Final glue-code for ISP24xx.
Add appropriate glue-code for ISP24xx support within
OS and initialization sections of driver.
Signed-off-by: Andrew Vasquez <andrew.vasquez@xxxxxxxxxx>
---
drivers/scsi/qla2xxx/Makefile | 3
drivers/scsi/qla2xxx/qla_attr.c | 32 +
drivers/scsi/qla2xxx/qla_gbl.h | 1
drivers/scsi/qla2xxx/qla_init.c | 1131 ++++++++++++++++++++++++++++++-------
drivers/scsi/qla2xxx/qla_inline.h | 21 +
drivers/scsi/qla2xxx/qla_os.c | 245 ++++++--
6 files changed, 1170 insertions(+), 263 deletions(-)
diff --git a/drivers/scsi/qla2xxx/Makefile b/drivers/scsi/qla2xxx/Makefile
--- a/drivers/scsi/qla2xxx/Makefile
+++ b/drivers/scsi/qla2xxx/Makefile
@@ -1,4 +1,6 @@
EXTRA_CFLAGS += -DUNIQUE_FW_NAME
+CONFIG_SCSI_QLA24XX=m
+EXTRA_CFLAGS += -DCONFIG_SCSI_QLA24XX -DCONFIG_SCSI_QLA24XX_MODULE
qla2xxx-y := qla_os.o qla_init.o qla_mbx.o qla_iocb.o qla_isr.o qla_gs.o \
qla_dbg.o qla_sup.o qla_rscn.o qla_attr.o
@@ -14,3 +16,4 @@ obj-$(CONFIG_SCSI_QLA22XX) += qla2xxx.o
obj-$(CONFIG_SCSI_QLA2300) += qla2xxx.o qla2300.o
obj-$(CONFIG_SCSI_QLA2322) += qla2xxx.o qla2322.o
obj-$(CONFIG_SCSI_QLA6312) += qla2xxx.o qla6312.o
+obj-$(CONFIG_SCSI_QLA24XX) += qla2xxx.o
diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c
--- a/drivers/scsi/qla2xxx/qla_attr.c
+++ b/drivers/scsi/qla2xxx/qla_attr.c
@@ -63,23 +63,29 @@ qla2x00_sysfs_write_fw_dump(struct kobje
ha->host_no);
vfree(ha->fw_dump_buffer);
- free_pages((unsigned long)ha->fw_dump,
- ha->fw_dump_order);
+ if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha))
+ free_pages((unsigned long)ha->fw_dump,
+ ha->fw_dump_order);
ha->fw_dump_reading = 0;
ha->fw_dump_buffer = NULL;
ha->fw_dump = NULL;
+ ha->fw_dumped = 0;
}
break;
case 1:
- if (ha->fw_dump != NULL && !ha->fw_dump_reading) {
+ if ((ha->fw_dump || ha->fw_dumped) && !ha->fw_dump_reading) {
ha->fw_dump_reading = 1;
- dump_size = FW_DUMP_SIZE_1M;
- if (ha->fw_memory_size < 0x20000)
- dump_size = FW_DUMP_SIZE_128K;
- else if (ha->fw_memory_size < 0x80000)
- dump_size = FW_DUMP_SIZE_512K;
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ dump_size = FW_DUMP_SIZE_24XX;
+ else {
+ dump_size = FW_DUMP_SIZE_1M;
+ if (ha->fw_memory_size < 0x20000)
+ dump_size = FW_DUMP_SIZE_128K;
+ else if (ha->fw_memory_size < 0x80000)
+ dump_size = FW_DUMP_SIZE_512K;
+ }
ha->fw_dump_buffer = (char *)vmalloc(dump_size);
if (ha->fw_dump_buffer == NULL) {
qla_printk(KERN_WARNING, ha,
@@ -94,9 +100,11 @@ qla2x00_sysfs_write_fw_dump(struct kobje
ha->host_no);
memset(ha->fw_dump_buffer, 0, dump_size);
if (IS_QLA2100(ha) || IS_QLA2200(ha))
- qla2100_ascii_fw_dump(ha);
- else
- qla2300_ascii_fw_dump(ha);
+ qla2100_ascii_fw_dump(ha);
+ else if (IS_QLA23XX(ha))
+ qla2300_ascii_fw_dump(ha);
+ else if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ qla24xx_ascii_fw_dump(ha);
ha->fw_dump_buffer_len = strlen(ha->fw_dump_buffer);
}
break;
@@ -184,7 +192,7 @@ static struct bin_attribute sysfs_nvram_
.mode = S_IRUSR | S_IWUSR,
.owner = THIS_MODULE,
},
- .size = 0;
+ .size = 0,
.read = qla2x00_sysfs_read_nvram,
.write = qla2x00_sysfs_write_nvram,
};
diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h
--- a/drivers/scsi/qla2xxx/qla_gbl.h
+++ b/drivers/scsi/qla2xxx/qla_gbl.h
@@ -59,6 +59,7 @@ extern int ql2xplogiabsentdevice;
extern int ql2xenablezio;
extern int ql2xintrdelaytimer;
extern int ql2xloginretrycount;
+extern int ql2xfwloadbin;
extern void qla2x00_sp_compl(scsi_qla_host_t *, srb_t *);
diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c
--- a/drivers/scsi/qla2xxx/qla_init.c
+++ b/drivers/scsi/qla2xxx/qla_init.c
@@ -19,6 +19,8 @@
#include "qla_def.h"
#include <linux/delay.h>
+#include <linux/vmalloc.h>
+#include <linux/firmware.h>
#include <scsi/scsi_transport_fc.h>
#include "qla_devtbl.h"
@@ -39,6 +41,7 @@ static int qla2x00_isp_firmware(scsi_qla
static void qla2x00_reset_chip(scsi_qla_host_t *);
static int qla2x00_chip_diag(scsi_qla_host_t *);
static void qla2x00_resize_request_q(scsi_qla_host_t *);
+static int qla2x00_load_risc(scsi_qla_host_t *, uint32_t *);
static int qla2x00_setup_chip(scsi_qla_host_t *);
static void qla2x00_init_response_q_entries(scsi_qla_host_t *);
static int qla2x00_init_rings(scsi_qla_host_t *);
@@ -57,6 +60,11 @@ static int qla2x00_fabric_dev_login(scsi
static int qla2x00_restart_isp(scsi_qla_host_t *);
static void qla2x00_reset_adapter(scsi_qla_host_t *);
+static int qla24xx_nvram_config(scsi_qla_host_t *);
+static int qla24xx_load_risc_flash(scsi_qla_host_t *, uint32_t *);
+static int qla24xx_load_risc_hotplug(scsi_qla_host_t *, uint32_t *);
+static void qla24xx_update_fw_options(scsi_qla_host_t *);
+
/****************************************************************************/
/* QLogic ISP2x00 Hardware Support Functions. */
/****************************************************************************/
@@ -102,6 +110,7 @@ qla2x00_initialize_adapter(scsi_qla_host
qla2x00_reset_chip(ha);
qla_printk(KERN_INFO, ha, "Configure NVRAM parameters...\n");
+
qla2x00_nvram_config(ha);
qla_printk(KERN_INFO, ha, "Verifying loaded RISC code...\n");
@@ -134,6 +143,9 @@ check_fw_ready_again:
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
+ /* Issue a marker after FW becomes ready. */
+ qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
+
/*
* Wait at most MAX_TARGET RSCNs for a stable
* link.
@@ -177,7 +189,6 @@ check_fw_ready_again:
if (rval == QLA_SUCCESS) {
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
- ha->marker_needed = 1;
qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
ha->marker_needed = 0;
@@ -225,64 +236,111 @@ qla2x00_pci_config(scsi_qla_host_t *ha)
pci_read_config_word(ha->pdev, PCI_COMMAND, &w);
w |= mwi | (PCI_COMMAND_PARITY | PCI_COMMAND_SERR);
- /* Get PCI bus information. */
- spin_lock_irqsave(&ha->hardware_lock, flags);
- ha->pci_attr = RD_REG_WORD(&ha->iobase->ctrl_status);
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ int pcix_cmd_reg, pcie_dctl_reg;
+ struct device_reg_24xx __iomem *reg24 =
+ (struct device_reg_24xx __iomem *)ha->iobase;
- if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
- pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER, 0x80);
+ /* Get PCI bus information. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->pci_attr = RD_REG_DWORD(®24->ctrl_status);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
- /* PCI Specification Revision 2.3 changes */
- if (IS_QLA2322(ha) || IS_QLA6322(ha))
- /* Command Register - Reset Interrupt Disable. */
- w &= ~PCI_COMMAND_INTX_DISABLE;
+ w &= ~PCI_COMMAND_INTX_DISABLE;
- /*
- * If this is a 2300 card and not 2312, reset the
- * COMMAND_INVALIDATE due to a bug in the 2300. Unfortunately,
- * the 2310 also reports itself as a 2300 so we need to get the
- * fb revision level -- a 6 indicates it really is a 2300 and
- * not a 2310.
- */
- if (IS_QLA2300(ha)) {
- spin_lock_irqsave(&ha->hardware_lock, flags);
+ /* PCI-X -- adjust Maximum Memory Read Byte Count (2048). */
+ pcix_cmd_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_PCIX);
+ if (pcix_cmd_reg) {
+ uint16_t pcix_cmd;
+
+ pcix_cmd_reg += PCI_X_CMD;
+ pci_read_config_word(ha->pdev, pcix_cmd_reg,
+ &pcix_cmd);
+ pcix_cmd &= ~PCI_X_CMD_MAX_READ;
+ pcix_cmd |= 0x0008;
+ pci_write_config_word(ha->pdev, pcix_cmd_reg,
+ pcix_cmd);
+ }
+
+ /* PCIe -- adjust Maximum Read Request Size (2048). */
+ pcie_dctl_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+ if (pcie_dctl_reg) {
+ uint16_t pcie_dctl;
+
+ pcie_dctl_reg += PCI_EXP_DEVCTL;
+ pci_read_config_word(ha->pdev, pcie_dctl_reg,
+ &pcie_dctl);
+ pcie_dctl &= ~PCI_EXP_DEVCTL_READRQ;
+ pcie_dctl |= 0x4000;
+ pci_write_config_word(ha->pdev, pcie_dctl_reg,
+ pcie_dctl);
+ }
+ } else {
+ /* Get PCI bus information. */
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ ha->pci_attr = (uint32_t)RD_REG_WORD(&ha->iobase->ctrl_status);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
- /* Pause RISC. */
- WRT_REG_WORD(&ha->iobase->hccr, HCCR_PAUSE_RISC);
- for (cnt = 0; cnt < 30000; cnt++) {
- if ((RD_REG_WORD(&ha->iobase->hccr) &
- HCCR_RISC_PAUSE) != 0)
- break;
-
- udelay(10);
- }
+ if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
+ pci_write_config_byte(ha->pdev, PCI_LATENCY_TIMER,
+ 0x80);
- /* Select FPM registers. */
- WRT_REG_WORD(&ha->iobase->ctrl_status, 0x20);
- RD_REG_WORD(&ha->iobase->ctrl_status);
+ /* PCI Specification Revision 2.3 changes */
+ if (IS_QLA2322(ha) || IS_QLA6322(ha))
+ /*
+ * Command Register - Reset Interrupt Disable.
+ */
+ w &= ~PCI_COMMAND_INTX_DISABLE;
- /* Get the fb rev level */
- ha->fb_rev = RD_FB_CMD_REG(ha, ha->iobase);
+ /*
+ * If this is a 2300 card and not 2312, reset the
+ * COMMAND_INVALIDATE due to a bug in the 2300.
+ * Unfortunately, the 2310 also reports itself as a
+ * 2300 so we need to get the fb revision level -- a 6
+ * indicates it really is a 2300 and not a 2310.
+ */
+ if (IS_QLA2300(ha)) {
+ spin_lock_irqsave(&ha->hardware_lock, flags);
- if (ha->fb_rev == FPM_2300)
- w &= ~PCI_COMMAND_INVALIDATE;
+ /* Pause RISC. */
+ WRT_REG_WORD(&ha->iobase->hccr,
+ HCCR_PAUSE_RISC);
+ for (cnt = 0; cnt < 30000; cnt++) {
+ if ((RD_REG_WORD(&ha->iobase->hccr) &
+ HCCR_RISC_PAUSE) != 0)
+ break;
- /* Deselect FPM registers. */
- WRT_REG_WORD(&ha->iobase->ctrl_status, 0x0);
- RD_REG_WORD(&ha->iobase->ctrl_status);
+ udelay(10);
+ }
- /* Release RISC module. */
- WRT_REG_WORD(&ha->iobase->hccr, HCCR_RELEASE_RISC);
- for (cnt = 0; cnt < 30000; cnt++) {
- if ((RD_REG_WORD(&ha->iobase->hccr) &
- HCCR_RISC_PAUSE) == 0)
- break;
-
- udelay(10);
- }
+ /* Select FPM registers. */
+ WRT_REG_WORD(&ha->iobase->ctrl_status, 0x20);
+ RD_REG_WORD(&ha->iobase->ctrl_status);
+
+ /* Get the fb rev level */
+ ha->fb_rev = RD_FB_CMD_REG(ha, ha->iobase);
+
+ if (ha->fb_rev == FPM_2300)
+ w &= ~PCI_COMMAND_INVALIDATE;
+
+ /* Deselect FPM registers. */
+ WRT_REG_WORD(&ha->iobase->ctrl_status, 0x0);
+ RD_REG_WORD(&ha->iobase->ctrl_status);
+
+ /* Release RISC module. */
+ WRT_REG_WORD(&ha->iobase->hccr,
+ HCCR_RELEASE_RISC);
+ for (cnt = 0; cnt < 30000; cnt++) {
+ if ((RD_REG_WORD(&ha->iobase->hccr) &
+ HCCR_RISC_PAUSE) == 0)
+ break;
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ udelay(10);
+ }
+
+ spin_unlock_irqrestore(&ha->hardware_lock,
+ flags);
+ }
}
}
@@ -316,7 +374,9 @@ qla2x00_isp_firmware(scsi_qla_host_t *ha
qla_printk(KERN_INFO, ha, "RISC CODE NOT loaded\n");
/* Verify checksum of loaded RISC code. */
- rval = qla2x00_verify_checksum(ha);
+ rval = qla2x00_verify_checksum(ha,
+ IS_QLA24XX(ha) || IS_QLA25XX(ha) ? RISC_SADDRESS :
+ *ha->brd_info->fw_info[0].fwstart);
}
if (rval) {
@@ -342,6 +402,59 @@ qla2x00_reset_chip(scsi_qla_host_t *ha)
unsigned long mbx_flags = 0;
uint16_t cmd;
+
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ struct device_reg_24xx __iomem *reg24 =
+ (struct device_reg_24xx __iomem *)ha->iobase;
+ uint32_t d2;
+
+ /* Disable ISP interrupts. */
+ qla2x00_disable_intrs(ha);
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ /* Reset RISC. */
+ WRT_REG_DWORD(®24->ctrl_status,
+ CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
+ for (cnt = 0; cnt < 30000; cnt++) {
+ if ((RD_REG_DWORD(®24->ctrl_status) &
+ CSRX_DMA_ACTIVE) == 0)
+ break;
+
+ udelay(10);
+ }
+
+ WRT_REG_DWORD(®24->ctrl_status,
+ CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
+ udelay(20);
+ d2 = RD_REG_DWORD(®24->ctrl_status);
+ for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) {
+ udelay(5);
+ d2 = RD_REG_DWORD(®24->ctrl_status);
+ barrier();
+ }
+
+ WRT_REG_DWORD(®24->hccr, HCCRX_SET_RISC_RESET);
+ RD_REG_DWORD(®24->hccr); /* PCI Posting. */
+
+ WRT_REG_DWORD(®24->hccr, HCCRX_REL_RISC_PAUSE);
+ RD_REG_DWORD(®24->hccr); /* PCI Posting. */
+
+ WRT_REG_DWORD(®24->hccr, HCCRX_CLR_RISC_RESET);
+ RD_REG_DWORD(®24->hccr); /* PCI Posting. */
+
+ d2 = (uint32_t) RD_REG_WORD(®24->mailbox0);
+ for (cnt = 6000000 ; cnt && d2; cnt--) {
+ udelay(5);
+ d2 = (uint32_t) RD_REG_WORD(®24->mailbox0);
+ barrier();
+ }
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ return;
+ }
+
/* Disable ISP interrupts. */
qla2x00_disable_intrs(ha);
@@ -497,6 +610,69 @@ qla2x00_chip_diag(scsi_qla_host_t *ha)
uint32_t cnt;
uint16_t mb[5];
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ struct device_reg_24xx __iomem *reg24 =
+ (struct device_reg_24xx __iomem *)ha->iobase;
+ uint32_t d2;
+
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+
+ /* Reset RISC. */
+ WRT_REG_DWORD(®24->ctrl_status,
+ CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
+ for (cnt = 0; cnt < 30000; cnt++) {
+ if ((RD_REG_DWORD(®24->ctrl_status) &
+ CSRX_DMA_ACTIVE) == 0)
+ break;
+
+ udelay(10);
+ }
+
+ WRT_REG_DWORD(®24->ctrl_status,
+ CSRX_ISP_SOFT_RESET|CSRX_DMA_SHUTDOWN|MWB_4096_BYTES);
+ udelay(20);
+ d2 = RD_REG_DWORD(®24->ctrl_status);
+ for (cnt = 6000000 ; cnt && (d2 & CSRX_ISP_SOFT_RESET); cnt--) {
+ udelay(5);
+ d2 = RD_REG_DWORD(®24->ctrl_status);
+ barrier();
+ }
+
+ WRT_REG_DWORD(®24->hccr, HCCRX_SET_RISC_RESET);
+ RD_REG_DWORD(®24->hccr); /* PCI Posting. */
+
+ WRT_REG_DWORD(®24->hccr, HCCRX_REL_RISC_PAUSE);
+ RD_REG_DWORD(®24->hccr); /* PCI Posting. */
+
+ WRT_REG_DWORD(®24->hccr, HCCRX_CLR_RISC_RESET);
+ RD_REG_DWORD(®24->hccr); /* PCI Posting. */
+
+ d2 = (uint32_t) RD_REG_WORD(®24->mailbox0);
+ for (cnt = 6000000 ; cnt && d2; cnt--) {
+ udelay(5);
+ d2 = (uint32_t) RD_REG_WORD(®24->mailbox0);
+ barrier();
+ }
+
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+
+ ha->fw_transfer_size = REQUEST_ENTRY_SIZE * 1024;
+
+ rval = qla2x00_mbx_reg_test(ha);
+ if (rval) {
+ DEBUG(printk("scsi(%ld): Failed mailbox send register "
+ "test\n", ha->host_no));
+ qla_printk(KERN_WARNING, ha,
+ "Failed mailbox send register test\n");
+ }
+ else {
+ /* Flag a successful rval */
+ rval = QLA_SUCCESS;
+ }
+
+ return rval;
+ }
+
/* Assume a failed state */
rval = QLA_FUNCTION_FAILED;
@@ -606,6 +782,24 @@ chip_diag_failed:
return (rval);
}
+static void
+qla2x00_alloc_fw_dump(scsi_qla_host_t *ha)
+{
+ if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha))
+ return;
+
+ ha->fw_dumped = 0;
+ ha->fw_dump24_len = sizeof(struct qla24xx_fw_dump);
+ ha->fw_dump24_len += (ha->fw_memory_size - 0x100000) * sizeof(uint32_t);
+ ha->fw_dump24 = vmalloc(ha->fw_dump24_len);
+ if (ha->fw_dump24)
+ qla_printk(KERN_INFO, ha, "Allocated (%d KB) for firmware "
+ "dump...\n", ha->fw_dump24_len / 1024);
+ else
+ qla_printk(KERN_WARNING, ha, "Unable to allocate (%d KB) for "
+ "firmware dump!!!\n", ha->fw_dump24_len / 1024);
+}
+
/**
* qla2x00_resize_request_q() - Resize request queue given available ISP memory.
* @ha: HA context
@@ -621,6 +815,9 @@ qla2x00_resize_request_q(scsi_qla_host_t
dma_addr_t request_dma;
request_t *request_ring;
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ qla2x00_alloc_fw_dump(ha);
+
/* Valid only on recent ISPs. */
if (IS_QLA2100(ha) || IS_QLA2200(ha))
return;
@@ -668,87 +865,22 @@ qla2x00_resize_request_q(scsi_qla_host_t
static int
qla2x00_setup_chip(scsi_qla_host_t *ha)
{
- int rval;
- uint16_t cnt;
- uint16_t *risc_code;
- unsigned long risc_address;
- unsigned long risc_code_size;
- int num;
- int i;
- uint16_t *req_ring;
- struct qla_fw_info *fw_iter;
-
- rval = QLA_SUCCESS;
+ int rval;
+ uint32_t srisc_address = 0;
/* Load firmware sequences */
- fw_iter = ha->brd_info->fw_info;
- while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
- risc_code = fw_iter->fwcode;
- risc_code_size = *fw_iter->fwlen;
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- risc_address = *fw_iter->fwstart;
- } else {
- /* Extended address */
- risc_address = *fw_iter->lfwstart;
- }
-
- num = 0;
- rval = 0;
- while (risc_code_size > 0 && !rval) {
- cnt = (uint16_t)(ha->fw_transfer_size >> 1);
- if (cnt > risc_code_size)
- cnt = risc_code_size;
-
- DEBUG7(printk("scsi(%ld): Loading risc segment@ "
- "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
- ha->host_no, risc_code, cnt, risc_address));
-
- req_ring = (uint16_t *)ha->request_ring;
- for (i = 0; i < cnt; i++)
- req_ring[i] = cpu_to_le16(risc_code[i]);
-
- if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
- rval = qla2x00_load_ram(ha,
- ha->request_dma, risc_address, cnt);
- } else {
- rval = qla2x00_load_ram_ext(ha,
- ha->request_dma, risc_address, cnt);
- }
- if (rval) {
- DEBUG(printk("scsi(%ld): [ERROR] Failed to "
- "load segment %d of firmware\n",
- ha->host_no, num));
- qla_printk(KERN_WARNING, ha,
- "[ERROR] Failed to load "
- "segment %d of firmware\n", num);
-
- qla2x00_dump_regs(ha);
- break;
- }
-
- risc_code += cnt;
- risc_address += cnt;
- risc_code_size -= cnt;
- num++;
- }
-
- /* Next firmware sequence */
- fw_iter++;
- }
-
- /* Verify checksum of loaded RISC code. */
- if (!rval) {
+ rval = qla2x00_load_risc(ha, &srisc_address);
+ if (rval == QLA_SUCCESS) {
DEBUG(printk("scsi(%ld): Verifying Checksum of loaded RISC "
"code.\n", ha->host_no));
- rval = qla2x00_verify_checksum(ha);
+ rval = qla2x00_verify_checksum(ha, srisc_address);
if (rval == QLA_SUCCESS) {
/* Start firmware execution. */
DEBUG(printk("scsi(%ld): Checksum OK, start "
"firmware.\n", ha->host_no));
- rval = qla2x00_execute_fw(ha);
+ rval = qla2x00_execute_fw(ha, srisc_address);
/* Retrieve firmware information. */
if (rval == QLA_SUCCESS && ha->fw_major_version == 0) {
qla2x00_get_fw_version(ha,
@@ -812,6 +944,8 @@ qla2x00_update_fw_options(scsi_qla_host_
if (IS_QLA2100(ha) || IS_QLA2200(ha))
return;
+ else if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ return qla24xx_update_fw_options(ha);
/* Serial Link options. */
DEBUG3(printk("scsi(%ld): Serial link options:\n",
@@ -909,23 +1043,53 @@ qla2x00_init_rings(scsi_qla_host_t *ha)
ha->rsp_ring_index = 0;
/* Setup ring parameters in initialization control block. */
- ha->init_cb->request_q_outpointer = __constant_cpu_to_le16(0);
- ha->init_cb->response_q_inpointer = __constant_cpu_to_le16(0);
- ha->init_cb->request_q_length = cpu_to_le16(ha->request_q_length);
- ha->init_cb->response_q_length = cpu_to_le16(ha->response_q_length);
- ha->init_cb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma));
- ha->init_cb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma));
- ha->init_cb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma));
- ha->init_cb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma));
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ struct init_cb_24xx *icb24;
+
+ icb24 = (struct init_cb_24xx *)ha->init_cb;
+ icb24->request_q_outpointer = __constant_cpu_to_le16(0);
+ icb24->response_q_inpointer = __constant_cpu_to_le16(0);
+ icb24->request_q_length = cpu_to_le16(ha->request_q_length);
+ icb24->response_q_length = cpu_to_le16(ha->response_q_length);
+ icb24->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma));
+ icb24->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma));
+ icb24->response_q_address[0] =
+ cpu_to_le32(LSD(ha->response_dma));
+ icb24->response_q_address[1] =
+ cpu_to_le32(MSD(ha->response_dma));
+ } else {
+ init_cb_t *icb;
+
+ icb = ha->init_cb;
+ icb->request_q_outpointer = __constant_cpu_to_le16(0);
+ icb->response_q_inpointer = __constant_cpu_to_le16(0);
+ icb->request_q_length = cpu_to_le16(ha->request_q_length);
+ icb->response_q_length = cpu_to_le16(ha->response_q_length);
+ icb->request_q_address[0] = cpu_to_le32(LSD(ha->request_dma));
+ icb->request_q_address[1] = cpu_to_le32(MSD(ha->request_dma));
+ icb->response_q_address[0] = cpu_to_le32(LSD(ha->response_dma));
+ icb->response_q_address[1] = cpu_to_le32(MSD(ha->response_dma));
+ }
/* Initialize response queue entries */
qla2x00_init_response_q_entries(ha);
- WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0);
- WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0);
- WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0);
- WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0);
- RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg)); /* PCI Posting. */
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ struct device_reg_24xx __iomem *reg24 =
+ (struct device_reg_24xx __iomem *) ha->iobase;
+
+ WRT_REG_DWORD(®24->req_q_in, 0);
+ WRT_REG_DWORD(®24->req_q_out, 0);
+ WRT_REG_DWORD(®24->rsp_q_in, 0);
+ WRT_REG_DWORD(®24->rsp_q_out, 0);
+ RD_REG_DWORD(®24->rsp_q_out);
+ } else {
+ WRT_REG_WORD(ISP_REQ_Q_IN(ha, reg), 0);
+ WRT_REG_WORD(ISP_REQ_Q_OUT(ha, reg), 0);
+ WRT_REG_WORD(ISP_RSP_Q_IN(ha, reg), 0);
+ WRT_REG_WORD(ISP_RSP_Q_OUT(ha, reg), 0);
+ RD_REG_WORD(ISP_RSP_Q_OUT(ha, reg));
+ }
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -933,7 +1097,7 @@ qla2x00_init_rings(scsi_qla_host_t *ha)
qla2x00_update_fw_options(ha);
DEBUG(printk("scsi(%ld): Issue init firmware.\n", ha->host_no));
- rval = qla2x00_init_firmware(ha, sizeof(init_cb_t));
+ rval = qla2x00_init_firmware(ha, ha->init_cb_size);
if (rval) {
DEBUG2_3(printk("scsi(%ld): Init firmware **** FAILED ****.\n",
ha->host_no));
@@ -1168,38 +1332,36 @@ qla2x00_configure_hba(scsi_qla_host_t *h
static int
qla2x00_nvram_config(scsi_qla_host_t *ha)
{
- int rval;
- uint8_t chksum = 0;
- uint16_t cnt;
- uint8_t *dptr1, *dptr2;
- init_cb_t *icb = ha->init_cb;
- nvram_t *nv = (nvram_t *)ha->request_ring;
- uint16_t *wptr = (uint16_t *)ha->request_ring;
+ int rval;
+ uint8_t chksum = 0;
+ uint16_t cnt;
+ uint8_t *dptr1, *dptr2;
+ init_cb_t *icb = ha->init_cb;
+ nvram_t *nv = (nvram_t *)ha->request_ring;
+ uint8_t *ptr = (uint8_t *)ha->request_ring;
device_reg_t __iomem *reg = ha->iobase;
- uint8_t timer_mode;
+ uint8_t timer_mode;
+
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ return qla24xx_nvram_config(ha);
rval = QLA_SUCCESS;
/* Determine NVRAM starting address. */
+ ha->nvram_size = sizeof(nvram_t);
ha->nvram_base = 0;
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) && !IS_QLA2300(ha))
if ((RD_REG_WORD(®->ctrl_status) >> 14) == 1)
ha->nvram_base = 0x80;
/* Get NVRAM data and calculate checksum. */
- qla2x00_lock_nvram_access(ha);
- for (cnt = 0; cnt < sizeof(nvram_t)/2; cnt++) {
- *wptr = cpu_to_le16(qla2x00_get_nvram_word(ha,
- (cnt+ha->nvram_base)));
- chksum += (uint8_t)*wptr;
- chksum += (uint8_t)(*wptr >> 8);
- wptr++;
- }
- qla2x00_unlock_nvram_access(ha);
+ qla2x00_read_nvram_data(ha, ptr, ha->nvram_base, ha->nvram_size);
+ for (cnt = 0, chksum = 0; cnt < ha->nvram_size; cnt++)
+ chksum += *ptr++;
DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
- sizeof(nvram_t)));
+ ha->nvram_size));
/* Bad NVRAM data, set defaults parameters. */
if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' ||
@@ -1214,7 +1376,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha
/*
* Set default initialization control block.
