On Fri, Apr 21, 2017 at 07:19:49PM +0200, Sylwester Nawrocki wrote:
> This patch adds DT binding documentation for Odroid XU3/4
> sound subsystem.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> ---
> .../devicetree/bindings/sound/samsung,odroid.txt | 57 ++++++++++++++++++++++
> 1 file changed, 57 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/sound/samsung,odroid.txt
>
> diff --git a/Documentation/devicetree/bindings/sound/samsung,odroid.txt b/Documentation/devicetree/bindings/sound/samsung,odroid.txt
> new file mode 100644
> index 0000000..c1ac70c
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/sound/samsung,odroid.txt
> @@ -0,0 +1,57 @@
> +Samsung Exynos Odroid XU3/XU4 audio complex with MAX98090 codec
> +
> +Required properties:
> +
> + - compatible - "samsung,odroidxu3-audio" - for Odroid XU3 board,
> + "samsung,odroidxu4-audio" - for Odroid XU4 board
> + - model - the user-visible name of this sound complex
ASoC will support "label" soon (see graph support). Use that instead.
> + - 'cpu' subnode with a 'sound-dai' property containing the phandle of the I2S
> + controller
> + - 'codec' subnode with a 'sound-dai' property containing list of phandles
> + to the CODEC nodes, first entry must be corresponding to the MAX98090
> + CODEC and the second entry must be the phandle of the HDMI IP block node
These are not properties, so move them to a sub-node section.
> + - clocks - should contain entries matching clock names in the clock-names
> + property
> + - clock-names - should contain following entries:
> + - "epll" - indicating the EPLL output clock
> + - "i2s_rclk" - indicating the RCLK (root) clock of the I2S0 controller
At least the 2nd one should be in the i2s node. This node isn't really a
h/w block, so it shouldn't have clocks IMO.
> + - samsung,audio-widgets - this property specifies off-codec audio elements
> + like headphones or speakers, for details see widgets.txt
> + - samsung,audio-routing - a list of the connections between audio
> + components; each entry is a pair of strings, the first being the
> + connection's sink, the second being the connection's source;
> + valid names for sources and sinks are the MAX98090's pins (as
> + documented in its binding), and the jacks on the board
> +
> + For Odroid X2:
> + "Headphone Jack", "Mic Jack", "DMIC"
> +
> + For Odroid U3, XU3:
> + "Headphone Jack", "Speakers"
> +
> + For Odroid XU4:
> + no entries
> +
> +Example:
> +
> +sound {
> + compatible = "samsung,odroidxu3-audio";
> + samsung,cpu-dai = <&i2s0>;
> + samsung,codec-dai = <&max98090>;
Not documented. Nor needed?
> + model = "Odroid-XU3";
> + samsung,audio-routing =
> + "Headphone Jack", "HPL",
> + "Headphone Jack", "HPR",
> + "IN1", "Mic Jack",
> + "Mic Jack", "MICBIAS";
> +
> + clocks = <&clock CLK_FOUT_EPLL>, <&i2s0 CLK_I2S_RCLK_SRC>;
> + clock-names = "epll", "sclk_i2s";
> +
> + cpu {
> + sound-dai = <&i2s0 0>;
> + };
> + codec {
> + sound-dai = <&hdmi>, <&max98090>;
> + };
> +};
> --
> 1.9.1
>
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
