sdparm is a command line utility designed to get and set
SCSI disk parameters (cf hdparm for ATA disks). More generally
it gets and sets mode page information on SCSI devices or devices
that use a SCSI command set (e.g. CD/DVD drives (any transport)
and SCSI tape drives). It also can list VPD pages including
the device identification page.
For more information and downloads (tarball, rpm and deb
packages) see:
http://www.torque.net/sg/sdparm.html
There are now more than 150 parameters accessed by sdparm.
Thanks to Kai Makisara for interface and sanity checking
suggestions.
ChangeLog for sdparm-0.92 [20050520]
- add data compression and device configuration mode
pages (ssc3)
- add timeout + protect plus write parameters mode
pages (mmc5)
- add XOR control mode page (sbc2)
- add SES management mode page (ses2)
- discriminate mode pages based on device's peripheral
device type
- disallow set/clear acronyms whose pdt doesn't match
current device
- with option "-ll" decode more of INQUIRY standard
response
- improve error checking when getting non-existent
fields
- use double fetch technique when fetching mode pages
- add RBC device parameters mode page (rbc)
- add '--flexible' option for mode sense 6/10 response
mixup
- '--inquiry -all' now outputs supported VPD pages page
Doug Gilbert
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