*/
- memset(nv, 0, sizeof(nvram_t));
+ memset(nv, 0, ha->nvram_size);
nv->parameter_block_version = ICB_VERSION;
if (IS_QLA23XX(ha)) {
@@ -1274,7 +1436,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha
#endif
/* Reset Initialization control block */
- memset(icb, 0, sizeof(init_cb_t));
+ memset(icb, 0, ha->init_cb_size);
/*
* Setup driver NVRAM options.
@@ -1287,6 +1449,7 @@ qla2x00_nvram_config(scsi_qla_host_t *ha
if (IS_QLA23XX(ha)) {
nv->firmware_options[0] |= BIT_2;
nv->firmware_options[0] &= ~BIT_3;
+ nv->add_firmware_options[1] |= BIT_5 | BIT_4;
if (IS_QLA2300(ha)) {
if (ha->fb_rev == FPM_2310) {
@@ -1387,7 +1550,8 @@ qla2x00_nvram_config(scsi_qla_host_t *ha
ha->serial0 = icb->port_name[5];
ha->serial1 = icb->port_name[6];
ha->serial2 = icb->port_name[7];
- memcpy(ha->node_name, icb->node_name, WWN_SIZE);
+ ha->node_name = icb->node_name;
+ ha->port_name = icb->port_name;
icb->execution_throttle = __constant_cpu_to_le16(0xFFFF);
@@ -1702,12 +1866,16 @@ qla2x00_configure_local_loop(scsi_qla_ho
loop_id = (uint16_t)
((struct gid_list_info *)id_iter)->loop_id_2100;
id_iter += 4;
- } else {
+ } else if (IS_QLA23XX(ha)) {
loop_id = le16_to_cpu(
((struct gid_list_info *)id_iter)->loop_id);
id_iter += 6;
+ } else /* if (IS_QLA24XX(ha)) */ {
+ loop_id = le16_to_cpu(
+ ((struct gid_list_info *)id_iter)->loop_id);
+ id_iter += 8;
}
-
+
/* Bypass reserved domain fields. */
if ((domain & 0xf0) == 0xf0)
continue;
@@ -1917,10 +2085,15 @@ qla2x00_configure_fabric(scsi_qla_host_t
fc_port_t *fcport, *fcptemp;
uint16_t next_loopid;
uint16_t mb[MAILBOX_REGISTER_COUNT];
+ uint16_t loop_id;
LIST_HEAD(new_fcports);
/* If FL port exists, then SNS is present */
- rval = qla2x00_get_port_name(ha, SNS_FL_PORT, NULL, 0);
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ loop_id = NPH_F_PORT;
+ else
+ loop_id = SNS_FL_PORT;
+ rval = qla2x00_get_port_name(ha, loop_id, NULL, 0);
if (rval != QLA_SUCCESS) {
DEBUG2(printk("scsi(%ld): MBC_GET_PORT_NAME Failed, No FL "
"Port\n", ha->host_no));
@@ -1937,12 +2110,16 @@ qla2x00_configure_fabric(scsi_qla_host_t
}
do {
/* Ensure we are logged into the SNS. */
- qla2x00_login_fabric(ha, SIMPLE_NAME_SERVER, 0xff, 0xff, 0xfc,
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha))
+ loop_id = NPH_SNS;
+ else
+ loop_id = SIMPLE_NAME_SERVER;
+ qla2x00_login_fabric(ha, loop_id, 0xff, 0xff, 0xfc,
mb, BIT_1 | BIT_0);
if (mb[0] != MBS_COMMAND_COMPLETE) {
DEBUG2(qla_printk(KERN_INFO, ha,
"Failed SNS login: loop_id=%x mb[0]=%x mb[1]=%x "
- "mb[2]=%x mb[6]=%x mb[7]=%x\n", SIMPLE_NAME_SERVER,
+ "mb[2]=%x mb[6]=%x mb[7]=%x\n", loop_id,
mb[0], mb[1], mb[2], mb[6], mb[7]));
return (QLA_SUCCESS);
}
@@ -1993,7 +2170,10 @@ qla2x00_configure_fabric(scsi_qla_host_t
fcport->port_type != FCT_BROADCAST) {
qla2x00_fabric_logout(ha,
- fcport->loop_id);
+ fcport->loop_id,
+ fcport->d_id.b.domain,
+ fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
fcport->loop_id = FC_NO_LOOP_ID;
}
}
@@ -2023,7 +2203,6 @@ qla2x00_configure_fabric(scsi_qla_host_t
break;
}
}
-
/* Login and update database */
qla2x00_fabric_dev_login(ha, fcport, &next_loopid);
}
@@ -2137,7 +2316,6 @@ qla2x00_find_all_fabric_devs(scsi_qla_ho
/* Starting free loop ID. */
loop_id = ha->min_external_loopid;
-
for (; loop_id <= ha->last_loop_id; loop_id++) {
if (qla2x00_is_reserved_id(ha, loop_id))
continue;
@@ -2238,7 +2416,9 @@ qla2x00_find_all_fabric_devs(scsi_qla_ho
(fcport->flags & FCF_TAPE_PRESENT) == 0 &&
fcport->port_type != FCT_INITIATOR &&
fcport->port_type != FCT_BROADCAST) {
- qla2x00_fabric_logout(ha, fcport->loop_id);
+ qla2x00_fabric_logout(ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
fcport->loop_id = FC_NO_LOOP_ID;
}
@@ -2421,6 +2601,7 @@ qla2x00_device_resync(scsi_qla_host_t *h
case 0:
if (!IS_QLA2100(ha) && !IS_QLA2200(ha) &&
!IS_QLA6312(ha) && !IS_QLA6322(ha) &&
+ !IS_QLA24XX(ha) && !IS_QLA25XX(ha) &&
ha->flags.init_done) {
/* Handle port RSCN via asyncronous IOCBs */
rval2 = qla2x00_handle_port_rscn(ha, rscn_entry,
@@ -2489,15 +2670,23 @@ qla2x00_fabric_dev_login(scsi_qla_host_t
{
int rval;
int retry;
+ uint8_t opts;
rval = QLA_SUCCESS;
retry = 0;
rval = qla2x00_fabric_login(ha, fcport, next_loopid);
if (rval == QLA_SUCCESS) {
- rval = qla2x00_get_port_database(ha, fcport, 0);
+ /* Send an ADISC to tape devices.*/
+ opts = 0;
+ if (fcport->flags & FCF_TAPE_PRESENT)
+ opts |= BIT_1;
+ rval = qla2x00_get_port_database(ha, fcport, opts);
if (rval != QLA_SUCCESS) {
- qla2x00_fabric_logout(ha, fcport->loop_id);
+ qla2x00_fabric_logout(ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
+ qla2x00_mark_device_lost(ha, fcport, 1);
} else {
qla2x00_update_fcport(ha, fcport);
}
@@ -2545,10 +2734,10 @@ qla2x00_fabric_login(scsi_qla_host_t *ha
if (mb[0] == MBS_PORT_ID_USED) {
/*
* Device has another loop ID. The firmware team
- * recommends us to perform an implicit login with the
- * specified ID again. The ID we just used is save here
- * so we return with an ID that can be tried by the
- * next login.
+ * recommends the driver perform an implicit login with
+ * the specified ID again. The ID we just used is save
+ * here so we return with an ID that can be tried by
+ * the next login.
*/
retry++;
tmp_loopid = fcport->loop_id;
@@ -2602,7 +2791,9 @@ qla2x00_fabric_login(scsi_qla_host_t *ha
* dead.
*/
*next_loopid = fcport->loop_id;
- qla2x00_fabric_logout(ha, fcport->loop_id);
+ qla2x00_fabric_logout(ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
qla2x00_mark_device_lost(ha, fcport, 1);
rval = 1;
@@ -2618,7 +2809,9 @@ qla2x00_fabric_login(scsi_qla_host_t *ha
fcport->d_id.b.al_pa, fcport->loop_id, jiffies));
*next_loopid = fcport->loop_id;
- qla2x00_fabric_logout(ha, fcport->loop_id);
+ qla2x00_fabric_logout(ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
fcport->loop_id = FC_NO_LOOP_ID;
atomic_set(&fcport->state, FCS_DEVICE_DEAD);
@@ -2688,14 +2881,11 @@ qla2x00_loop_resync(scsi_qla_host_t *ha)
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
do {
- /* v2.19.05b6 */
atomic_set(&ha->loop_state, LOOP_UPDATE);
- /*
- * Issue marker command only when we are going
- * to start the I/O .
- */
- ha->marker_needed = 1;
+ /* Issue a marker after FW becomes ready. */
+ qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
+ ha->marker_needed = 0;
/* Remap devices on Loop. */
clear_bit(LOOP_RESYNC_NEEDED, &ha->dpc_flags);
@@ -2828,7 +3018,7 @@ qla2x00_abort_isp(scsi_qla_host_t *ha)
} else { /* schedule another ISP abort */
ha->isp_abort_cnt--;
DEBUG(printk("qla%ld: ISP abort - "
- "retry remainning %d\n",
+ "retry remaining %d\n",
ha->host_no, ha->isp_abort_cnt);)
status = 1;
}
@@ -2887,9 +3077,15 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
spin_lock_irqsave(&ha->hardware_lock, flags);
- /* Disable SRAM, Instruction RAM and GP RAM parity. */
- WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x0));
- RD_REG_WORD(®->hccr); /* PCI Posting. */
+ if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha)) {
+ /*
+ * Disable SRAM, Instruction RAM and GP RAM
+ * parity.
+ */
+ WRT_REG_WORD(®->hccr,
+ (HCCR_ENABLE_PARITY + 0x0));
+ RD_REG_WORD(®->hccr);
+ }
spin_unlock_irqrestore(&ha->hardware_lock, flags);
@@ -2897,16 +3093,21 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
spin_lock_irqsave(&ha->hardware_lock, flags);
- /* Enable proper parity */
- if (IS_QLA2300(ha))
- /* SRAM parity */
- WRT_REG_WORD(®->hccr,
- (HCCR_ENABLE_PARITY + 0x1));
- else
- /* SRAM, Instruction RAM and GP RAM parity */
- WRT_REG_WORD(®->hccr,
- (HCCR_ENABLE_PARITY + 0x7));
- RD_REG_WORD(®->hccr); /* PCI Posting. */
+ if (!IS_QLA24XX(ha) && !IS_QLA25XX(ha)) {
+ /* Enable proper parity */
+ if (IS_QLA2300(ha))
+ /* SRAM parity */
+ WRT_REG_WORD(®->hccr,
+ (HCCR_ENABLE_PARITY + 0x1));
+ else
+ /*
+ * SRAM, Instruction RAM and GP RAM
+ * parity.
