Re: [PATCH v2 1/2] drm/bridge: add Silicon Image SiI9234 driver

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Hi Maciej,

On Tuesday, 5 September 2017 16:01:54 EEST Maciej Purski wrote:
> Hi Laurent,
> 
> Thank you for your reply. The problem was already discussed when adding
> sil8620 driver. It can be solved later. I'm CC-ing Andrzej Hajda, as he
> used to discuss it with you.

I'm afraid it can't be solved later. DT bindings are supposed to be a stable 
ABI, we can't merge a binding that we already know isn't correct.

> https://patchwork.freedesktop.org/patch/114224/
> https://lists.freedesktop.org/archives/dri-devel/2015-December/096756.html
> 
> Regards,
> 
> 	Maciej
> 
> On 31/08/17 15:30, Laurent Pinchart wrote:
> > Hi Maciej,
> > 
> > Thank you for the patch.
> > 
> > On Thursday, 31 August 2017 15:27:13 EEST Maciej Purski wrote:
> >> SiI9234 transmitter converts eTMDS/HDMI signal to MHL 1.0.
> >> It is controlled via I2C bus. Its interaction with other
> >> devices in video pipeline is performed mainly on HW level.
> >> The only interaction it does on device driver level is
> >> filtering-out unsupported video modes, it exposes drm_bridge
> >> interface to perform this operation.
> >> 
> >> This patch is based on the code refactored by Tomasz Stanislawski
> >> <t.stanislaws@xxxxxxxxxxx>, which was initially developed by:
> >> Adam Hampson <ahampson@xxxxxxxxxxxxxxx>
> >> Erik Gilling <konkers@xxxxxxxxxxx>
> >> Shankar Bandal <shankar.b@xxxxxxxxxxx>
> >> Dharam Kumar <dharam.kr@xxxxxxxxxxx>
> >> 
> >> Signed-off-by: Maciej Purski <m.purski@xxxxxxxxxxx>
> >> ---
> >> Changes in v2:
> >> - use bulk_requlators instead of single one
> >> - substitute some of the magic values with macros
> >> - improve coding style
> >> - improved error handling in sii9234_probe()
> >> ---
> >> 
> >>   .../devicetree/bindings/display/bridge/sii9234.txt |  34 +
> >>   drivers/gpu/drm/bridge/Kconfig                     |   8 +
> >>   drivers/gpu/drm/bridge/Makefile                    |   1 +
> >>   drivers/gpu/drm/bridge/sii9234.c                   | 993
> >>   ++++++++++++++++++
> >>   4 files changed, 1036 insertions(+)
> >>   create mode 100644
> >> 
> >> Documentation/devicetree/bindings/display/bridge/sii9234.txt create mode
> >> 100644 drivers/gpu/drm/bridge/sii9234.c
> >> 
> >> diff --git a/Documentation/devicetree/bindings/display/bridge/sii9234.txt
> >> b/Documentation/devicetree/bindings/display/bridge/sii9234.txt new file
> >> mode 100644
> >> index 0000000..3ce7413
> >> --- /dev/null
> >> +++ b/Documentation/devicetree/bindings/display/bridge/sii9234.txt
> >> @@ -0,0 +1,34 @@
> >> +Silicon Image SiI9234 HDMI/MHL bridge bindings
> >> +
> >> +Required properties:
> >> +	- compatible : "sil,sii9234".
> >> +	- reg : I2C address for TPI interface, use 0x39
> >> +	- avcc33-supply : MHL/USB Switch Supply Voltage (3.3V)
> >> +	- iovcc18-supply : I/O Supply Voltage (1.8V)
> >> +	- avcc12-supply : TMDS Analog Supply Voltage (1.2V)
> >> +	- cvcc12-supply : Digital Core Supply Voltage (1.2V)
> >> +	- interrupts, interrupt-parent: interrupt specifier of INT pin
> >> +	- reset-gpios: gpio specifier of RESET pin (active low)
> >> +	- video interfaces: Device node can contain video interface port
> >> +			    node for HDMI encoder according to [1].
> >> +
> >> +[1]: Documentation/devicetree/bindings/media/video-interfaces.txt
> > 
> > Doesn't this chip have two ports, one input connected to the SoC and one
> > output connected to an HDMI connector ? If so there should be two ports in
> > DT too.
> > 
> >> +Example:
> >> +	sii9234@39 {
> >> +		compatible = "sil,sii9234";
> >> +		reg = <0x39>;
> >> +		avcc33-supply = <&vcc33mhl>;
> >> +		iovcc18-supply = <&vcc18mhl>;
> >> +		avcc12-supply = <&vsil12>;
> >> +		cvcc12-supply = <&vsil12>;
> >> +		reset-gpios = <&gpf3 4 GPIO_ACTIVE_LOW>;
> >> +		interrupt-parent = <&gpf3>;
> >> +		interrupts = <5 IRQ_TYPE_LEVEL_HIGH>;
> >> +
> >> +		port {
> >> +			mhl_to_hdmi: endpoint {
> >> +				remote-endpoint = <&hdmi_to_mhl>;
> > 
> > It would be useful to include the remote DT nodes in the example too.
> > 
> >> +			};
> >> +		};
> >> +	};


-- 
Regards,

Laurent Pinchart

--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux