Re: Raid1 on Dell Poweredge with Perc4e/Di Raid Controller running Debian Sarge (3.1)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Denis,
this is what I just did

cd /usr/src/kernel-image-2.6.8
patch -l < ./megaraid-v2.20.4.6/2.6.8-24.patch
cd /boot
cp config-2.6.8-24.14-default /usr/src/linux/.config
cd /usr/src/linux
make oldconfig 
make
make modules_install
cp /usr/src/linux/arch/i386/boot/bzImage /boot/vmlinuz-2.6.8
cp System.map /usr/src/linux/System.map /boot/System.map-2.6.8
[Edited /boot/grub/menu.lst]
[Added the line megaraid_mbox to /etc/modules.conf Note: there war no entry 
megaraid2 or similar in this file]
server:/boot # mkinitrd -o /boot/initrd.img-2.6.8-1 2.6.8-1
Fatal:
Fatal: Module megaraid2 not found.
Warning: This failure MAY indicate that your kernel will not boot!
but it can also be triggered by needed modules being compiled into the
kernel.

Any ideas? Please help! Thanks!

Regards,
Oliver

On Friday 22 April 2005 21:14, you wrote:
> For that you'll need to edit /etc/modules.conf and change the megaraid2
> entry to megaraid_mbox. Also, make sure you have the latest version of
> mkinitrd (to recognize the .ko module extension).
>
> Good luck,
> Dennis
>
>
>
> -----Original Message-----
> From: linux-poweredge-bounces@xxxxxxxx
> [mailto:linux-poweredge-bounces@xxxxxxxx] On Behalf Of
> oliver@xxxxxxxxxxxxxx Sent: Friday, April 22, 2005 3:08 PM
> To: Ju, Seokmann; aschultz@xxxxxxxxxx; Matt_Domsch@xxxxxxxx;
> linux-poweredge@xxxxxxxx; linux-scsi@xxxxxxxxxxxxxxx; Jonas Kaufmann;
> Thomas Glas; Sebastian Kamp Subject: Re: Raid1 on Dell Poweredge with
> Perc4e/Di Raid Controller runnin gDebian Sarge (3.1)
>
> Hello Ju,
> thanks for your help. I am a total newbie but I managed to compile a new
> kernel with your patch:
>
> /boot/vmlinuz-2.6.8-1
>
> Then I did:
> server:/boot # mkinitrd -o /boot/initrd.img-2.6.8-1 2.6.8-1
> Fatal: Module megaraid2 not found.
> Warning: This failure MAY indicate that your kernel will not boot!
> but it can also be triggered by needed modules being compiled into the
> kernel.
>
> Does this mean, that you patch is not working or did I make a mistake?
>
> Best regards,
> Oliver
>
> On Friday 22 April 2005 15:30, you wrote:
> > On Thursday, April 21, 2005 4:31 AM, Oliver wrote,
> >
> > > Is there a megaraid driver for the 2.6.8 kernel? If so, where?
> >
> > Try attached. It has driver source with one patch file (2.6.8-24.patch).
> > Please make sure to apply the patch before compile.
> >
> > Thank you.
> >
> > > -----Original Message-----
> > > From: oliver@xxxxxxxxxxxxxx [mailto:oliver@xxxxxxxxxxxxxx]
> > > Sent: Thursday, April 21, 2005 4:31 AM
> > > To: Matt_Domsch@xxxxxxxx; linux-poweredge@xxxxxxxx;
> > > linux-scsi@xxxxxxxxxxxxxxx
> > > Cc: Thomas Glas
> > > Subject: Raid1 on Dell Poweredge with Perc4e/Di Raid
> > > Controller running Debian Sarge (3.1)
> > >
> > > Hello,
> > > I would like to use Raid1 on the Dell Poweredge with
> > > Perc4e/Di Raid Controller
> > > and two 2 73 GB drives running Debian Sarge (3.1).
> > >
> > > At http://linux.dell.com/storage.shtml I read that the
> > > Powerege 2850 Perc4e/Di
> > > requires megaraid2 driver 2.00.3 or higher on 2.4.x kernel.
> > > On 2.6.x kernels
> > > (x < 9) there is no driver for these adapters. On 2.6.x (x >=
> > > 9) use the
> > > 'megaraid_mbox' and 'megaraid_mm' drivers.
> > >
> > > Problem: The Debian Installers offers only to install:
> > >
> > > - 2.4.x (which seems to be okay for the raid) OR
> > > - 2.6.8 (which would not allow the use of the Raid)
> > >
> > > Solution:
> > > Is there a megaraid driver for the 2.6.8 kernel? If so, where?
> > >
> > > If not, should I use 2.4.x kernel or try to install a 2.6.9
> > > kernel on Debian
> > > Sarge?
> > >
> > > --
> > > Oliver König
> > >
> > > Windfinder.com
> > > Knorrstr. 24 Hinterhaus
> > > 24106 Kiel
> > > Germany
> > > phone +49 431-8008643
> > > VoIP +49 1801-7775558229
> > > fax +49 431-8008644
> > > Mobile +49 177-4933362
> > > oliver@xxxxxxxxxxxxxx
> > > www.windfinder.com
> > > -
> > > : send the line "unsubscribe
> > > linux-scsi" in
> > > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > > More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Oliver König

Windfinder.com
Knorrstr. 24 Hinterhaus
24106 Kiel
Germany
phone +49 431-8008643
VoIP +49 1801-7775558229
fax +49 431-8008644
Mobile +49 177-4933362
oliver@xxxxxxxxxxxxxx
www.windfinder.com
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux