Convert Samsung Exynos5422 SoC frequency and voltage scaling for
Dynamic Memory Controller to DT schema format using json-schema.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
---
.../memory-controllers/exynos5422-dmc.txt | 84 -----------
.../samsung,exynos5422-dmc.yaml | 137 ++++++++++++++++++
MAINTAINERS | 2 +-
3 files changed, 138 insertions(+), 85 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
create mode 100644 Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
diff --git a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt b/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
deleted file mode 100644
index 02e4a1f862f1..000000000000
--- a/Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
+++ /dev/null
@@ -1,84 +0,0 @@
-* Exynos5422 frequency and voltage scaling for Dynamic Memory Controller device
-
-The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the DRAM
-memory chips are connected. The driver is to monitor the controller in runtime
-and switch frequency and voltage. To monitor the usage of the controller in
-runtime, the driver uses the PPMU (Platform Performance Monitoring Unit), which
-is able to measure the current load of the memory.
-When 'userspace' governor is used for the driver, an application is able to
-switch the DMC and memory frequency.
-
-Required properties for DMC device for Exynos5422:
-- compatible: Should be "samsung,exynos5422-dmc".
-- clocks : list of clock specifiers, must contain an entry for each
- required entry in clock-names for CLK_FOUT_SPLL, CLK_MOUT_SCLK_SPLL,
- CLK_FF_DOUT_SPLL2, CLK_FOUT_BPLL, CLK_MOUT_BPLL, CLK_SCLK_BPLL,
- CLK_MOUT_MX_MSPLL_CCORE, CLK_MOUT_MX_MSPLL_CCORE_PHY, CLK_MOUT_MCLK_CDREX,
-- clock-names : should include "fout_spll", "mout_sclk_spll", "ff_dout_spll2",
- "fout_bpll", "mout_bpll", "sclk_bpll", "mout_mx_mspll_ccore",
- "mout_mclk_cdrex" entries
-- devfreq-events : phandles for PPMU devices connected to this DMC.
-- vdd-supply : phandle for voltage regulator which is connected.
-- reg : registers of two CDREX controllers.
-- operating-points-v2 : phandle for OPPs described in v2 definition.
-- device-handle : phandle of the connected DRAM memory device. For more
- information please refer to documentation file:
- Documentation/devicetree/bindings/ddr/lpddr3.txt
-- devfreq-events : phandles of the PPMU events used by the controller.
-- samsung,syscon-clk : phandle of the clock register set used by the controller,
- these registers are used for enabling a 'pause' feature and are not
- exposed by clock framework but they must be used in a safe way.
- The register offsets are in the driver code and specyfic for this SoC
- type.
-
-Optional properties for DMC device for Exynos5422:
-- interrupt-parent : The parent interrupt controller.
-- interrupts : Contains the IRQ line numbers for the DMC internal performance
- event counters in DREX0 and DREX1 channels. Align with specification of the
- interrupt line(s) in the interrupt-parent controller.
-- interrupt-names : IRQ names "drex_0" and "drex_1", the order should be the
- same as in the 'interrupts' list above.
-
-Example:
-
- ppmu_dmc0_0: ppmu@10d00000 {
- compatible = "samsung,exynos-ppmu";
- reg = <0x10d00000 0x2000>;
- clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
- clock-names = "ppmu";
- events {
- ppmu_event_dmc0_0: ppmu-event3-dmc0_0 {
- event-name = "ppmu-event3-dmc0_0";
- };
- };
- };
-
- dmc: memory-controller@10c20000 {
- compatible = "samsung,exynos5422-dmc";
- reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
- clocks = <&clock CLK_FOUT_SPLL>,
- <&clock CLK_MOUT_SCLK_SPLL>,
- <&clock CLK_FF_DOUT_SPLL2>,
- <&clock CLK_FOUT_BPLL>,
- <&clock CLK_MOUT_BPLL>,
- <&clock CLK_SCLK_BPLL>,
- <&clock CLK_MOUT_MX_MSPLL_CCORE>,
- <&clock CLK_MOUT_MCLK_CDREX>;
- clock-names = "fout_spll",
- "mout_sclk_spll",
- "ff_dout_spll2",
- "fout_bpll",
- "mout_bpll",
- "sclk_bpll",
- "mout_mx_mspll_ccore",
- "mout_mclk_cdrex";
- operating-points-v2 = <&dmc_opp_table>;
- devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>,
- <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
- device-handle = <&samsung_K3QF2F20DB>;
- vdd-supply = <&buck1_reg>;
- samsung,syscon-clk = <&clock>;
- interrupt-parent = <&combiner>;
- interrupts = <16 0>, <16 1>;
- interrupt-names = "drex_0", "drex_1";
- };
diff --git a/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
new file mode 100644
index 000000000000..b168a9c8bfde
--- /dev/null
+++ b/Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
@@ -0,0 +1,137 @@
+# SPDX-License-Identifier: GPL-2.0
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/memory-controllers/samsung,exynos5422-dmc.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: |
+ Samsung Exynos5422 SoC frequency and voltage scaling for Dynamic Memory
+ Controller device
+
+maintainers:
+ - Krzysztof Kozlowski <krzysztof.kozlowski@xxxxxxxxxxxxx>
+ - Lukasz Luba <lukasz.luba@xxxxxxx>
+
+description: |
+ The Samsung Exynos5422 SoC has DMC (Dynamic Memory Controller) to which the
+ DRAM memory chips are connected. The driver is to monitor the controller in
+ runtime and switch frequency and voltage. To monitor the usage of the
+ controller in runtime, the driver uses the PPMU (Platform Performance
+ Monitoring Unit), which is able to measure the current load of the memory.
+ When 'userspace' governor is used for the driver, an application is able to
+ switch the DMC and memory frequency.
+
+properties:
+ compatible:
+ items:
+ - const: samsung,exynos5422-dmc
+
+ clock-names:
+ items:
+ - const: fout_spll
+ - const: mout_sclk_spll
+ - const: ff_dout_spll2
+ - const: fout_bpll
+ - const: mout_bpll
+ - const: sclk_bpll
+ - const: mout_mx_mspll_ccore
+ - const: mout_mclk_cdrex
+
+ clocks:
+ minItems: 8
+ maxItems: 8
+
+ devfreq-events:
+ $ref: '/schemas/types.yaml#/definitions/phandle-array'
+ minItems: 1
+ maxItems: 16
+ description: phandles of the PPMU events used by the controller.
+
+ device-handle:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: |
+ phandle of the connected DRAM memory device. For more information please
+ refer to documentation file: Documentation/devicetree/bindings/ddr/lpddr3.txt
+
+ operating-points-v2: true
+
+ interrupts:
+ items:
+ - description: DMC internal performance event counters in DREX0
+ - description: DMC internal performance event counters in DREX1
+
+ interrupt-names:
+ items:
+ - const: drex_0
+ - const: drex_1
+
+ reg:
+ items:
+ - description: registers of DREX0
+ - description: registers of DREX1
+
+ samsung,syscon-clk:
+ $ref: '/schemas/types.yaml#/definitions/phandle'
+ description: |
+ Phandle of the clock register set used by the controller, these registers
+ are used for enabling a 'pause' feature and are not exposed by clock
+ framework but they must be used in a safe way. The register offsets are
+ in the driver code and specyfic for this SoC type.
+
+ vdd-supply: true
+
+required:
+ - compatible
+ - clock-names
+ - clocks
+ - devfreq-events
+ - device-handle
+ - reg
+ - samsung,syscon-clk
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/exynos5420.h>
+ ppmu_dmc0_0: ppmu@10d00000 {
+ compatible = "samsung,exynos-ppmu";
+ reg = <0x10d00000 0x2000>;
+ clocks = <&clock CLK_PCLK_PPMU_DREX0_0>;
+ clock-names = "ppmu";
+ events {
+ ppmu_event_dmc0_0: ppmu-event3-dmc0_0 {
+ event-name = "ppmu-event3-dmc0_0";
+ };
+ };
+ };
+
+ memory-controller@10c20000 {
+ compatible = "samsung,exynos5422-dmc";
+ reg = <0x10c20000 0x10000>, <0x10c30000 0x10000>;
+ clocks = <&clock CLK_FOUT_SPLL>,
+ <&clock CLK_MOUT_SCLK_SPLL>,
+ <&clock CLK_FF_DOUT_SPLL2>,
+ <&clock CLK_FOUT_BPLL>,
+ <&clock CLK_MOUT_BPLL>,
+ <&clock CLK_SCLK_BPLL>,
+ <&clock CLK_MOUT_MX_MSPLL_CCORE>,
+ <&clock CLK_MOUT_MCLK_CDREX>;
+ clock-names = "fout_spll",
+ "mout_sclk_spll",
+ "ff_dout_spll2",
+ "fout_bpll",
+ "mout_bpll",
+ "sclk_bpll",
+ "mout_mx_mspll_ccore",
+ "mout_mclk_cdrex";
+ operating-points-v2 = <&dmc_opp_table>;
+ devfreq-events = <&ppmu_event3_dmc0_0>, <&ppmu_event3_dmc0_1>,
+ <&ppmu_event3_dmc1_0>, <&ppmu_event3_dmc1_1>;
+ device-handle = <&samsung_K3QF2F20DB>;
+ vdd-supply = <&buck1_reg>;
+ samsung,syscon-clk = <&clock>;
+ interrupt-parent = <&combiner>;
+ interrupts = <16 0>, <16 1>;
+ interrupt-names = "drex_0", "drex_1";
+ };
diff --git a/MAINTAINERS b/MAINTAINERS
index ebdb07a49b02..eb4ada858826 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5570,7 +5570,7 @@ M: Lukasz Luba <lukasz.luba@xxxxxxx>
L: linux-pm@xxxxxxxxxxxxxxx
L: linux-samsung-soc@xxxxxxxxxxxxxxx
S: Maintained
-F: Documentation/devicetree/bindings/memory-controllers/exynos5422-dmc.txt
+F: Documentation/devicetree/bindings/memory-controllers/samsung,exynos5422-dmc.yaml
F: drivers/memory/samsung/exynos5422-dmc.c
DME1737 HARDWARE MONITOR DRIVER
--
2.30.2
