On 12/31, Bryan O'Donoghue wrote: > On 30/12/17 16:36, Mikko Perttunen wrote: > >FWIW, we had this problem some years ago with the Tegra CPU clock > >- then it was determined that a simpler solution was to have the > >determine_rate callback support unsigned long rates - so clock > >drivers that need to return rates higher than 2^31 can instead > >implement the determine_rate callback. That is what's currently > >implemented. > > > >Mikko > > Granted we could work around it but, having both zero and less than > zero indicate error means you can't support larger than LONG_MAX > which is I think worth fixing. > Ok. But can you implement the determine_rate op instead of the round_rate op for your clk? It's not a work-around, it's the preferred solution. That would allow rates larger than 2^31 for the clk without pushing through a change to all the drivers to express zero as "error" and non-zero as the rounded rate. I'm not entirely opposed to this approach, because we probably don't care to pass the particular error value from a clk provider to a clk consumer about what the error is. It's actually what we proposed as the solution for clk_round_rate() to return values larger than LONG_MAX to consumers. But doing that consumer API change or this provider side change is going to require us to evaluate all the consumers of these clks to make sure they don't check for some error value that's less than zero. This series does half the work, by changing the provider side, while ignoring the consumer side and any potential fallout of the less than zero to zero return value change. -- Qualcomm Innovation Center, Inc. is a member of Code Aurora Forum, a Linux Foundation Collaborative Project -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |