GPIO keys don't need interrupt property. Interrupt number can be derived
directly from the GPIO pin definition, so remove redundant 'interrupts'
and 'interrupt-parent' properties from gpio-keys nodes.
Signed-off-by: Marek Szyprowski <m.szyprowski@xxxxxxxxxxx>
---
arch/arm/boot/dts/exynos4412-odroid-common.dtsi | 2 --
arch/arm/boot/dts/exynos4412-odroidx.dts | 2 --
2 files changed, 4 deletions(-)
diff --git a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
index 102acd78be15..ce20f30db268 100644
--- a/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/exynos4412-odroid-common.dtsi
@@ -31,8 +31,6 @@
pinctrl-0 = <&gpio_power_key>;
power_key {
- interrupt-parent = <&gpx1>;
- interrupts = <3 IRQ_TYPE_NONE>;
gpios = <&gpx1 3 GPIO_ACTIVE_LOW>;
linux,code = <KEY_POWER>;
label = "power key";
diff --git a/arch/arm/boot/dts/exynos4412-odroidx.dts b/arch/arm/boot/dts/exynos4412-odroidx.dts
index 97882267ef09..acf48a018e5e 100644
--- a/arch/arm/boot/dts/exynos4412-odroidx.dts
+++ b/arch/arm/boot/dts/exynos4412-odroidx.dts
@@ -43,8 +43,6 @@
pinctrl-0 = <&gpio_power_key &gpio_home_key>;
home_key {
- interrupt-parent = <&gpx2>;
- interrupts = <2 IRQ_TYPE_NONE>;
gpios = <&gpx2 2 GPIO_ACTIVE_HIGH>;
linux,code = <KEY_HOME>;
label = "home key";
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
