James Bottomley wrote: > On Thu, 2005-05-19 at 15:21 +0530, Dinakar Guniguntala wrote: > >>This doesn't seem to fix the problem :( >>I tried both 2.6.12-rc4+patch and 2.6.4-rc4-mm1+patch > > > Well ... great, it doesn't work for anyone, sigh. > > OK, could you try this one (also against vanilla 2.6.12-rc4). Hopefully > it's a rollup of all the aic7xxx changes plus the necessary supporting > infrastructure in my scsi-misc tree. > > If it works, trying to get it into a patch set for Linus is going to be > a right pain ... > > James > <snip> James, It does work with the exception that my u160 drive is still identified as 80MB/s. May 19 19:36:46 porky kernel: scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 May 19 19:36:46 porky kernel: <Adaptec aic7899 Ultra160 SCSI adapter> May 19 19:36:46 porky kernel: aic7899: Ultra160 Wide Channel A, SCSI Id=7, 32/253 SCBs May 19 19:36:46 porky kernel: May 19 19:36:46 porky kernel: Vendor: QUANTUM Model: ATLAS10K2-TY092L Rev: DA40 May 19 19:36:46 porky kernel: Type: Direct-Access ANSI SCSI revision: 03 May 19 19:36:46 porky kernel: scsi0:A:0:0: Tagged Queuing enabled. Depth 32 May 19 19:36:46 porky kernel: target0:0:0: Beginning Domain Validation May 19 19:36:46 porky kernel: WIDTH IS 1 May 19 19:36:46 porky kernel: (scsi0:A:0): 6.600MB/s transfers (16bit) May 19 19:36:46 porky kernel: (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 127, 16bit) May 19 19:36:46 porky kernel: target0:0:0: Ending Domain Validation May 19 19:36:46 porky kernel: scsi1 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36 May 19 19:36:46 porky kernel: <Adaptec aic7899 Ultra160 SCSI adapter> May 19 19:36:46 porky kernel: aic7899: Ultra160 Wide Channel B, SCSI Id=7, 32/253 SCBs May 19 19:36:46 porky kernel: May 19 19:36:46 porky kernel: Vendor: SEAGATE Model: SX118273LC Rev: 6679 May 19 19:36:46 porky kernel: Type: Direct-Access ANSI SCSI revision: 02 May 19 19:36:46 porky kernel: scsi1:A:0:0: Tagged Queuing enabled. Depth 32 May 19 19:36:46 porky kernel: target1:0:0: Beginning Domain Validation May 19 19:36:46 porky kernel: target1:0:0: Domain Validation skipping write tests May 19 19:36:46 porky kernel: (scsi1:A:0): 20.000MB/s transfers (20.000MHz, offset 15) May 19 19:36:46 porky kernel: target1:0:0: Ending Domain Validation May 19 19:36:46 porky kernel: SCSI device sda: 17783239 512-byte hdwr sectors (9105 MB) May 19 19:36:46 porky kernel: SCSI device sda: drive cache: write back May 19 19:36:46 porky kernel: SCSI device sda: 17783239 512-byte hdwr sectors (9105 MB) May 19 19:36:46 porky kernel: SCSI device sda: drive cache: write back May 19 19:36:46 porky kernel: sda: sda1 sda2 sda3 May 19 19:36:46 porky kernel: Attached scsi disk sda at scsi0, channel 0, id 0, lun 0 May 19 19:36:46 porky kernel: SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB) May 19 19:36:46 porky kernel: SCSI device sdb: drive cache: write through May 19 19:36:46 porky kernel: SCSI device sdb: 35566480 512-byte hdwr sectors (18210 MB) May 19 19:36:46 porky kernel: SCSI device sdb: drive cache: write through May 19 14:36:26 porky rc.sysinit: -e May 19 19:36:46 porky kernel: sdb: sdb1 May 19 14:36:28 porky udevsend[1227]: starting udevd daemon May 19 19:36:46 porky kernel: Attached scsi disk sdb at scsi1, channel 0, id 0, lun 0 May 19 14:36:28 porky scsi.agent[1239]: disk at /devices/pci0000:00/0000:00:1e.0/0000:04:05.0/host0/target0:0:0/0:0:0:0 May 19 19:36:46 porky kernel: Attached scsi generic sg0 at scsi0, channel 0, id 0, lun 0, type 0 May 19 14:36:28 porky scsi.agent[1264]: disk at /devices/pci0000:00/0000:00:1e.0/0000:04:05.1/host1/target1:0:0/1:0:0:0 May 19 19:36:46 porky kernel: Attached scsi generic sg1 at scsi1, channel 0, id 0, lun 0, type 0 -- kr - : send the line "unsubscribe linux-scsi" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
