2017년 10월 17일 17:04에 Andrzej Hajda 이(가) 쓴 글:
> On 17.10.2017 09:38, Inki Dae wrote:
>>
>> 2017년 09월 29일 19:05에 Andrzej Hajda 이(가) 쓴 글:
>>> MIXER in SoCs prior to Exynos5420 supports only 4 video modes:
>>> 720x480, 720x576, 1280x720, 1920x1080. Support for other modes
>>> can be enabled by manipulating timings of HDMI. To do it
>>> adjusted_mode should contain actual mode set on crtc.
>>> With this patch it is possible to enable 1024x768 and 1280x1024
>>> modes in MIXER.
>>>
>>> Suggested-by: Daniel Drake <drake@xxxxxxxxxxxx>
>>> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>>> Reviewed-by: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
>>> ---
>>> drivers/gpu/drm/exynos/exynos_hdmi.c | 15 +++++++++++++--
>>> 1 file changed, 13 insertions(+), 2 deletions(-)
>>>
>>> diff --git a/drivers/gpu/drm/exynos/exynos_hdmi.c b/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> index 7225b6521148..4b081f6cfdcb 100644
>>> --- a/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> +++ b/drivers/gpu/drm/exynos/exynos_hdmi.c
>>> @@ -1239,6 +1239,17 @@ static void hdmi_v13_mode_apply(struct hdmi_context *hdata)
>>> static void hdmi_v14_mode_apply(struct hdmi_context *hdata)
>>> {
>>> struct drm_display_mode *m = &hdata->encoder.crtc->state->mode;
>>> + struct drm_display_mode *am = &hdata->encoder.crtc->state->adjusted_mode;
>>> + int hquirk = 0;
>>> +
>>> + /*
>>> + * In case video mode coming from CRTC differs from requested one HDMI
>>> + * sometimes is able to almost properly perform conversion - only
>>> + * first line is distorted.
>>> + */
>>> + if ((m->vdisplay != am->vdisplay) &&
>>> + (m->hdisplay == 1280 || m->hdisplay == 1024))
>>> + hquirk = 258;
>> Andrzej,
>>
>> The distorted value couldn't be described logically? Just I wonder why the difference happens.
>
> Without low level documentation of the IP one could only guess what
> happens there.
> In case of 1024x768 one can reason as follows:
> - mixer sends image in format 1280x720, so it sends 1280 - 1024 = 256
> pixels too much, so if we trim it in HDMI by 256 it should display it
> correctly,
> - but another quirk few lines later suppress 2 pixels from
> hsync_(start,end), so to balance it we should add these pixels here, so
> finally we have 256 + 2 = 258.
>
> This explanation seems quite reasonable, except it does not work for
> 1280x1024 mode.
We aren't sure 100% but above comment would be helpful to other developers. So could you leave the comment?
Thanks,
Inki Dae
>
> Regards
> Andrzej
>
>>
>> Thanks,
>> Inki Dae
>>
>>>
>>> hdmi_reg_writev(hdata, HDMI_H_BLANK_0, 2, m->htotal - m->hdisplay);
>>> hdmi_reg_writev(hdata, HDMI_V_LINE_0, 2, m->vtotal);
>>> @@ -1332,8 +1343,8 @@ static void hdmi_v14_mode_apply(struct hdmi_context *hdata)
>>> hdmi_reg_writev(hdata, HDMI_V_SYNC_LINE_AFT_PXL_6_0, 2, 0xffff);
>>>
>>> hdmi_reg_writev(hdata, HDMI_TG_H_FSZ_L, 2, m->htotal);
>>> - hdmi_reg_writev(hdata, HDMI_TG_HACT_ST_L, 2, m->htotal - m->hdisplay);
>>> - hdmi_reg_writev(hdata, HDMI_TG_HACT_SZ_L, 2, m->hdisplay);
>>> + hdmi_reg_writev(hdata, HDMI_TG_HACT_ST_L, 2, m->htotal - m->hdisplay - hquirk);
>>> + hdmi_reg_writev(hdata, HDMI_TG_HACT_SZ_L, 2, m->hdisplay + hquirk);
>>> hdmi_reg_writev(hdata, HDMI_TG_V_FSZ_L, 2, m->vtotal);
>>> if (hdata->drv_data == &exynos5433_hdmi_driver_data)
>>> hdmi_reg_writeb(hdata, HDMI_TG_DECON_EN, 1);
>>>
>>
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
