On Tue, May 17, 2005 at 12:29:08AM -0700, Andrew Morton wrote:
> Better cc linux-scsi.
Thanks
> Are these bugs also present in 2.6.12-rc4?
Yes, I tried a vanilla 2.6.12-rc4 and I get the same output.
I get this from 2.6.12-rc3 onwards.
Maybe something from the following changeset of 2.6.12-rc3 ??
jejb@xxxxxxxxxxxxxxxxxxxxxxx:
[PATCH] finally fix 53c700 to use the generic iomem infrastructure
[PATCH] Convert i2o to compat_ioctl
[PATCH] Convert i2o to compat_ioctl
aic7xxx: add support for the SPI transport class
aic7xxx: convert to SPI transport class Domain Validation
lpfc: add Emulex FC driver version 8.0.28
qla2xxx: fix compiler warning in qla_attr.c
scsi: add DID_REQUEUE to the error handling
scsi: add DID_REQUEUE to the error handling
updates for CFQ oops fix
zfcp: add point-2-point support
zfcp: add point-2-point support
-Dinakar
> > This is controller that I have
> >
> > 00:0e.0 SCSI storage controller: Adaptec AIC-7896U2/7897U2
> >
> > I never used to get warning such as "refuses WIDE negotiation"
> > in kernels prior to 2.6.12-rc3-mm3.
> > The machine (x86) boots up fine though.
> >
> > Here's the relevant dmesg output from 2.6.12-rc4-mm1
> >
> > ======================================================================
> >
> > scsi0 : Adaptec AIC7XXX EISA/VLB/PCI SCSI HBA DRIVER, Rev 6.2.36
> > <Adaptec aic7896/97 Ultra2 SCSI adapter>
> > aic7896/97: Ultra2 Wide Channel B, SCSI Id=7, 32/253 SCBs
> >
> > Vendor: IBM-PSG Model: ST39103LC !# Rev: B227
> > Type: Direct-Access ANSI SCSI revision: 02
> > scsi0:A:0:0: Tagged Queuing enabled. Depth 32
> > target0:0:0: Beginning Domain Validation
> > WIDTH IS 1
> > (scsi0:A:0): 6.600MB/s transfers (16bit)
> > target0:0:0: Domain Validation skipping write tests
> > (scsi0:A:0): 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
> > target0:0:0: Ending Domain Validation
> > Vendor: IBM-PSG Model: ST39103LC !# Rev: B227
> > Type: Direct-Access ANSI SCSI revision: 02
> > scsi0:A:1:0: Tagged Queuing enabled. Depth 32
> > target0:0:1: Beginning Domain Validation
> > WIDTH IS 1
> > (scsi0:A:1): 6.600MB/s transfers (16bit)
> > target0:0:1: Domain Validation skipping write tests
> > (scsi0:A:1): 80.000MB/s transfers (40.000MHz, offset 15, 16bit)
> > target0:0:1: Ending Domain Validation
> > (scsi0:A:15:0): refuses WIDE negotiation. Using 8bit transfers <============
> > scsi0:0:15:0: Attempting to queue an ABORT message
> > CDB: 0x12 0x0 0x0 0x0 0x36 0x0
> > scsi0: At time of recovery, card was not paused
> > >>>>>>>>>>>>>>>>>> Dump Card State Begins <<<<<<<<<<<<<<<<<
> > scsi0: Dumping Card State in Data-in phase, at SEQADDR 0x85
> > Card was paused
> > ACCUM = 0x40, SINDEX = 0xa, DINDEX = 0xe4, ARG_2 = 0x0
> > HCNT = 0x36 SCBPTR = 0x0
> > SCSISIGI[0x46] ERROR[0x0] SCSIBUSL[0x3] LASTPHASE[0x40]
> > SCSISEQ[0x12] SBLKCTL[0xa] SCSIRATE[0x0] SEQCTL[0x10]
> > SEQ_FLAGS[0x20] SSTAT0[0x0] SSTAT1[0x2] SSTAT2[0x40]
> > SSTAT3[0x0] SIMODE0[0x8] SIMODE1[0xac] SXFRCTL0[0x80]
> > DFCNTRL[0x28] DFSTATUS[0x80]
> > STACK: 0x0 0x160 0x176 0x83
> > SCB count = 4
> > Kernel NEXTQSCB = 3
> > Card NEXTQSCB = 3
> > QINFIFO entries:
> > Waiting Queue entries:
> > Disconnected Queue entries:
> > QOUTFIFO entries:
> > Sequencer Free SCB List: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
> > Sequencer SCB Info:
> > 0 SCB_CONTROL[0x40] SCB_SCSIID[0xf7] SCB_LUN[0x0] SCB_TAG[0x2]
> > 1 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 2 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 3 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 4 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 5 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 6 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 7 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 8 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 9 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 10 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 11 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 12 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 13 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 14 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 15 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 16 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 17 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 18 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 19 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 20 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 21 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 22 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 23 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 24 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 25 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 26 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 27 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 28 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 29 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 30 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > 31 SCB_CONTROL[0x0] SCB_SCSIID[0xff] SCB_LUN[0xff] SCB_TAG[0xff]
> > Pending list:
> > 2 SCB_CONTROL[0x40] SCB_SCSIID[0xf7] SCB_LUN[0x0]
> > Kernel Free SCB list: 1 0
> > Untagged Q(15): 2
> > DevQ(0:0:0): 0 waiting
> > DevQ(0:1:0): 0 waiting
> > DevQ(0:15:0): 0 waiting
> >
> > <<<<<<<<<<<<<<<<< Dump Card State Ends >>>>>>>>>>>>>>>>>>
> > scsi0:0:15:0: Device is active, asserting ATN
> > Recovery code sleeping
> > Recovery code awake
> > Timer Expired
> > aic7xxx_abort returns 0x2003
> > scsi0:0:15:0: Attempting to queue a TARGET RESET message
> > CDB: 0x12 0x0 0x0 0x0 0x36 0x0
> > aic7xxx_dev_reset returns 0x2003
> > Recovery SCB completes
> > (scsi0:A:15:0): refuses WIDE negotiation. Using 8bit transfers
> > (scsi0:A:15:0): refuses WIDE negotiation. Using 8bit transfers
> > scsi0:0:15:0: Attempting to queue an ABORT message
> > CDB: 0x12 0x0 0x0 0x0 0x36 0x0
> > scsi0: At time of recovery, card was not paused
> >
> >
> > ======================================================================
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