+ */
+ WRT_REG_WORD(®->hccr,
+ (HCCR_ENABLE_PARITY + 0x7));
+ RD_REG_WORD(®->hccr);
+ }
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
@@ -2917,9 +3118,11 @@ qla2x00_restart_isp(scsi_qla_host_t *ha)
clear_bit(RESET_MARKER_NEEDED, &ha->dpc_flags);
if (!(status = qla2x00_fw_ready(ha))) {
DEBUG(printk("%s(): Start configure loop, "
- "status = %d\n",
- __func__,
- status);)
+ "status = %d\n", __func__, status);)
+
+ /* Issue a marker after FW becomes ready. */
+ qla2x00_marker(ha, 0, 0, MK_SYNC_ALL);
+
ha->flags.online = 1;
/* Wait at most MAX_TARGET RSCNs for a stable link. */
wait_time = 256;
@@ -2960,11 +3163,537 @@ qla2x00_reset_adapter(scsi_qla_host_t *h
ha->flags.online = 0;
qla2x00_disable_intrs(ha);
- /* Reset RISC processor. */
spin_lock_irqsave(&ha->hardware_lock, flags);
- WRT_REG_WORD(®->hccr, HCCR_RESET_RISC);
- RD_REG_WORD(®->hccr); /* PCI Posting. */
- WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC);
- RD_REG_WORD(®->hccr); /* PCI Posting. */
+ /* Reset RISC processor. */
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ struct device_reg_24xx __iomem *reg24 =
+ (struct device_reg_24xx __iomem *)ha->iobase;
+ WRT_REG_DWORD(®24->hccr, HCCRX_SET_RISC_RESET);
+ RD_REG_DWORD(®24->hccr); /* PCI Posting. */
+ WRT_REG_DWORD(®24->hccr, HCCRX_REL_RISC_PAUSE);
+ RD_REG_DWORD(®24->hccr); /* PCI Posting. */
+ } else {
+ WRT_REG_WORD(®->hccr, HCCR_RESET_RISC);
+ RD_REG_WORD(®->hccr); /* PCI Posting. */
+ WRT_REG_WORD(®->hccr, HCCR_RELEASE_RISC);
+ RD_REG_WORD(®->hccr); /* PCI Posting. */
+ }
spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
+
+static int
+qla24xx_nvram_config(scsi_qla_host_t *ha)
+{
+ int rval;
+ struct init_cb_24xx *icb;
+ struct nvram_24xx *nv;
+ uint32_t *dptr;
+ uint8_t *dptr1, *dptr2;
+ struct device_reg_24xx __iomem *reg;
+ uint32_t chksum;
+ uint16_t cnt;
+
+ rval = QLA_SUCCESS;
+ icb = (struct init_cb_24xx *)ha->init_cb;
+ reg = (struct device_reg_24xx __iomem *)ha->iobase;
+ nv = (struct nvram_24xx *)ha->request_ring;
+
+ /* Determine NVRAM starting address. */
+ ha->nvram_size = sizeof(struct nvram_24xx);
+ ha->nvram_base = FA_NVRAM_FUNC0_ADDR;
+ if (PCI_FUNC(ha->pdev->devfn))
+ ha->nvram_base = FA_NVRAM_FUNC1_ADDR;
+
+ /* Get NVRAM data and calculate checksum. */
+ dptr = (uint32_t *)nv;
+ qla2x00_read_nvram_data(ha, (uint8_t *)dptr, ha->nvram_base,
+ ha->nvram_size);
+ for (cnt = 0, chksum = 0; cnt < ha->nvram_size >> 2; cnt++)
+ chksum += le32_to_cpu(*dptr++);
+
+ DEBUG5(printk("scsi(%ld): Contents of NVRAM\n", ha->host_no));
+ DEBUG5(qla2x00_dump_buffer((uint8_t *)ha->request_ring,
+ ha->nvram_size));
+
+ /* Bad NVRAM data, set defaults parameters. */
+ if (chksum || nv->id[0] != 'I' || nv->id[1] != 'S' || nv->id[2] != 'P'
+ || nv->id[3] != ' ' ||
+ nv->nvram_version < __constant_cpu_to_le16(ICB_VERSION)) {
+ /* Reset NVRAM data. */
+ qla_printk(KERN_WARNING, ha, "Inconsistent NVRAM detected: "
+ "checksum=0x%x id=%c version=0x%x.\n", chksum, nv->id[0],
+ le16_to_cpu(nv->nvram_version));
+ qla_printk(KERN_WARNING, ha, "Falling back to functioning (yet "
+ "invalid -- WWPN) defaults.\n");
+
+ /*
+ * Set default initialization control block.
+ */
+ memset(nv, 0, ha->nvram_size);
+ nv->nvram_version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->version = __constant_cpu_to_le16(ICB_VERSION);
+ nv->frame_payload_size = __constant_cpu_to_le16(2048);
+ nv->execution_throttle = __constant_cpu_to_le16(0xFFFF);
+ nv->exchange_count = __constant_cpu_to_le16(0);
+ nv->hard_address = __constant_cpu_to_le16(124);
+ nv->port_name[0] = 0x21;
+ nv->port_name[1] = 0x00 + PCI_FUNC(ha->pdev->devfn);
+ nv->port_name[2] = 0x00;
+ nv->port_name[3] = 0xe0;
+ nv->port_name[4] = 0x8b;
+ nv->port_name[5] = 0x1c;
+ nv->port_name[6] = 0x55;
+ nv->port_name[7] = 0x86;
+ nv->node_name[0] = 0x20;
+ nv->node_name[1] = 0x00;
+ nv->node_name[2] = 0x00;
+ nv->node_name[3] = 0xe0;
+ nv->node_name[4] = 0x8b;
+ nv->node_name[5] = 0x1c;
+ nv->node_name[6] = 0x55;
+ nv->node_name[7] = 0x86;
+ nv->login_retry_count = __constant_cpu_to_le16(8);
+ nv->link_down_timeout = __constant_cpu_to_le16(200);
+ nv->interrupt_delay_timer = __constant_cpu_to_le16(0);
+ nv->login_timeout = __constant_cpu_to_le16(0);
+ nv->firmware_options_1 =
+ __constant_cpu_to_le32(BIT_14|BIT_13|BIT_2|BIT_1);
+ nv->firmware_options_2 = __constant_cpu_to_le32(2 << 4);
+ nv->firmware_options_2 |= __constant_cpu_to_le32(BIT_12);
+ nv->firmware_options_3 = __constant_cpu_to_le32(2 << 13);
+ nv->host_p = __constant_cpu_to_le32(BIT_11|BIT_10);
+ nv->efi_parameters = __constant_cpu_to_le32(0);
+ nv->reset_delay = 5;
+ nv->max_luns_per_target = __constant_cpu_to_le16(128);
+ nv->port_down_retry_count = __constant_cpu_to_le16(30);
+ nv->link_down_timeout = __constant_cpu_to_le16(30);
+
+ rval = 1;
+ }
+
+ /* Reset Initialization control block */
+ memset(icb, 0, sizeof(struct init_cb_24xx));
+
+ /* Copy 1st segment. */
+ dptr1 = (uint8_t *)icb;
+ dptr2 = (uint8_t *)&nv->version;
+ cnt = (uint8_t *)&icb->response_q_inpointer - (uint8_t *)&icb->version;
+ while (cnt--)
+ *dptr1++ = *dptr2++;
+
+ icb->login_retry_count = nv->login_retry_count;
+ icb->link_down_timeout = nv->link_down_timeout;
+
+ /* Copy 2nd segment. */
+ dptr1 = (uint8_t *)&icb->interrupt_delay_timer;
+ dptr2 = (uint8_t *)&nv->interrupt_delay_timer;
+ cnt = (uint8_t *)&icb->reserved_3 -
+ (uint8_t *)&icb->interrupt_delay_timer;
+ while (cnt--)
+ *dptr1++ = *dptr2++;
+
+ /*
+ * Setup driver NVRAM options.
+ */
+ if (memcmp(nv->model_name, BINZERO, sizeof(nv->model_name)) != 0) {
+ char *st, *en;
+ uint16_t index;
+
+ strncpy(ha->model_number, nv->model_name,
+ sizeof(nv->model_name));
+ st = en = ha->model_number;
+ en += sizeof(nv->model_name) - 1;
+ while (en > st) {
+ if (*en != 0x20 && *en != 0x00)
+ break;
+ *en-- = '\0';
+ }
+
+ index = (ha->pdev->subsystem_device & 0xff);
+ if (index < QLA_MODEL_NAMES)
+ ha->model_desc = qla2x00_model_desc[index];
+ } else
+ strcpy(ha->model_number, "QLA2462");
+
+ /* Prepare nodename */
+ if ((icb->firmware_options_1 & BIT_14) == 0) {
+ /*
+ * Firmware will apply the following mask if the nodename was
+ * not provided.
+ */
+ memcpy(icb->node_name, icb->port_name, WWN_SIZE);
+ icb->node_name[0] &= 0xF0;
+ }
+
+ /* Set host adapter parameters. */
+ ha->flags.disable_risc_code_load = 0;
+ ha->flags.enable_lip_reset = 1;
+ ha->flags.enable_lip_full_login = 1;
+ ha->flags.enable_target_reset = 1;
+ ha->flags.enable_led_scheme = 0;
+
+ ha->operating_mode =
+ (icb->firmware_options_2 & (BIT_6 | BIT_5 | BIT_4)) >> 4;
+
+ memcpy(ha->fw_seriallink_options24, nv->seriallink_options,
+ sizeof(ha->fw_seriallink_options24));
+
+ /* save HBA serial number */
+ ha->serial0 = icb->port_name[5];
+ ha->serial1 = icb->port_name[6];
+ ha->serial2 = icb->port_name[7];
+ ha->node_name = icb->node_name;
+ ha->port_name = icb->port_name;
+
+ ha->retry_count = le16_to_cpu(nv->login_retry_count);
+
+ /* Set minimum login_timeout to 4 seconds. */
+ if (le16_to_cpu(nv->login_timeout) < ql2xlogintimeout)
+ nv->login_timeout = cpu_to_le16(ql2xlogintimeout);
+ if (le16_to_cpu(nv->login_timeout) < 4)
+ nv->login_timeout = __constant_cpu_to_le16(4);
+ ha->login_timeout = le16_to_cpu(nv->login_timeout);
+ icb->login_timeout = cpu_to_le16(nv->login_timeout);
+
+ /* Set minimum RATOV to 200 tenths of a second. */
+ ha->r_a_tov = 200;
+
+ ha->loop_reset_delay = nv->reset_delay;
+
+ /* Link Down Timeout = 0:
+ *
+ * When Port Down timer expires we will start returning
+ * I/O's to OS with "DID_NO_CONNECT".
+ *
+ * Link Down Timeout != 0:
+ *
+ * The driver waits for the link to come up after link down
+ * before returning I/Os to OS with "DID_NO_CONNECT".
+ */
+ if (le16_to_cpu(nv->link_down_timeout) == 0) {
+ ha->loop_down_abort_time =
+ (LOOP_DOWN_TIME - LOOP_DOWN_TIMEOUT);
+ } else {
+ ha->link_down_timeout = le16_to_cpu(nv->link_down_timeout);
+ ha->loop_down_abort_time =
+ (LOOP_DOWN_TIME - ha->link_down_timeout);
+ }
+
+ /* Need enough time to try and get the port back. */
+ ha->port_down_retry_count = le16_to_cpu(nv->port_down_retry_count);
+ if (qlport_down_retry)
+ ha->port_down_retry_count = qlport_down_retry;
+
+ /* Set login_retry_count */
+ ha->login_retry_count = le16_to_cpu(nv->login_retry_count);
+ if (ha->port_down_retry_count ==
+ le16_to_cpu(nv->port_down_retry_count) &&
+ ha->port_down_retry_count > 3)
+ ha->login_retry_count = ha->port_down_retry_count;
+ else if (ha->port_down_retry_count > (int)ha->login_retry_count)
+ ha->login_retry_count = ha->port_down_retry_count;
+ if (ql2xloginretrycount)
+ ha->login_retry_count = ql2xloginretrycount;
+
+ if (rval) {
+ DEBUG2_3(printk(KERN_WARNING
+ "scsi(%ld): NVRAM configuration failed!\n", ha->host_no));
+ }
+ return (rval);
+}
+
+static int
+qla2x00_load_risc(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ uint16_t cnt;
+ uint16_t *risc_code;
+ unsigned long risc_address;
+ unsigned long risc_code_size;
+ int num;
+ int i;
+ uint16_t *req_ring;
+ struct qla_fw_info *fw_iter;
+
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ if (ql2xfwloadbin)
+ return qla24xx_load_risc_hotplug(ha, srisc_addr);
+ else
+ return qla24xx_load_risc_flash(ha, srisc_addr);
+ }
+
+ rval = QLA_SUCCESS;
+
+ /* Load firmware sequences */
+ fw_iter = ha->brd_info->fw_info;
+ *srisc_addr = *ha->brd_info->fw_info->fwstart;
+ while (fw_iter->addressing != FW_INFO_ADDR_NOMORE) {
+ risc_code = fw_iter->fwcode;
+ risc_code_size = *fw_iter->fwlen;
+
+ if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
+ risc_address = *fw_iter->fwstart;
+ } else {
+ /* Extended address */
+ risc_address = *fw_iter->lfwstart;
+ }
+
+ num = 0;
+ rval = 0;
+ while (risc_code_size > 0 && !rval) {
+ cnt = (uint16_t)(ha->fw_transfer_size >> 1);
+ if (cnt > risc_code_size)
+ cnt = risc_code_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ "
+ "addr %p, number of bytes 0x%x, offset 0x%lx.\n",
+ ha->host_no, risc_code, cnt, risc_address));
+
+ req_ring = (uint16_t *)ha->request_ring;
+ for (i = 0; i < cnt; i++)
+ req_ring[i] = cpu_to_le16(risc_code[i]);
+
+ if (fw_iter->addressing == FW_INFO_ADDR_NORMAL) {
+ rval = qla2x00_load_ram(ha, ha->request_dma,
+ risc_address, cnt);
+ } else {
+ rval = qla2x00_load_ram_ext(ha,
+ ha->request_dma, risc_address, cnt);
+ }
+ if (rval) {
+ DEBUG(printk("scsi(%ld): [ERROR] Failed to "
+ "load segment %d of firmware\n",
+ ha->host_no, num));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", num);
+
+ qla2x00_dump_regs(ha);
+ break;
+ }
+
+ risc_code += cnt;
+ risc_address += cnt;
+ risc_code_size -= cnt;
+ num++;
+ }
+
+ /* Next firmware sequence */
+ fw_iter++;
+ }
+
+ return (rval);
+}
+
+/* NOTE: ISP24XX
+ *
+ * Firmware image is written to flash via the .bin file which is in big-endian
+ * format.
+ */
+
+static int
+qla24xx_load_risc_flash(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int segments, fragment;
+ uint32_t faddr;
+ uint32_t *dcode, dlen;
+ uint32_t risc_addr;
+ uint32_t risc_size;
+ uint32_t i;
+
+ rval = QLA_SUCCESS;
+
+ segments = FA_RISC_CODE_SEGMENTS;
+ faddr = FA_RISC_CODE_ADDR;
+ dcode = (uint32_t *)ha->request_ring;
+ *srisc_addr = 0;
+
+ /* Validate firmware image by checking version. */
+ qla24xx_read_flash_data(ha, dcode, faddr + 4, 4);
+ for (i = 0; i < 4; i++)
+ dcode[i] = be32_to_cpu(dcode[i]);
+ if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
+ dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
+ (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
+ dcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of flash firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
+ dcode[1], dcode[2], dcode[3]);
+
+ return QLA_FUNCTION_FAILED;
+ }
+
+ while (segments && rval == QLA_SUCCESS) {
+ /* Read segment's load information. */
+ qla24xx_read_flash_data(ha, dcode, faddr, 4);
+
+ risc_addr = be32_to_cpu(dcode[2]);
+ *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
+ risc_size = be32_to_cpu(dcode[3]);
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ dlen = (uint32_t)(ha->fw_transfer_size >> 2);
+ if (dlen > risc_size)
+ dlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of dwords 0x%x, offset 0x%x.\n",
+ ha->host_no, risc_addr, dlen, faddr));
+
+ qla24xx_read_flash_data(ha, dcode, faddr, dlen);
+ for (i = 0; i < dlen; i++)
+ dcode[i] = swab32(dcode[i]);
+
+ rval = qla2x00_load_ram_ext(ha, ha->request_dma,
+ risc_addr, dlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ faddr += dlen;
+ risc_addr += dlen;
+ risc_size -= dlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ segments--;
+ }
+
+ return rval;
+}
+
+static int
+qla24xx_load_risc_hotplug(scsi_qla_host_t *ha, uint32_t *srisc_addr)
+{
+ int rval;
+ int segments, fragment;
+ uint32_t *dcode, dlen;
+ uint32_t risc_addr;
+ uint32_t risc_size;
+ uint32_t i;
+ const struct firmware *fw_entry;
+ uint32_t *fwcode, fwclen;
+
+ if (request_firmware(&fw_entry, ha->brd_info->fw_fname,
+ &ha->pdev->dev)) {
+ qla_printk(KERN_ERR, ha,
+ "Firmware image file not available: '%s'\n",
+ ha->brd_info->fw_fname);
+ return QLA_FUNCTION_FAILED;
+ }
+
+ rval = QLA_SUCCESS;
+
+ segments = FA_RISC_CODE_SEGMENTS;
+ dcode = (uint32_t *)ha->request_ring;
+ *srisc_addr = 0;
+ fwcode = (uint32_t *)fw_entry->data;
+ fwclen = 0;
+
+ /* Validate firmware image by checking version. */
+ if (fw_entry->size < 8 * sizeof(uint32_t)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of flash firmware image "
+ "(%Zd)!\n", fw_entry->size);
+ goto fail_fw_integrity;
+ }
+ for (i = 0; i < 4; i++)
+ dcode[i] = be32_to_cpu(fwcode[i + 4]);
+ if ((dcode[0] == 0xffffffff && dcode[1] == 0xffffffff &&
+ dcode[2] == 0xffffffff && dcode[3] == 0xffffffff) ||
+ (dcode[0] == 0 && dcode[1] == 0 && dcode[2] == 0 &&
+ dcode[3] == 0)) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of flash firmware image!\n");
+ qla_printk(KERN_WARNING, ha,
+ "Firmware data: %08x %08x %08x %08x!\n", dcode[0],
+ dcode[1], dcode[2], dcode[3]);
+ goto fail_fw_integrity;
+ }
+
+ while (segments && rval == QLA_SUCCESS) {
+ risc_addr = be32_to_cpu(fwcode[2]);
+ *srisc_addr = *srisc_addr == 0 ? risc_addr : *srisc_addr;
+ risc_size = be32_to_cpu(fwcode[3]);
+
+ /* Validate firmware image size. */
+ fwclen += risc_size * sizeof(uint32_t);
+ if (fw_entry->size < fwclen) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to verify integrity of flash firmware image "
+ "(%Zd)!\n", fw_entry->size);
+ goto fail_fw_integrity;
+ }
+
+ fragment = 0;
+ while (risc_size > 0 && rval == QLA_SUCCESS) {
+ dlen = (uint32_t)(ha->fw_transfer_size >> 2);
+ if (dlen > risc_size)
+ dlen = risc_size;
+
+ DEBUG7(printk("scsi(%ld): Loading risc segment@ risc "
+ "addr %x, number of dwords 0x%x.\n", ha->host_no,
+ risc_addr, dlen));
+
+ for (i = 0; i < dlen; i++)
+ dcode[i] = swab32(fwcode[i]);
+
+ rval = qla2x00_load_ram_ext(ha, ha->request_dma,
+ risc_addr, dlen);
+ if (rval) {
+ DEBUG(printk("scsi(%ld):[ERROR] Failed to load "
+ "segment %d of firmware\n", ha->host_no,
+ fragment));
+ qla_printk(KERN_WARNING, ha,
+ "[ERROR] Failed to load segment %d of "
+ "firmware\n", fragment);
+ break;
+ }
+
+ fwcode += dlen;
+ risc_addr += dlen;
+ risc_size -= dlen;
+ fragment++;
+ }
+
+ /* Next segment. */
+ segments--;
+ }
+
+ release_firmware(fw_entry);
+ return rval;
+
+fail_fw_integrity:
+
+ release_firmware(fw_entry);
+ return QLA_FUNCTION_FAILED;
+
+}
+
+static void
+qla24xx_update_fw_options(scsi_qla_host_t *ha)
+{
+ int rval;
+
+ /* Update Serial Link options. */
+ if ((ha->fw_seriallink_options24[0] & BIT_0) == 0)
+ return;
+
+ rval = qla2x00_set_serdes_params(ha, ha->fw_seriallink_options24[1],
+ ha->fw_seriallink_options24[2], ha->fw_seriallink_options24[3]);
+ if (rval != QLA_SUCCESS) {
+ qla_printk(KERN_WARNING, ha,
+ "Unable to update Serial Link options (%x).\n", rval);
+ }
+}
diff --git a/drivers/scsi/qla2xxx/qla_inline.h b/drivers/scsi/qla2xxx/qla_inline.h
--- a/drivers/scsi/qla2xxx/qla_inline.h
+++ b/drivers/scsi/qla2xxx/qla_inline.h
@@ -288,6 +288,27 @@ qla2x00_delete_timer_from_cmd(srb_t *sp)
}
}
+static inline uint8_t *host_to_fcp_swap(uint8_t *, uint32_t);
+
+/**
+ * host_to_fcp_swap() -
+ * @fcp:
+ * @bsize:
+ *
+ * Returns
+ */
+static inline uint8_t *
+host_to_fcp_swap(uint8_t *fcp, uint32_t bsize)
+{
+ uint32_t *ifcp = (uint32_t *) fcp;
+ uint32_t *ofcp = (uint32_t *) fcp;
+ uint32_t iter = bsize >> 2;
+
+ for (; iter ; iter--)
+ *ofcp++ = swab32(*ifcp++);
+
+ return (fcp);
+}
static inline int qla2x00_is_reserved_id(scsi_qla_host_t *, uint16_t);
static inline int
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -83,6 +83,11 @@ static void qla2x00_free_device(scsi_qla
static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha);
+int ql2xfwloadbin;
+module_param(ql2xfwloadbin, int, S_IRUGO|S_IRUSR);
+MODULE_PARM_DESC(ql2xfwloadbin,
+ "");
+
/*
* SCSI host template entry points
*/
@@ -180,24 +185,61 @@ void qla2x00_sp_compl(scsi_qla_host_t *h
static char *
qla2x00_get_pci_info_str(struct scsi_qla_host *ha, char *str)
{
- static char *pci_bus_modes[] = {
- "33", "66", "100", "133",
- };
- uint16_t pci_bus;
+ static char *pci_bus_modes[] = { "33", "66", "100", "133", };
+ uint32_t pci_bus;
+ int pcie_reg;
+
+ pcie_reg = pci_find_capability(ha->pdev, PCI_CAP_ID_EXP);
+ if (pcie_reg) {
+ char lwstr[6];
+ uint16_t pcie_lstat, lspeed, lwidth;
+
+ pcie_reg += 0x12;
+ pci_read_config_word(ha->pdev, pcie_reg, &pcie_lstat);
+ lspeed = pcie_lstat & (BIT_0 | BIT_1 | BIT_2 | BIT_3);
+ lwidth = (pcie_lstat &
+ (BIT_4 | BIT_5 | BIT_6 | BIT_7 | BIT_8 | BIT_9)) >> 4;
+
+ strcpy(str, "PCIe (");
+ if (lspeed == 1)
+ strcat(str, "2.5Gb/s ");
+ else
+ strcat(str, "<unknown> ");
+ snprintf(lwstr, sizeof(lwstr), "x%d)", lwidth);
+ strcat(str, lwstr);
+
+ return str;
+ }
strcpy(str, "PCI");
- pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
- if (pci_bus) {
- strcat(str, "-X (");
- strcat(str, pci_bus_modes[pci_bus]);
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ pci_bus = (ha->pci_attr & CSRX_PCIX_BUS_MODE_MASK) >> 8;
+ if (pci_bus == 0 || pci_bus == 8) {
+ strcat(str, " (");
+ strcat(str, pci_bus_modes[pci_bus >> 3]);
+ } else {
+ strcat(str, "-X ");
+ if (pci_bus & BIT_2)
+ strcat(str, "Mode 2");
+ else
+ strcat(str, "Mode 1");
+ strcat(str, " (");
+ strcat(str, pci_bus_modes[pci_bus & ~BIT_2]);
+ }
} else {
- pci_bus = (ha->pci_attr & BIT_8) >> 8;
- strcat(str, " (");
- strcat(str, pci_bus_modes[pci_bus]);
+ pci_bus = (ha->pci_attr & (BIT_9 | BIT_10)) >> 9;
+ if (pci_bus) {
+ strcat(str, "-X (");
+ strcat(str, pci_bus_modes[pci_bus]);
+ } else {
+ pci_bus = (ha->pci_attr & BIT_8) >> 8;
+ strcat(str, " (");
+ strcat(str, pci_bus_modes[pci_bus]);
+ }
}
strcat(str, " MHz)");
- return (str);
+ return str;
}
char *
@@ -209,9 +251,21 @@ qla2x00_get_fw_version_str(struct scsi_q
ha->fw_minor_version,
ha->fw_subminor_version);
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ if (ha->fw_attributes & BIT_0)
+ strcat(str, "[Class 2] ");
+ if (ha->fw_attributes & BIT_1)
+ strcat(str, "[IP] ");
+ if (ha->fw_attributes & BIT_2)
+ strcat(str, "[Multi-ID] ");
+ if (ha->fw_attributes & BIT_13)
+ strcat(str, "[Experimental] ");
+ return str;
+ }
+
if (ha->fw_attributes & BIT_9) {
strcat(str, "FLX");
- return (str);
+ return str;
}
switch (ha->fw_attributes & 0xFF) {
@@ -235,7 +289,7 @@ qla2x00_get_fw_version_str(struct scsi_q
if (ha->fw_attributes & 0x100)
strcat(str, "X");
- return (str);
+ return str;
}
/**************************************************************************
@@ -294,7 +348,7 @@ qla2x00_queuecommand(struct scsi_cmnd *c
CMD_SP(cmd) = (void *)sp;
cmd->scsi_done = done;
- rval = qla2x00_start_scsi(sp);
+ rval = ha->start_scsi(sp);
if (rval != QLA_SUCCESS)
goto qc_host_busy_free_sp;
@@ -385,8 +439,8 @@ qla2x00_eh_wait_on_command(scsi_qla_host
static int
qla2x00_wait_for_hba_online(scsi_qla_host_t *ha)
{
- int return_status;
- unsigned long wait_online;
+ int return_status;
+ unsigned long wait_online;
wait_online = jiffies + (MAX_LOOP_TIMEOUT * HZ);
while (((test_bit(ISP_ABORT_NEEDED, &ha->dpc_flags)) ||
@@ -629,7 +683,9 @@ qla2xxx_eh_device_reset(struct scsi_cmnd
#if defined(LOGOUT_AFTER_DEVICE_RESET)
if (ret == SUCCESS) {
if (fcport->flags & FC_FABRIC_DEVICE) {
- qla2x00_fabric_logout(ha, fcport->loop_id);
+ qla2x00_fabric_logout(ha, fcport->loop_id,
+ fcport->d_id.b.domain, fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
qla2x00_mark_device_lost(ha, fcport);
}
}
@@ -1108,6 +1164,7 @@ int qla2x00_probe_one(struct pci_dev *pd
{
int ret = -ENODEV;
device_reg_t __iomem *reg;
+ struct device_reg_24xx __iomem *reg24;
struct Scsi_Host *host;
scsi_qla_host_t *ha;
unsigned long flags = 0;
@@ -1142,18 +1199,17 @@ int qla2x00_probe_one(struct pci_dev *pd
if (ret)
goto probe_failed;
- /* Sanitize the information from PCI BIOS. */
- host->irq = pdev->irq;
-
qla_printk(KERN_INFO, ha,
"Found an %s, irq %d, iobase 0x%p\n", ha->brd_info->isp_name,
- host->irq, ha->iobase);
+ pdev->irq, ha->iobase);
spin_lock_init(&ha->hardware_lock);
ha->prev_topology = 0;
ha->ports = MAX_BUSES;
+ ha->init_cb_size = sizeof(init_cb_t);
+ ha->start_scsi = qla2x00_start_scsi;
if (IS_QLA2100(ha)) {
host->max_id = MAX_TARGETS_2100;
ha->mbx_count = MAILBOX_REGISTER_COUNT_2100;
@@ -1167,12 +1223,20 @@ int qla2x00_probe_one(struct pci_dev *pd
ha->request_q_length = REQUEST_ENTRY_CNT_2200;
ha->response_q_length = RESPONSE_ENTRY_CNT_2100;
ha->last_loop_id = SNS_LAST_LOOP_ID_2100;
- } else /*if (IS_QLA2300(ha))*/ {
+ } else if (IS_QLA23XX(ha)) {
host->max_id = MAX_TARGETS_2200;
ha->mbx_count = MAILBOX_REGISTER_COUNT;
ha->request_q_length = REQUEST_ENTRY_CNT_2200;
ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
+ } else if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ host->max_id = MAX_TARGETS_2200;
+ ha->mbx_count = MAILBOX_REGISTER_COUNT;
+ ha->request_q_length = REQUEST_ENTRY_CNT_24XX;
+ ha->response_q_length = RESPONSE_ENTRY_CNT_2300;
+ ha->last_loop_id = SNS_LAST_LOOP_ID_2300;
+ ha->init_cb_size = sizeof(struct init_cb_24xx);
+ ha->start_scsi = qla24xx_start_scsi;
}
host->can_queue = ha->request_q_length + 128;
@@ -1243,18 +1307,23 @@ int qla2x00_probe_one(struct pci_dev *pd
host->max_lun = MAX_LUNS;
host->transportt = qla2xxx_transport_template;
+ /* Register ISR. */
if (IS_QLA2100(ha) || IS_QLA2200(ha))
- ret = request_irq(host->irq, qla2100_intr_handler,
+ ret = request_irq(pdev->irq, qla2100_intr_handler,
+ SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
+ else if (IS_QLA23XX(ha))
+ ret = request_irq(pdev->irq, qla2300_intr_handler,
SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
else
- ret = request_irq(host->irq, qla2300_intr_handler,
+ ret = request_irq(pdev->irq, qla24xx_intr_handler,
SA_INTERRUPT|SA_SHIRQ, ha->brd_info->drv_name, ha);
- if (ret) {
+ if (ret != 0) {
qla_printk(KERN_WARNING, ha,
"Failed to reserve interrupt %d already in use.\n",
- host->irq);
+ pdev->irq);
goto probe_failed;
}
+ host->irq = pdev->irq;
/* Initialized the timer */
qla2x00_start_timer(ha, qla2x00_timer, WATCH_INTERVAL);
@@ -1262,27 +1331,35 @@ int qla2x00_probe_one(struct pci_dev *pd
DEBUG2(printk("DEBUG: detect hba %ld at address = %p\n",
ha->host_no, ha));
- reg = ha->iobase;
-
/* Disable ISP interrupts. */
qla2x00_disable_intrs(ha);
- /* Ensure mailbox registers are free. */
- spin_lock_irqsave(&ha->hardware_lock, flags);
- WRT_REG_WORD(®->semaphore, 0);
- WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT);
- WRT_REG_WORD(®->hccr, HCCR_CLR_HOST_INT);
-
- /* Enable proper parity */
- if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
- if (IS_QLA2300(ha))
- /* SRAM parity */
- WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x1));
- else
- /* SRAM, Instruction RAM and GP RAM parity */
- WRT_REG_WORD(®->hccr, (HCCR_ENABLE_PARITY + 0x7));
+ if (IS_QLA24XX(ha) || IS_QLA25XX(ha)) {
+ reg24 = (struct device_reg_24xx __iomem *)ha->iobase;
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ WRT_REG_DWORD(®24->hccr, HCCRX_CLR_HOST_INT);
+ WRT_REG_DWORD(®24->hccr, HCCRX_CLR_RISC_INT);
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
+ } else {
+ reg = ha->iobase;
+ spin_lock_irqsave(&ha->hardware_lock, flags);
+ WRT_REG_WORD(®->semaphore, 0);
+ WRT_REG_WORD(®->hccr, HCCR_CLR_RISC_INT);
+ WRT_REG_WORD(®->hccr, HCCR_CLR_HOST_INT);
+
+ /* Enable proper parity */
+ if (!IS_QLA2100(ha) && !IS_QLA2200(ha)) {
+ if (IS_QLA2300(ha))
+ /* SRAM parity */
+ WRT_REG_WORD(®->hccr,
+ (HCCR_ENABLE_PARITY + 0x1));
+ else
+ /* SRAM, Instruction RAM and GP RAM parity */
+ WRT_REG_WORD(®->hccr,
+ (HCCR_ENABLE_PARITY + 0x7));
+ }
+ spin_unlock_irqrestore(&ha->hardware_lock, flags);
}
- spin_unlock_irqrestore(&ha->hardware_lock, flags);
/* Enable chip interrupts. */
qla2x00_enable_intrs(ha);
@@ -1321,7 +1398,7 @@ int qla2x00_probe_one(struct pci_dev *pd
" %s: %s @ %s hdma%c, host#=%ld, fw=%s\n", qla2x00_version_str,
ha->model_number, ha->model_desc ? ha->model_desc: "",
ha->brd_info->isp_name, qla2x00_get_pci_info_str(ha, pci_info),
- pci_name(ha->pdev), ha->flags.enable_64bit_addressing ? '+': '-',
+ pci_name(pdev), ha->flags.enable_64bit_addressing ? '+': '-',
ha->host_no, qla2x00_get_fw_version_str(ha, fw_str));
/* Go with fc_rport registration. */
@@ -1606,7 +1683,7 @@ qla2x00_mem_alloc(scsi_qla_host_t *ha)
continue;
}
- memset(ha->init_cb, 0, sizeof(init_cb_t));
+ memset(ha->init_cb, 0, ha->init_cb_size);
/* Get consistent memory allocated for Get Port Database cmd */
ha->iodesc_pd = dma_pool_alloc(ha->s_dma_pool, GFP_KERNEL,
@@ -1818,10 +1895,15 @@ qla2x00_mem_free(scsi_qla_host_t *ha)
if (ha->fw_dump)
free_pages((unsigned long)ha->fw_dump, ha->fw_dump_order);
+ if (ha->fw_dump24)
+ vfree(ha->fw_dump24);
+
if (ha->fw_dump_buffer)
vfree(ha->fw_dump_buffer);
ha->fw_dump = NULL;
+ ha->fw_dump24 = NULL;
+ ha->fw_dumped = 0;
ha->fw_dump_reading = 0;
ha->fw_dump_buffer = NULL;
}
@@ -1983,7 +2065,10 @@ qla2x00_do_dpc(void *data)
FCF_TAPE_PRESENT)
qla2x00_fabric_logout(
ha,
- fcport->loop_id);
+ fcport->loop_id,
+ fcport->d_id.b.domain,
+ fcport->d_id.b.area,
+ fcport->d_id.b.al_pa);
status = qla2x00_fabric_login(
ha, fcport, &next_loopid);
} else
@@ -2194,7 +2279,7 @@ qla2x00_timer(scsi_qla_host_t *ha)
atomic_set(&fcport->state, FCS_DEVICE_DEAD);
DEBUG(printk("scsi(%ld): fcport-%d - port retry count: "
- "%d remainning\n",
+ "%d remaining\n",
ha->host_no,
t, atomic_read(&fcport->port_down_timer)));
}
@@ -2257,7 +2342,7 @@ qla2x00_timer(scsi_qla_host_t *ha)
set_bit(ISP_ABORT_NEEDED, &ha->dpc_flags);
}
}
- DEBUG3(printk("scsi(%ld): Loop Down - seconds remainning %d\n",
+ DEBUG3(printk("scsi(%ld): Loop Down - seconds remaining %d\n",
ha->host_no,
atomic_read(&ha->loop_down_timer)));
}
@@ -2294,12 +2379,66 @@ qla2x00_down_timeout(struct semaphore *s
return -ETIMEDOUT;
}
+static struct qla_board_info qla_board_tbl[] = {
+ {
+ .drv_name = "qla2400",
+ .isp_name = "ISP2422",
+ .fw_fname = "ql2400_fw.bin",
+ },
+ {
+ .drv_name = "qla2400",
+ .isp_name = "ISP2432",
+ .fw_fname = "ql2400_fw.bin",
+ },
+};
+
+static struct pci_device_id qla2xxx_pci_tbl[] = {
+ {
+ .vendor = PCI_VENDOR_ID_QLOGIC,
+ .device = PCI_DEVICE_ID_QLOGIC_ISP2422,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (unsigned long)&qla_board_tbl[0],
+ },
+ {
+ .vendor = PCI_VENDOR_ID_QLOGIC,
+ .device = PCI_DEVICE_ID_QLOGIC_ISP2432,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .driver_data = (unsigned long)&qla_board_tbl[1],
+ },
+ {0, 0},
+};
+MODULE_DEVICE_TABLE(pci, qla2xxx_pci_tbl);
+
+static int __devinit
+qla2xxx_probe_one(struct pci_dev *pdev, const struct pci_device_id *id)
+{
+ return qla2x00_probe_one(pdev,
+ (struct qla_board_info *)id->driver_data);
+}
+
+static void __devexit
+qla2xxx_remove_one(struct pci_dev *pdev)
+{
+ qla2x00_remove_one(pdev);
+}
+
+static struct pci_driver qla2xxx_pci_driver = {
+ .name = "qla2xxx",
+ .id_table = qla2xxx_pci_tbl,
+ .probe = qla2xxx_probe_one,
+ .remove = __devexit_p(qla2xxx_remove_one),
+};
+
/**
* qla2x00_module_init - Module initialization.
**/
static int __init
qla2x00_module_init(void)
{
+ int ret = 0;
+
/* Allocate cache for SRBs. */
srb_cachep = kmem_cache_create("qla2xxx_srbs", sizeof(srb_t), 0,
SLAB_HWCACHE_ALIGN, NULL, NULL);
@@ -2320,7 +2459,12 @@ qla2x00_module_init(void)
return -ENODEV;
printk(KERN_INFO "QLogic Fibre Channel HBA Driver\n");
- return 0;
+ ret = pci_module_init(&qla2xxx_pci_driver);
+ if (ret) {
+ kmem_cache_destroy(srb_cachep);
+ fc_release_transport(qla2xxx_transport_template);
+ }
+ return ret;
}
/**
@@ -2329,6 +2473,7 @@ qla2x00_module_init(void)
static void __exit
qla2x00_module_exit(void)
{
+ pci_unregister_driver(&qla2xxx_pci_driver);
kmem_cache_destroy(srb_cachep);
fc_release_transport(qla2xxx_transport_template);
}
------------
--
Andrew Vasquez
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
