Tobias Jakobi wrote:
> Hello Andrzej,
>
>
> Andrzej Hajda wrote:
>> Linux core provide helpers for polling with timeout, lets use them.
>>
>> Signed-off-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
>> ---
>> drivers/gpu/drm/exynos/exynos5433_drm_decon.c | 20 ++++++++------------
>> 1 file changed, 8 insertions(+), 12 deletions(-)
>>
>> diff --git a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
>> index 5792ca88..237b4c9 100644
>> --- a/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
>> +++ b/drivers/gpu/drm/exynos/exynos5433_drm_decon.c
>> @@ -13,6 +13,7 @@
>> #include <linux/platform_device.h>
>> #include <linux/clk.h>
>> #include <linux/component.h>
>> +#include <linux/iopoll.h>
>> #include <linux/mfd/syscon.h>
>> #include <linux/of_device.h>
>> #include <linux/of_gpio.h>
>> @@ -407,24 +408,19 @@ static void decon_atomic_flush(struct exynos_drm_crtc *crtc)
>>
>> static void decon_swreset(struct decon_context *ctx)
>> {
>> - unsigned int tries;
>> unsigned long flags;
>> + u32 val;
>> + int ret;
>>
>> writel(0, ctx->addr + DECON_VIDCON0);
>> - for (tries = 2000; tries; --tries) {
>> - if (~readl(ctx->addr + DECON_VIDCON0) & VIDCON0_STOP_STATUS)
>> - break;
>> - udelay(10);
>> - }
>> + readl_poll_timeout(ctx->addr + DECON_VIDCON0, val,
>> + ~val & VIDCON0_STOP_STATUS, 12, 20000);
> Wouldn't it be more consistent to also check for a timeout here?
I see! Thanks for the clarification.
- Tobias
> With best wishes,
> Tobias
>
>
>
>> writel(VIDCON0_SWRESET, ctx->addr + DECON_VIDCON0);
>> - for (tries = 2000; tries; --tries) {
>> - if (~readl(ctx->addr + DECON_VIDCON0) & VIDCON0_SWRESET)
>> - break;
>> - udelay(10);
>> - }
>> + ret = readl_poll_timeout(ctx->addr + DECON_VIDCON0, val,
>> + ~val & VIDCON0_SWRESET, 12, 20000);
>>
>> - WARN(tries == 0, "failed to software reset DECON\n");
>> + WARN(ret < 0, "failed to software reset DECON\n");
>>
>> spin_lock_irqsave(&ctx->vblank_lock, flags);
>> ctx->frame_id = 0;
>>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
