Re: Empty partition nodes not created (was device node issues with recent mm's and udev)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Mon, May 02, 2005 at 10:51:24PM -0400, Joe wrote:
> Ok, first off I'd like to say, I am on 2.6.12-rc3-mm2, and this issue
> is not fixed at all.  Secondly, I'd like to say that I've pinpointed
> it a bit more.  It appears only Empty partitions (type 0 in fdisk) do
> not create device nodes.
> 
> Here is the partition table from fdisk, fdisk does run fine.. its just
> the fact this node is not created that threw me off before.
> 
>    Device Boot      Start         End      Blocks   Id  System
> /dev/sdb1   *           1           2       16033+   0  Empty
> /dev/sdb2   *           6        2431    19486845    b  W95 FAT32
> /dev/sdb3               3           5       24097+  83  Linux
> 
> 
> Notice, /dev/sdb1 is a Empty partition... in /dev I only have sdb,
> sdb2, and sdb3.  No sdb1.  Any help would be appreciated.

Looks like it might be a scsi issue.  Redirecting to that mailing list
now.  Anyone here have a clue?

thanks,

greg k-h
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux