Hi Krzysztof ---
Excellent, thank you for all your help.
Mike
On Sun, Feb 4, 2018 at 8:26 AM, Krzysztof Kozlowski <krzk@xxxxxxxxxx> wrote:
> On Thu, Feb 01, 2018 at 01:16:56PM -0800, Michael Lyle wrote:
>> On the Artik520 module, there's a bcm4354 attached to mshc_1. Enable
>> it, and turn on the regulator used for it, so that both wifi & bluetooth
>> work.
>>
>> Verified to work on the Artik 520 evaluation board.
>>
>> v2: accidentally sent out v1
>> v3: non-removable instead of broken-cd, alphabetical order, formatting
>
> Changelog should go after --- separator so it would not end in commit.
>
> I'll fix it during applying. Looks good to me. I'll take it after merge
> window.
>
> Best regards,
> Krzysztof
>
>>
>> Signed-off-by: Michael Lyle <mlyle@xxxxxxxx>
>> ---
>> arch/arm/boot/dts/exynos3250-artik5.dtsi | 36 ++++++++++++++++++++++++++++++++
>> 1 file changed, 36 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/exynos3250-artik5.dtsi b/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> index 0aa577fe9f95..620b50c19ead 100644
>> --- a/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> +++ b/arch/arm/boot/dts/exynos3250-artik5.dtsi
>> @@ -245,6 +245,7 @@
>> regulator-name = "VLDO23_1.8V";
>> regulator-min-microvolt = <1800000>;
>> regulator-max-microvolt = <1800000>;
>> + regulator-always-on;
>> };
>>
>> ldo24_reg: LDO24 {
>> @@ -316,6 +317,41 @@
>> status = "okay";
>> };
>>
>> +&mshc_1 {
>> + cap-sd-highspeed;
>> + cap-sdio-irq;
>> + disable-wp;
>> + non-removable;
>> + keep-power-in-suspend;
>> + fifo-depth = <0x40>;
>> + vqmmc-supply = <&ldo11_reg>;
>> + /*
>> + * Voltage negotiation is broken for the SDIO periph so we
>> + * can't actually set the voltage here.
>> + * vmmc-supply = <&ldo23_reg>;
>> + */
>> + card-detect-delay = <500>;
>> + clock-frequency = <100000000>;
>> + max-frequency = <100000000>;
>> + samsung,dw-mshc-ciu-div = <3>;
>> + samsung,dw-mshc-sdr-timing = <0 1>;
>> + samsung,dw-mshc-ddr-timing = <1 2>;
>> + pinctrl-names = "default";
>> + pinctrl-0 = <&sd1_cmd &sd1_clk &sd1_bus1 &sd1_bus4 &wlanen>;
>> + bus-width = <4>;
>> + status = "okay";
>> +};
>> +
>> +&pinctrl_1 {
>> + wlanen: wlanen {
>> + samsung,pins = "gpx2-3";
>> + samsung,pin-function = <EXYNOS_PIN_FUNC_OUTPUT>;
>> + samsung,pin-pud = <EXYNOS_PIN_PULL_NONE>;
>> + samsung,pin-drv = <EXYNOS4_PIN_DRV_LV3>;
>> + samsung,pin-val = <1>;
>> + };
>> +};
>> +
>> &rtc {
>> clocks = <&cmu CLK_RTC>, <&s2mps14_osc S2MPS11_CLK_AP>;
>> clock-names = "rtc", "rtc_src";
>> --
>> 2.14.1
>>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
