Re: [PATCH 2/3] ARM: dts: exynos: Fix missing missing reg warning for syscon restart nodes

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Tue, Jan 16, 2018 at 10:31:28PM +0100, Krzysztof Kozlowski wrote:
> Fix DTC warnings like:
> 
>     arch/arm/boot/dts/exynos4412-trats2.dtb: Warning (simple_bus_reg):
>         Node /soc/syscon-poweroff missing or empty reg/ranges property
>     arch/arm/boot/dts/exynos4412-trats2.dtb: Warning (simple_bus_reg):
>         Node /soc/syscon-reboot missing or empty reg/ranges property
> 
> by moving the syscon poweroff and restart nodes into the PMU (Power
> Management Unit) node.  The PMU node is the actual block responsible for
> power management, including typical Exynos on/off/restart procedures.
> Therefore the syscon poweroff and restart nodes logically belong to it.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> 
> ---
> 
> Tested on Exynos5420 and Exynos4412. Other tests are welcomed.
> ---
>  .../devicetree/bindings/arm/samsung/pmu.txt        |  4 +++-
>  arch/arm/boot/dts/exynos-syscon-restart.dtsi       | 28 ++++++++++------------
>  arch/arm/boot/dts/exynos3250.dtsi                  |  4 ++--
>  arch/arm/boot/dts/exynos4.dtsi                     |  5 ++--
>  arch/arm/boot/dts/exynos4412.dtsi                  |  2 +-
>  arch/arm/boot/dts/exynos5.dtsi                     |  1 -
>  arch/arm/boot/dts/exynos5250.dtsi                  |  3 ++-
>  arch/arm/boot/dts/exynos5410.dtsi                  |  3 ++-
>  arch/arm/boot/dts/exynos5420.dtsi                  |  3 ++-
>  9 files changed, 27 insertions(+), 26 deletions(-)
> 
> diff --git a/Documentation/devicetree/bindings/arm/samsung/pmu.txt b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> index 779f5614bcee..405646655ec7 100644
> --- a/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> +++ b/Documentation/devicetree/bindings/arm/samsung/pmu.txt
> @@ -12,6 +12,8 @@ Properties:
>  		   - "samsung,exynos5433-pmu" - for Exynos5433 SoC.
>  		   - "samsung,exynos7-pmu" - for Exynos7 SoC.
>  		second value must be always "syscon".
> +		If PMU contains optional syscon-poweroff or syscon-restart nodes,
> +		then third value must be "simple-mfd".

I don't think this is right. simple-mfd is only for cases where the 
parent has no setup that the child nodes are dependent on. You need the 
regmap setup by the parent before the child can be enumerated. The 
correct thing to do here is add an of_platform_default_populate() call.

Rob
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux