Re: Raid1 on Dell Poweredge with Perc4e/Di Raid Controller runnin g Debian Sarge (3.1)

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hello Ju,
thanks for your help. I am a total newbie but I managed to compile a new 
kernel with your patch:

/boot/vmlinuz-2.6.8-1

Then I did:
server:/boot # mkinitrd -o /boot/initrd.img-2.6.8-1 2.6.8-1
Fatal: Module megaraid2 not found.
Warning: This failure MAY indicate that your kernel will not boot! 
but it can also be triggered by needed modules being compiled into the kernel.

Does this mean, that you patch is not working or did I make a mistake?

Best regards,
Oliver



On Friday 22 April 2005 15:30, you wrote:
> On Thursday, April 21, 2005 4:31 AM, Oliver wrote,
>
> > Is there a megaraid driver for the 2.6.8 kernel? If so, where?
>
> Try attached. It has driver source with one patch file (2.6.8-24.patch).
> Please make sure to apply the patch before compile.
>
> Thank you.
>
> > -----Original Message-----
> > From: oliver@xxxxxxxxxxxxxx [mailto:oliver@xxxxxxxxxxxxxx]
> > Sent: Thursday, April 21, 2005 4:31 AM
> > To: Matt_Domsch@xxxxxxxx; linux-poweredge@xxxxxxxx;
> > linux-scsi@xxxxxxxxxxxxxxx
> > Cc: Thomas Glas
> > Subject: Raid1 on Dell Poweredge with Perc4e/Di Raid
> > Controller running Debian Sarge (3.1)
> >
> > Hello,
> > I would like to use Raid1 on the Dell Poweredge with
> > Perc4e/Di Raid Controller
> > and two 2 73 GB drives running Debian Sarge (3.1).
> >
> > At http://linux.dell.com/storage.shtml I read that the
> > Powerege 2850 Perc4e/Di
> > requires megaraid2 driver 2.00.3 or higher on 2.4.x kernel.
> > On 2.6.x kernels
> > (x < 9) there is no driver for these adapters. On 2.6.x (x >=
> > 9) use the
> > 'megaraid_mbox' and 'megaraid_mm' drivers.
> >
> > Problem: The Debian Installers offers only to install:
> >
> > - 2.4.x (which seems to be okay for the raid) OR
> > - 2.6.8 (which would not allow the use of the Raid)
> >
> > Solution:
> > Is there a megaraid driver for the 2.6.8 kernel? If so, where?
> >
> > If not, should I use 2.4.x kernel or try to install a 2.6.9
> > kernel on Debian
> > Sarge?
> >
> > --
> > Oliver KÃnig
> >
> > Windfinder.com
> > Knorrstr. 24 Hinterhaus
> > 24106 Kiel
> > Germany
> > phone +49 431-8008643
> > VoIP +49 1801-7775558229
> > fax +49 431-8008644
> > Mobile +49 177-4933362
> > oliver@xxxxxxxxxxxxxx
> > www.windfinder.com
> > -
> > : send the line "unsubscribe
> > linux-scsi" in
> > the body of a message to majordomo@xxxxxxxxxxxxxxx
> > More majordomo info at  http://vger.kernel.org/majordomo-info.html

-- 
Oliver KÃnig

Windfinder.com
Knorrstr. 24 Hinterhaus
24106 Kiel
Germany
phone +49 431-8008643
VoIP +49 1801-7775558229
fax +49 431-8008644
Mobile +49 177-4933362
oliver@xxxxxxxxxxxxxx
www.windfinder.com
-
: send the line "unsubscribe linux-scsi" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[Index of Archives]     [SCSI Target Devel]     [Linux SCSI Target Infrastructure]     [Kernel Newbies]     [IDE]     [Security]     [Git]     [Netfilter]     [Bugtraq]     [Yosemite News]     [MIPS Linux]     [ARM Linux]     [Linux Security]     [Linux RAID]     [Linux ATA RAID]     [Linux IIO]     [Samba]     [Device Mapper]
  Powered by Linux