Hi All, I have some issue on performance on USB 3.0 on Odroid XU4. some inconsistency on heavy read/write issue on hdd / ssd. with intermediated failure in hub reset, with no kernel panic. Jul 31 00:04:52 odroid kernel: usb 4-1.1: reset SuperSpeed USB device number 3 using xhci-hcd Jul 31 00:04:53 odroid kernel: usb 4-1.1: reset SuperSpeed USB device number 3 using xhci-hcd Jul 31 00:04:55 odroid kernel: usb 4-1.1: reset SuperSpeed USB device number 3 using xhci-hcd So I just wonder if this could be related to usb 3.0 clk. So the cross check check the ck_summary of HK 3.10.x and mainline 4.13.x ck_summary HK 3.10.x https://pastebin.com/qGGHj1t6 mout_usbdrd300 3 3 24000000 dout_usbdrd300 2 2 24000000 sclk_usbdrd300 1 1 24000000 dout_usbphy300 2 2 24000000 sclk_usbphy300 1 1 24000000 mout_usbdrd301 3 3 24000000 dout_usbdrd301 2 2 24000000 sclk_usbdrd301 1 1 24000000 dout_usbphy301 2 2 24000000 sclk_usbphy301 1 1 24000000 clk_summary mainline 4.13.x https://pastebin.com/i7ij29Sm mout_usbd300 1 1 24000000 0 0 dout_usbd300 0 0 24000000 0 0 sclk_usbd300 0 0 24000000 0 0 dout_usbphy300 1 1 24000000 0 0 sclk_usbphy300 4 4 24000000 0 0 mout_usbd301 1 1 24000000 0 0 dout_usbd301 0 0 24000000 0 0 sclk_usbd301 0 0 24000000 0 0 dout_usbphy301 1 1 24000000 0 0 sclk_usbphy301 3 3 24000000 0 0 So their seem to be some difference in the clk count on usb 3.0. could this be related to the above behavior. Form the schematic of Odroid XU4 it seem to have USB_CLK to control usb. usb clk to but could not find any link in the exynos5420 clk code. Odroid XU4 has USB HUB GL852G-OHG controller. possible datasheet of hub controller http://minipcsale.ru/images/Minix-Neo-X8-h/GL852G.pdf How can we control the vbus power of the usb 3.0 ports ? XUSB30OVERCUR_U2/ETC5_0 XUSB30OVERCUR_U3/ETC5_1 XUSB30VBUSCTRL_U2/ETC5_2 XUSB30VBUSCTRL_U3/ETC5_3 I have also tried to setup vbu/vbus-boost via dts but no success. I have also tried to enable power-domain fsys for usb device but it's say unsupported setting. If you could share some inputs it would be useful in debug and enhance the code. Best Regards -Anand -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |