Hi,
On 27/02/18 09:11, Andrzej Hajda wrote:
> These bindings allow to describe most known standard USB connectors
> and it should be possible to extend it if necessary.
> USB connectors, beside USB can be used to route other protocols,
> for example UART, Audio, MHL. In such case every device passing data
> through the connector should have appropriate graph bindings.
>
> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
> ---
> v4:
> - improved 'type' description (Rob),
> - improved description of 2nd example (Rob).
> v3:
> - removed MHL port (samsung connector will have separate bindings),
> - added 2nd example for USB-C,
> - improved formatting.
> v2:
> - moved connector type(A,B,C) to compatible string (Rob),
> - renamed size property to type (Rob),
> - changed type description to be less confusing (Laurent),
> - removed vendor specific compatibles (implied by graph port number),
> - added requirement of connector being a child of IC (Rob),
> - removed max-mode (subtly suggested by Rob, it should be detected anyway
> by USB Controller in runtime, downside is that device is not able to
> report its real capabilities, maybe better would be to make it optional(?)),
> - assigned port numbers to data buses (Rob).
>
> Regards
> Andrzej
> ---
> .../bindings/connector/usb-connector.txt | 75 ++++++++++++++++++++++
> 1 file changed, 75 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/connector/usb-connector.txt
>
> diff --git a/Documentation/devicetree/bindings/connector/usb-connector.txt b/Documentation/devicetree/bindings/connector/usb-connector.txt
> new file mode 100644
> index 000000000000..e1463f14af38
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/connector/usb-connector.txt
> @@ -0,0 +1,75 @@
> +USB Connector
> +=============
> +
> +USB connector node represents physical USB connector. It should be
> +a child of USB interface controller.
> +
> +Required properties:
> +- compatible: describes type of the connector, must be one of:
> + "usb-a-connector",
> + "usb-b-connector",
> + "usb-c-connector".
compatible should be just "usb-connector"
Type should be a property
type: type of usb connector "A", "B", "AB", "C"
AB is for dual-role connectors.
micro super-speed and high-speed connectors are different. How do you differentiate that?
> +
> +Optional properties:
> +- label: symbolic name for the connector,
Why do you need label? We can't maintain consistency as people will put creative names there.
Device/bus driver could generate a valid label.
> +- type: size of the connector, should be specified in case of USB-A, USB-B
> + non-fullsize connectors: "mini", "micro".
type is misleading. Type is usually A/B/C. It should be size here instead.
size: size of the connector if not standard size. "mini", "micro"
If not specified it is treated as standard sized connector.
e.g. for Type-C there is no mini/micro. so size doesn't have to be specificed
What about Type-C connector?
> +
> +Required nodes:
> +- any data bus to the connector should be modeled using the OF graph bindings
s/modeled/modelled
> + specified in bindings/graph.txt, unless the bus is between parent node and
> + the connector. Since single connector can have multpile data buses every bus
s/multpile/multiple
> + has assigned OF graph port number as follows:
> + 0: High Speed (HS), present in all connectors,
> + 1: Super Speed (SS), present in SS capable connectors,
> + 2: Sideband use (SBU), present in USB-C.
> +
> +Examples
> +--------
> +
> +1. Micro-USB connector with HS lines routed via controller (MUIC):
> +
> +muic-max77843@66 {
> + ...
> + usb_con: connector {
> + compatible = "usb-b-connector";
> + label = "micro-USB";
> + type = "micro";
> + };
> +};
> +
> +2. USB-C connector attached to CC controller (s2mm005), HS lines routed
> +to companion PMIC (max77865), SS lines to USB3 PHY and SBU to DisplayPort.
> +DisplayPort video lines are routed to the connector via SS mux in USB3 PHY.
> +
> +ccic: s2mm005@33 {
> + ...
> + usb_con: connector {
> + compatible = "usb-c-connector";
> + label = "USB-C";
The label is not consistent with the earlier example.
> +
> + ports {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + port@0 {
> + reg = <0>;
> + usb_con_hs: endpoint {
> + remote-endpoint = <&max77865_usbc_hs>;
> + };
> + };
> + port@1 {
> + reg = <1>;
> + usb_con_ss: endpoint {
> + remote-endpoint = <&usbdrd_phy_ss>;
> + };
> + };
> + port@2 {
> + reg = <2>;
> + usb_con_sbu: endpoint {
> + remote-endpoint = <&dp_aux>;
> + };
> + };
> + };
> + };
> +};
>
--
cheers,
-roger
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki. Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
