On Fri, Apr 21, 2017 at 07:19:45PM +0200, Sylwester Nawrocki wrote:
> The existing enable/disable ops for PLL35XX are made more generic
> and used also for PLL36XX. This fixes issues in the kernel with
> PLL36XX PLLs when the PLL has not been already enabled by bootloader.
>
> Signed-off-by: Sylwester Nawrocki <s.nawrocki@xxxxxxxxxxx>
> ---
> drivers/clk/samsung/clk-pll.c | 85 +++++++++++++++++++++++++------------------
> 1 file changed, 49 insertions(+), 36 deletions(-)
>
> diff --git a/drivers/clk/samsung/clk-pll.c b/drivers/clk/samsung/clk-pll.c
> index 5229089..10c76eb 100644
> --- a/drivers/clk/samsung/clk-pll.c
> +++ b/drivers/clk/samsung/clk-pll.c
> @@ -23,6 +23,10 @@ struct samsung_clk_pll {
> struct clk_hw hw;
> void __iomem *lock_reg;
> void __iomem *con_reg;
> + /* PLL enable control bit offset in @con_reg register */
> + unsigned short enable_offs;
> + /* PLL lock status bit offset in @con_reg register */
> + unsigned short lock_offs;
> enum samsung_pll_type type;
> unsigned int rate_count;
> const struct samsung_pll_rate_table *rate_table;
> @@ -61,6 +65,34 @@ static long samsung_pll_round_rate(struct clk_hw *hw,
> return rate_table[i - 1].rate;
> }
>
> +static int samsung_pll3xxx_enable(struct clk_hw *hw)
> +{
> + struct samsung_clk_pll *pll = to_clk_pll(hw);
> + u32 tmp;
> +
> + tmp = readl_relaxed(pll->con_reg);
> + tmp |= BIT(pll->enable_offs);
> + writel_relaxed(tmp, pll->con_reg);
> +
> + /* wait lock time */
> + do {
> + cpu_relax();
> + tmp = readl_relaxed(pll->con_reg);
> + } while (!(tmp & BIT(pll->lock_offs)));
> +
> + return 0;
> +}
> +
> +static void samsung_pll3xxx_disable(struct clk_hw *hw)
> +{
> + struct samsung_clk_pll *pll = to_clk_pll(hw);
> + u32 tmp;
> +
> + tmp = readl_relaxed(pll->con_reg);
> + tmp |= BIT(pll->enable_offs);
I think you meant here:
tmp &= ~BIT()
> + writel_relaxed(tmp, pll->con_reg);
> +}
> +
> /*
> * PLL2126 Clock Type
> */
> @@ -142,34 +174,6 @@ static unsigned long samsung_pll3000_recalc_rate(struct clk_hw *hw,
> #define PLL35XX_LOCK_STAT_SHIFT (29)
> #define PLL35XX_ENABLE_SHIFT (31)
>
> -static int samsung_pll35xx_enable(struct clk_hw *hw)
> -{
> - struct samsung_clk_pll *pll = to_clk_pll(hw);
> - u32 tmp;
> -
> - tmp = readl_relaxed(pll->con_reg);
> - tmp |= BIT(PLL35XX_ENABLE_SHIFT);
> - writel_relaxed(tmp, pll->con_reg);
> -
> - /* wait_lock_time */
> - do {
> - cpu_relax();
> - tmp = readl_relaxed(pll->con_reg);
> - } while (!(tmp & BIT(PLL35XX_LOCK_STAT_SHIFT)));
> -
> - return 0;
> -}
> -
> -static void samsung_pll35xx_disable(struct clk_hw *hw)
> -{
> - struct samsung_clk_pll *pll = to_clk_pll(hw);
> - u32 tmp;
> -
> - tmp = readl_relaxed(pll->con_reg);
> - tmp &= ~BIT(PLL35XX_ENABLE_SHIFT);
> - writel_relaxed(tmp, pll->con_reg);
> -}
> -
> static unsigned long samsung_pll35xx_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> {
> @@ -239,11 +243,11 @@ static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate,
> writel_relaxed(tmp, pll->con_reg);
>
> /* wait_lock_time if enabled */
> - if (tmp & BIT(PLL35XX_ENABLE_SHIFT)) {
> + if (tmp & BIT(pll->enable_offs)) {
> do {
> cpu_relax();
> tmp = readl_relaxed(pll->con_reg);
> - } while (!(tmp & BIT(PLL35XX_LOCK_STAT_SHIFT)));
> + } while (!(tmp & BIT(pll->lock_offs)));
> }
> return 0;
> }
> @@ -252,8 +256,8 @@ static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate,
> .recalc_rate = samsung_pll35xx_recalc_rate,
> .round_rate = samsung_pll_round_rate,
> .set_rate = samsung_pll35xx_set_rate,
> - .enable = samsung_pll35xx_enable,
> - .disable = samsung_pll35xx_disable,
> + .enable = samsung_pll3xxx_enable,
> + .disable = samsung_pll3xxx_disable,
> };
>
> static const struct clk_ops samsung_pll35xx_clk_min_ops = {
> @@ -275,6 +279,7 @@ static int samsung_pll35xx_set_rate(struct clk_hw *hw, unsigned long drate,
> #define PLL36XX_SDIV_SHIFT (0)
> #define PLL36XX_KDIV_SHIFT (0)
> #define PLL36XX_LOCK_STAT_SHIFT (29)
> +#define PLL36XX_ENABLE_SHIFT (31)
>
> static unsigned long samsung_pll36xx_recalc_rate(struct clk_hw *hw,
> unsigned long parent_rate)
> @@ -354,10 +359,12 @@ static int samsung_pll36xx_set_rate(struct clk_hw *hw, unsigned long drate,
> writel_relaxed(pll_con1, pll->con_reg + 4);
>
> /* wait_lock_time */
> - do {
> - cpu_relax();
> - tmp = readl_relaxed(pll->con_reg);
> - } while (!(tmp & (1 << PLL36XX_LOCK_STAT_SHIFT)));
> + if (pll_con0 & BIT(pll->enable_offs)) {
Why this additional if() is needed?
> + do {
> + cpu_relax();
> + tmp = readl_relaxed(pll->con_reg);
> + } while (!(tmp & BIT(PLL36XX_LOCK_STAT_SHIFT)));
To be consistent:
BIT(pll->lock_offs)?
Best regards,
Krzysztof
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
