Hi Marek,
On 2017년 09월 15일 18:41, Marek Szyprowski wrote:
> Commit 6edfa11cb396 ("clk: samsung: Add enable/disable operation for
> PLL36XX clocks") added enable/disable operations to PLL clocks. Prior that
> VPLL and EPPL clocks were always enabled because the enable bit was never
> touched. Those clocks have to be enabled during suspend/resume cycle,
> because otherwise board fails to enter sleep mode. This patch enables them
> unconditionally before entering system suspend state. System restore
> function will set them to the previous state saved in the register cache
> done before that unconditional enable.
>
> Fixes: 6edfa11cb396 ("clk: samsung: Add enable/disable operation for PLL36XX clocks")
> CC: stable@xxxxxxxxxxxxxxx # v4.13
> Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
> ---
> Changelog:
> v2:
> - wait until PLL is properly locked
> ---
> drivers/clk/samsung/clk-exynos4.c | 15 +++++++++++++++
> 1 file changed, 15 insertions(+)
>
> diff --git a/drivers/clk/samsung/clk-exynos4.c b/drivers/clk/samsung/clk-exynos4.c
> index e40b77583c47..d8d3cb67b402 100644
> --- a/drivers/clk/samsung/clk-exynos4.c
> +++ b/drivers/clk/samsung/clk-exynos4.c
> @@ -294,6 +294,18 @@ enum exynos4_plls {
> #define PLL_ENABLED (1 << 31)
> #define PLL_LOCKED (1 << 29)
>
> +static void exynos4_clk_enable_pll(u32 reg)
> +{
> + u32 pll_con = readl(reg_base + reg);
> + pll_con |= PLL_ENABLED;
> + writel(pll_con, reg_base + reg);
> +
> + while (!(pll_con & PLL_LOCKED)) {
> + cpu_relax();
> + pll_con = readl(reg_base + reg);
> + }
> +}
> +
> static void exynos4_clk_wait_for_pll(u32 reg)
> {
> u32 pll_con;
> @@ -315,6 +327,9 @@ static int exynos4_clk_suspend(void)
> samsung_clk_save(reg_base, exynos4_save_pll,
> ARRAY_SIZE(exynos4_clk_pll_regs));
>
> + exynos4_clk_enable_pll(EPLL_CON0);
> + exynos4_clk_enable_pll(VPLL_CON0);
> +
To support runtime pm for Exynos5433 on your patch[1],
You get the clock from device-tree and enable the clock
on the suspend function (exynos5433_cmu_suspend) as following:
[1] [PATCH v9 3/5] clk: samsung: exynos5433: Add support for runtime PM
- https://patchwork.kernel.org/patch/9911753/
------------
static int exynos5433_cmu_suspend(struct device *dev)
{
struct exynos5433_cmu_data *data = dev_get_drvdata(dev);
int i;
samsung_clk_save(data->ctx->reg_base, data->clk_save,
data->nr_clk_save);
for (i = 0; i < data->nr_pclks; i++)
clk_prepare_enable(data->pclks[i]);
samsung_clk_restore(data->ctx->reg_base, data->clk_suspend,
data->nr_clk_suspend);
return 0;
}
------------
IMHO, I think that you better to get the PLL clock from device-tree
instead of adding the duplicate code for enabling PLL(EPLL_CON0/VPLL_CON0).
But, Maybe many -EPROBE_DEFER happen on device driver
if using the 'platform_driver' method instead of CLK_OF_DECLARE macro.
I'm not sure what is more important on below:
- Remove the duplicate code
- Prevent the -EPROBE_DEFER
Anyway, I will follow Sylwester's opinion.
> if (exynos4_soc == EXYNOS4210) {
> samsung_clk_save(reg_base, exynos4_save_soc,
> ARRAY_SIZE(exynos4210_clk_save));
>
--
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
