The example was adapted in the following ways:
- make use of the now supported 'function' and 'color' properties
- remove pwm nodes, those are documented elsewhere
- align node names to new dt schema rules and dt recommendations
License was not explicitly set before. The license set now is
recommended by DT project.
Suggested-by: Jacek Anaszewski <jacek.anaszewski@xxxxxxxxx>
Signed-off-by: Alexander Dahl <post@xxxxxxxxxxx>
Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Reviewed-by: Rob Herring <robh@xxxxxxxxxx>
Cc: Peter Ujfalusi <peter.ujfalusi@xxxxxx>
Cc: Russell King <linux@xxxxxxxxxxxxxxx>
---
Notes:
NOTE: Due to license set/change this needs Acked-by or Signed-off-by from:
* Peter Ujfalusi
* Russell King
That was discussed already with Peter (original author), still waiting
for Acked-by though …
Changelog
---------
v6 -> v7:
* added Reviewed-by (Krzysztof Kozlowski)
* reworded commit message (suggested by Krzysztof)
* added Reviewed-by (Rob Herring)
v5 -> v6:
* removed pwm nodes from example (Rob)
* renamed led-controller node in example (Rob)
v4 -> v5:
* updated based on feedback by Rob Herring
* removed Acked-by
v3 -> v4:
* added Cc to original author of the binding
v2 -> v3:
* changed license identifier to recommended one
* added Acked-by
v2:
* added this patch to series (Suggested-by: Jacek Anaszewski)
.../devicetree/bindings/leds/leds-pwm.txt | 50 -------------
.../devicetree/bindings/leds/leds-pwm.yaml | 70 +++++++++++++++++++
2 files changed, 70 insertions(+), 50 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.txt
create mode 100644 Documentation/devicetree/bindings/leds/leds-pwm.yaml
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.txt b/Documentation/devicetree/bindings/leds/leds-pwm.txt
deleted file mode 100644
index 6c6583c35f2f..000000000000
--- a/Documentation/devicetree/bindings/leds/leds-pwm.txt
+++ /dev/null
@@ -1,50 +0,0 @@
-LED connected to PWM
-
-Required properties:
-- compatible : should be "pwm-leds".
-
-Each LED is represented as a sub-node of the pwm-leds device. Each
-node's name represents the name of the corresponding LED.
-
-LED sub-node properties:
-- pwms : PWM property to point to the PWM device (phandle)/port (id) and to
- specify the period time to be used: <&phandle id period_ns>;
-- pwm-names : (optional) Name to be used by the PWM subsystem for the PWM device
- For the pwms and pwm-names property please refer to:
- Documentation/devicetree/bindings/pwm/pwm.txt
-- max-brightness : Maximum brightness possible for the LED
-- active-low : (optional) For PWMs where the LED is wired to supply
- rather than ground.
-- label : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-- linux,default-trigger : (optional)
- see Documentation/devicetree/bindings/leds/common.txt
-
-Example:
-
-twl_pwm: pwm {
- /* provides two PWMs (id 0, 1 for PWM1 and PWM2) */
- compatible = "ti,twl6030-pwm";
- #pwm-cells = <2>;
-};
-
-twl_pwmled: pwmled {
- /* provides one PWM (id 0 for Charing indicator LED) */
- compatible = "ti,twl6030-pwmled";
- #pwm-cells = <2>;
-};
-
-pwmleds {
- compatible = "pwm-leds";
- kpad {
- label = "omap4::keypad";
- pwms = <&twl_pwm 0 7812500>;
- max-brightness = <127>;
- };
-
- charging {
- label = "omap4:green:chrg";
- pwms = <&twl_pwmled 0 7812500>;
- max-brightness = <255>;
- };
-};
diff --git a/Documentation/devicetree/bindings/leds/leds-pwm.yaml b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
new file mode 100644
index 000000000000..fe4d5fd25913
--- /dev/null
+++ b/Documentation/devicetree/bindings/leds/leds-pwm.yaml
@@ -0,0 +1,70 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/leds/leds-pwm.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: LEDs connected to PWM
+
+maintainers:
+ - Pavel Machek <pavel@xxxxxx>
+
+description:
+ Each LED is represented as a sub-node of the pwm-leds device. Each
+ node's name represents the name of the corresponding LED.
+
+properties:
+ compatible:
+ const: pwm-leds
+
+patternProperties:
+ "^led(-[0-9a-f]+)?$":
+ type: object
+
+ $ref: common.yaml#
+
+ properties:
+ pwms:
+ maxItems: 1
+
+ pwm-names: true
+
+ max-brightness:
+ description:
+ Maximum brightness possible for the LED
+ $ref: /schemas/types.yaml#/definitions/uint32
+
+ active-low:
+ description:
+ For PWMs where the LED is wired to supply rather than ground.
+ type: boolean
+
+ required:
+ - pwms
+ - max-brightness
+
+additionalProperties: false
+
+examples:
+ - |
+
+ #include <dt-bindings/leds/common.h>
+
+ led-controller {
+ compatible = "pwm-leds";
+
+ led-1 {
+ label = "omap4::keypad";
+ pwms = <&twl_pwm 0 7812500>;
+ max-brightness = <127>;
+ };
+
+ led-2 {
+ color = <LED_COLOR_ID_GREEN>;
+ function = LED_FUNCTION_CHARGING;
+ pwms = <&twl_pwmled 0 7812500>;
+ max-brightness = <255>;
+ };
+ };
+
+...
--
2.20.1
