Hi Sylwester,
Looks good to me.
Reviewed-by: Chanwoo Choi <cw00.choi@xxxxxxxxxxx>
2017-06-09 19:38 GMT+09:00 Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>:
> A specific clock rate table is added for EPLL so it is possible
> to set frequency of the EPLL output clock as multiple of various
> audio sampling rates.
>
> Reviewed-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> ---
> Changes since v1:
> - fixed coefficient for 400 MHZ rate
> - dropped 45158400 Hz rate entry
> ---
> drivers/clk/samsung/clk-exynos5420.c | 19 +++++++++++++++++--
> 1 file changed, 17 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-exynos5420.c b/drivers/clk/samsung/clk-exynos5420.c
> index 6f1d6c0..0748a0b 100644
> --- a/drivers/clk/samsung/clk-exynos5420.c
> +++ b/drivers/clk/samsung/clk-exynos5420.c
> @@ -1280,6 +1280,21 @@ static void __init exynos5420_clk_sleep_init(void) {}
> PLL_35XX_RATE(200000000, 200, 3, 3),
> };
>
> +static const struct samsung_pll_rate_table exynos5420_epll_24mhz_tbl[] = {
> + PLL_36XX_RATE(600000000U, 100, 2, 1, 0),
> + PLL_36XX_RATE(400000000U, 200, 3, 2, 0),
> + PLL_36XX_RATE(393216000U, 197, 3, 2, 25690),
> + PLL_36XX_RATE(361267200U, 301, 5, 2, 3671),
> + PLL_36XX_RATE(200000000U, 200, 3, 3, 0),
> + PLL_36XX_RATE(196608000U, 197, 3, 3, -25690),
> + PLL_36XX_RATE(180633600U, 301, 5, 3, 3671),
> + PLL_36XX_RATE(131072000U, 131, 3, 3, 4719),
> + PLL_36XX_RATE(100000000U, 200, 3, 4, 0),
> + PLL_36XX_RATE(65536000U, 131, 3, 4, 4719),
> + PLL_36XX_RATE(49152000U, 197, 3, 5, 25690),
> + PLL_36XX_RATE(32768000U, 131, 3, 5, 4719),
> +};
> +
> static struct samsung_pll_clock exynos5x_plls[nr_plls] __initdata = {
> [apll] = PLL(pll_2550, CLK_FOUT_APLL, "fout_apll", "fin_pll", APLL_LOCK,
> APLL_CON0, NULL),
> @@ -1287,7 +1302,7 @@ static void __init exynos5420_clk_sleep_init(void) {}
> CPLL_CON0, NULL),
> [dpll] = PLL(pll_2550, CLK_FOUT_DPLL, "fout_dpll", "fin_pll", DPLL_LOCK,
> DPLL_CON0, NULL),
> - [epll] = PLL(pll_2650, CLK_FOUT_EPLL, "fout_epll", "fin_pll", EPLL_LOCK,
> + [epll] = PLL(pll_36xx, CLK_FOUT_EPLL, "fout_epll", "fin_pll", EPLL_LOCK,
> EPLL_CON0, NULL),
> [rpll] = PLL(pll_2650, CLK_FOUT_RPLL, "fout_rpll", "fin_pll", RPLL_LOCK,
> RPLL_CON0, NULL),
> @@ -1402,7 +1417,7 @@ static void __init exynos5x_clk_init(struct device_node *np,
>
> if (_get_rate("fin_pll") == 24 * MHZ) {
> exynos5x_plls[apll].rate_table = exynos5420_pll2550x_24mhz_tbl;
> - exynos5x_plls[epll].rate_table = exynos5420_pll2550x_24mhz_tbl;
> + exynos5x_plls[epll].rate_table = exynos5420_epll_24mhz_tbl;
> exynos5x_plls[kpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
> exynos5x_plls[bpll].rate_table = exynos5420_pll2550x_24mhz_tbl;
> }
> --
> 1.9.1
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
--
Best Regards,
Chanwoo Choi
Samsung Electronics
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
