pnode->nlp_state != NLP_STE_MAPPED_NODE) {
 			spin_unlock_irq(phba->host->host_lock);
-			set_current_state(TASK_UNINTERRUPTIBLE);
-			schedule_timeout( HZ/2);
+			msleep(500);
 			spin_lock_irq(phba->host->host_lock);
 		}
 		if ((pnode) && (pnode->nlp_state == NLP_STE_MAPPED_NODE))
@@ -1011,8 +1010,7 @@ __lpfc_reset_lun_handler(struct scsi_cmn
 				       cmnd->device->id, cmnd->device->lun,
 				       LPFC_CTX_LUN))) {
 		spin_unlock_irq(phba->host->host_lock);
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(LPFC_RESET_WAIT*HZ);
+		msleep(LPFC_RESET_WAIT * 1000);
 		spin_lock_irq(phba->host->host_lock);
 
 		if (++loopcnt
@@ -1110,8 +1108,7 @@ __lpfc_reset_bus_handler(struct scsi_cmn
 				&phba->sli.ring[phba->sli.fcp_ring],
 				0, 0, LPFC_CTX_HOST))) {
 		spin_unlock_irq(phba->host->host_lock);
-		set_current_state(TASK_UNINTERRUPTIBLE);
-		schedule_timeout(LPFC_RESET_WAIT*HZ);
+		msleep(LPFC_RESET_WAIT * HZ);
 		spin_lock_irq(phba->host->host_lock);
 
 		if (++loopcnt
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux