Re: Emulex fibre channel HBA support and SAN connection

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Fri, Apr 29, 2005 at 07:37:01AM -0400, James.Smart@xxxxxxxxxx wrote:
> Based on the "Unknown IOCB command data" message, this appears to be out of date firmware on the adapter. See http://www.emulex.com/ts/indexemu.html.  There are some hints on downloading firmware at the tail end of  http://sourceforge.net/forum/forum.php?thread_id=1130082&forum_id=355154. 

I've seeb quite a bit of these old firmware problems, maybe lpfc should
have a table of minimum required firmware versions for each HBA type?

-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux