Re: 2.6.12-rc5: sleeping function called from invalid context (qla2xxx/scsi_transport_fc?)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Ake.Sandgren@xxxxxxxxxxxx (Ake) wrote:
>
> Hi!
> I got the following when i pulled the FC cable from one of my qla2312
> cards.
> This is a 2.6.12-rc5 kernel (with udm1 patches for 2.6.12-rc2)
> 
> 
> May 30 14:12:45 ican-i kernel: [ 1109.864830] qla2300 0000:03:09.0: LOOP DOWN detected.
> May 30 14:12:45 ican-i kernel: [ 1109.875948] Debug: sleeping function called from invalid context at include/linux/rwsem.h:43
> May 30 14:12:45 ican-i kernel: [ 1109.894492] in_atomic():1, irqs_disabled():1
> May 30 14:12:45 ican-i kernel: [ 1109.903864]  [dump_stack+30/48] dump_stack+0x1e/0x30
> May 30 14:12:45 ican-i kernel: [ 1109.913648]  [__might_sleep+167/176] __might_sleep+0xa7/0xb0
> May 30 14:12:45 ican-i kernel: [ 1109.924003]  [device_for_each_child+35/144] device_for_each_child+0x23/0x90
> May 30 14:12:45 ican-i kernel: [ 1109.935865]  [pg0+944279047/1069622272] scsi_target_block+0x57/0x60 [scsi_mod]
> May 30 14:12:45 ican-i kernel: [ 1109.949142]  [pg0+944996009/1069622272] fc_remote_port_block+0x39/0x60 [scsi_transport_fc]
> May 30 14:12:45 ican-i kernel: [ 1109.964649]  [pg0+946826440/1069622272] qla2x00_mark_all_devices_lost+0x78/0x80 [qla2xxx]
> May 30 14:12:45 ican-i kernel: [ 1109.980000]  [pg0+946857000/1069622272] qla2x00_async_event+0x4b8/0xd20 [qla2xxx]
> May 30 14:12:45 ican-i kernel: [ 1109.993778]  [pg0+946855321/1069622272] qla2300_intr_handler+0x149/0x220 [qla2xxx]
> May 30 14:12:45 ican-i kernel: [ 1110.007748]  [handle_IRQ_event+51/112] handle_IRQ_event+0x33/0x70
> May 30 14:12:45 ican-i kernel: [ 1110.018709]  [__do_IRQ+230/320] __do_IRQ+0xe6/0x140
> May 30 14:12:45 ican-i kernel: [ 1110.028321]  [do_IRQ+55/112] do_IRQ+0x37/0x70
> May 30 14:12:45 ican-i kernel: [ 1110.037362]  [common_interrupt+26/32] common_interrupt+0x1a/0x20
> May 30 14:12:45 ican-i kernel: [ 1110.048270]  [cpu_idle+114/128] cpu_idle+0x72/0x80
> May 30 14:12:45 ican-i kernel: [ 1110.057657]  [start_kernel+407/480] start_kernel+0x197/0x1e0
> May 30 14:12:45 ican-i kernel: [ 1110.068222]  [L6+0/2] 0xc010020e
> May 30 14:13:03 ican-i kernel: [ 1127.266792] qla2300 0000:03:09.0: LIP reset occured (f8e8).
> May 30 14:13:03 ican-i kernel: [ 1127.373378] qla2300 0000:03:09.0: LIP occured (f7e8).
> May 30 14:13:03 ican-i kernel: [ 1127.384479] qla2300 0000:03:09.0: LOOP UP detected (2 Gbps).
> 

This was reported (and anaylsed) a month ago:

	http://lkml.org/lkml/2005/4/29/82

I don't know if anything has been done about it yet though?
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux