On 06/14/2017 03:18 PM, Krzysztof Kozlowski wrote:
> When setting the pin function for external interrupts, the driver used
> wrong IO memory address base. The pin function register is always under
> pctl_base, not the eint_base.
>
> By updating wrong register, the external interrupts for chosen GPIO
> would not work at all and some other GPIO might be configured to wrong
> value.
>
> Platforms other than Exynos5433 should not be affected as eint_base
> equals pctl_base in such case.
>
> Fixes: 8b1bd11c1f8f ("pinctrl: samsung: Add the support the multiple
> IORESOURCE_MEM for one pin-bank")
> Cc:<stable@xxxxxxxxxxxxxxx>
> Reported-by: Tomasz Figa<tomasz.figa@xxxxxxxxx>
> Signed-off-by: Krzysztof Kozlowski<krzk@xxxxxxxxxx>
I've tested this patch by comparing GPFx_CON register values, as
nothing seems to be currently using pins from the GPF1...GPF5 banks
as external interrupts on TM2, the only board based on Exynos5433.
I changed sii8620 interrupt-parent temporarily to &gpf1 and GPF1_CON
got configured properly with the patch and improperly without
the patch. I guess this can be considered as
Tested-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
--
Thanks,
Sylwester
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
