From: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
Date: Sun, 22 Oct 2017 15:33:06 +0200
Adjust jump targets so that a bit of exception handling can be better
reused at the end of this function.
This issue was detected by using the Coccinelle software.
Signed-off-by: Markus Elfring <elfring@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/devfreq/exynos-bus.c | 21 ++++++++++-----------
1 file changed, 10 insertions(+), 11 deletions(-)
diff --git a/drivers/devfreq/exynos-bus.c b/drivers/devfreq/exynos-bus.c
index 49f68929e024..e38d456b2d7d 100644
--- a/drivers/devfreq/exynos-bus.c
+++ b/drivers/devfreq/exynos-bus.c
@@ -124,34 +124,33 @@ static int exynos_bus_target(struct device *dev, unsigned long *freq, u32 flags)
if (old_freq < new_freq) {
ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
- if (ret < 0) {
- dev_err(bus->dev, "failed to set voltage\n");
- goto out;
- }
+ if (ret < 0)
+ goto report_failure;
}
ret = clk_set_rate(bus->clk, new_freq);
if (ret < 0) {
dev_err(dev, "failed to change clock of bus\n");
clk_set_rate(bus->clk, old_freq);
- goto out;
+ goto unlock;
}
if (old_freq > new_freq) {
ret = regulator_set_voltage_tol(bus->regulator, new_volt, tol);
- if (ret < 0) {
- dev_err(bus->dev, "failed to set voltage\n");
- goto out;
- }
+ if (ret < 0)
+ goto report_failure;
}
bus->curr_freq = new_freq;
dev_dbg(dev, "Set the frequency of bus (%luHz -> %luHz, %luHz)\n",
old_freq, new_freq, clk_get_rate(bus->clk));
-out:
+unlock:
mutex_unlock(&bus->lock);
-
return ret;
+
+report_failure:
+ dev_err(bus->dev, "failed to set voltage\n");
+ goto unlock;
}
static int exynos_bus_get_dev_status(struct device *dev,
--
2.14.2
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
