|TEcHNO| <techno@xxxxxxxx> wrote: > > Hi, > > I've recently switched form 2.4.x kernel series to 2.6.x, and I've > encourted a problem with my old scanner card, lspci shows it as: > > <begin lspci output> > 00:0c.0 SCSI storage controller: DTC Technology Corp. Domex 536 > Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- > ParErr- Stepping- SERR- FastB2B- > Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium > >TAbort- <TAbort- <MAbort- >SERR- <PERR- > Interrupt: pin A routed to IRQ 11 > Region 0: I/O ports at d800 [size=32] > <end> > > It worked flawlessly under 2.4 kernels, but now it hangs xsane, and logs > show this: Is this crash still repeatable in 2.6.12-rc5? If so, can you please verify that it still occurs if the nvidia driver was never loaded? Thanks. > <begin /var/log/messages> > Apr 1 17:29:30 techno kernel: command: cdb[0]=0x0: 00 00 00 00 > 00 00 > Apr 1 17:29:40 techno last message repeated 3 times > <end> > > <begin /va/log/syslog> > Apr 1 17:29:30 techno kernel: scsi0 : aborting command > Apr 1 17:29:30 techno kernel: scsi0 : destination target 6, lun 0 > Apr 1 17:29:30 techno kernel: > Apr 1 17:29:30 techno kernel: NCR5380 core release=7. > Apr 1 17:29:30 techno kernel: Base Addr: 0x00000 io_port: d800 > IRQ: 11. > Apr 1 17:29:30 techno kernel: scsi0: no currently connected command > Apr 1 17:29:30 techno kernel: scsi0: issue_queue > Apr 1 17:29:30 techno kernel: scsi0 : destination target 6, lun 0 > Apr 1 17:29:30 techno kernel: command = 0 (0x00)00 00 00 00 00 > Apr 1 17:29:30 techno kernel: scsi0: disconnected_queue > Apr 1 17:29:30 techno kernel: > Apr 1 17:29:30 techno kernel: scsi0 : aborting command > Apr 1 17:29:30 techno kernel: scsi0 : destination target 6, lun 0 > Apr 1 17:29:30 techno kernel: > Apr 1 17:29:30 techno kernel: NCR5380 core release=7. > Apr 1 17:29:30 techno kernel: Base Addr: 0x00000 io_port: d800 > IRQ: 11. > Apr 1 17:29:30 techno kernel: scsi0: no currently connected command > Apr 1 17:29:30 techno kernel: scsi0: issue_queue > Apr 1 17:29:30 techno kernel: scsi0 : destination target 6, lun 0 > Apr 1 17:29:30 techno kernel: command = 0 (0x00)00 00 00 00 00 > Apr 1 17:29:30 techno kernel: scsi0: disconnected_queue > Apr 1 17:29:30 techno kernel: > Apr 1 17:29:40 techno kernel: scsi0 : aborting command > Apr 1 17:29:40 techno kernel: scsi0 : destination target 6, lun 0 > Apr 1 17:29:40 techno kernel: > Apr 1 17:29:40 techno kernel: NCR5380 core release=7. > Apr 1 17:29:40 techno kernel: Base Addr: 0x00000 io_port: d800 > IRQ: 11. > Apr 1 17:29:40 techno kernel: scsi0: no currently connected command > Apr 1 17:29:40 techno kernel: scsi0: issue_queue > Apr 1 17:29:40 techno kernel: scsi0 : destination target 6, lun 0 > Apr 1 17:29:40 techno kernel: command = 0 (0x00)00 00 00 00 00 > Apr 1 17:29:40 techno kernel: scsi0: disconnected_queue > Apr 1 17:29:40 techno kernel: > Apr 1 17:29:40 techno kernel: scsi0 : aborting command > Apr 1 17:29:40 techno kernel: scsi0 : destination target 6, lun 0 > Apr 1 17:29:40 techno kernel: > Apr 1 17:29:40 techno kernel: NCR5380 core release=7. > Apr 1 17:29:40 techno kernel: Base Addr: 0x00000 io_port: d800 > IRQ: 11. > Apr 1 17:29:40 techno kernel: scsi0: no currently connected command > Apr 1 17:29:40 techno kernel: scsi0: issue_queue > Apr 1 17:29:40 techno kernel: scsi0 : destination target 6, lun 0 > Apr 1 17:29:40 techno kernel: command = 0 (0x00)00 00 00 00 00 > Apr 1 17:29:40 techno kernel: scsi0: disconnected_queue > Apr 1 17:29:41 techno kernel: > Apr 1 17:29:41 techno kernel: Unable to handle kernel paging request at > virtual address 002b2c36 > Apr 1 17:29:41 techno kernel: printing eip: > Apr 1 17:29:41 techno kernel: c03f1e71 > Apr 1 17:29:41 techno kernel: *pde = 00000000 > Apr 1 17:29:41 techno kernel: Oops: 0000 [#1] > Apr 1 17:29:41 techno kernel: PREEMPT > Apr 1 17:29:41 techno kernel: Modules linked in: nvidia > Apr 1 17:29:41 techno kernel: CPU: 0 > Apr 1 17:29:41 techno kernel: EIP: 0060:[<c03f1e71>] Tainted: P > VLI > Apr 1 17:29:41 techno kernel: EFLAGS: 00010202 (2.6.11.3) > Apr 1 17:29:41 techno kernel: EIP is at sg_cmd_done+0x41/0x2f0 > Apr 1 17:29:41 techno kernel: eax: 00000000 ebx: cd4ee600 ecx: > db821dec edx: db83d040 > Apr 1 17:29:41 techno kernel: esi: ca037038 edi: 002b2c32 ebp: > db83d040 esp: db84deec > Apr 1 17:29:41 techno kernel: ds: 007b es: 007b ss: 0068 > Apr 1 17:29:41 techno kernel: Process scsi_eh_0 (pid: 1096, > threadinfo=db84c000 task=dbcf40e0) > Apr 1 17:29:41 techno kernel: Stack: c060e3b5 db84defc c03e7c31 > c060e3b5 c07bc620 db84df10 db821c00 00050000 > Apr 1 17:29:41 techno kernel: 00000000 00000001 c03e97fa > db83d040 00000000 00000001 00000246 db83d040 > Apr 1 17:29:41 techno kernel: db84c000 c03dacce db83d040 > c03dab30 c03dab10 00000000 00000000 db84df48 > Apr 1 17:29:41 techno kernel: Call Trace: > Apr 1 17:29:41 techno kernel: [<c03e7c31>] NCR5380_print_status+0x51/0x60 > Apr 1 17:29:41 techno kernel: [<c03e97fa>] NCR5380_abort+0x14a/0x160 > Apr 1 17:29:41 techno kernel: [<c03dacce>] scsi_send_eh_cmnd+0x13e/0x170 > Apr 1 17:29:41 techno kernel: [<c03dab30>] scsi_eh_done+0x0/0x60 > Apr 1 17:29:41 techno kernel: [<c03dab10>] scsi_eh_times_out+0x0/0x20 > Apr 1 17:29:41 techno kernel: [<c03db045>] scsi_eh_tur+0x95/0xd0 > Apr 1 17:29:41 techno kernel: [<c03db0e9>] scsi_eh_abort_cmds+0x69/0x80 > Apr 1 17:29:41 techno kernel: [<c03dbd11>] scsi_unjam_host+0xa1/0xd0 > Apr 1 17:29:41 techno kernel: [<c011b9c2>] complete+0x52/0x80 > Apr 1 17:29:41 techno kernel: [<c03dbddf>] scsi_error_handler+0x9f/0xd0 > Apr 1 17:29:41 techno kernel: [<c03dbd40>] scsi_error_handler+0x0/0xd0 > Apr 1 17:29:41 techno kernel: [<c01012fd>] kernel_thread_helper+0x5/0x18 > Apr 1 17:29:41 techno kernel: Code: 1c 89 7c 24 20 0f 84 b1 02 00 00 8b > 5d 0c 85 db 0f 84 a6 02 00 00 8b b3 ac 00 00 00 85 f6 0f 84 98 02 00 00 > 8b 7e 08 85 ff 74 13 <8b> 47 04 85 c0 89 44 24 0c 74 08 0f b6 40 14 84 > c0 74 2c c7 04 > Apr 1 17:29:41 techno kernel: <6>note: scsi_eh_0[1096] exited with > preempt_count 1 > <end> > > I hope thant you can either tell me what's wrong, or anyone coudl look > at the code and fix the problem? > As an additional note I have ScanMagic 9636 S Plus Scanner with the card > thad it was sold with. > As a side not I can tell It was working with 2.4 series, but scanning > coused the mashing to either hang for a few seconds (one or twice hang > for good), while the scanning caused the machine to become jaggy, the > music played (xmms), but the graphic wasn't working well. > > I'm not subscribed so please CC to me too. > -- > pozdrawiam |"Help me master, I felt the burning twilight behind > techno@xxxxxxxx|those gates of stell..." --Perihelion, Prophecy Sequence > - > : send the line "unsubscribe linux-kernel" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html > Please read the FAQ at http://www.tux.org/lkml/ - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
