On 04/18/2017 03:00 PM, Andrzej Hajda wrote:
On 17.04.2017 08:02, Hoegeun Kwon wrote:
This patch add the panel device tree node for s6e3hf2 display
controller to TM2e dts.
Signed-off-by: Hoegeun Kwon <hoegeun.kwon@xxxxxxxxxxx>
Maybe it would be good to remove te-gpios property - tm2/tm2e uses
hardware trigger, so it is not necessary and generates useless interrupts.
Thanks for your review.
I agree, but I thinks remove the te-gpio property after your patch [1]
has been merged.
[1] https://patchwork.kernel.org/patch/9625383/
Best regards,
Hoegeun
Beside this:
Reviewed-by: Andrzej Hajda <a.hajda@xxxxxxxxxxx>
--
Regards
Andrzej
---
arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts | 12 ++++++++++++
1 file changed, 12 insertions(+)
diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
index 694717a..98ad094 100644
--- a/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
+++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2e.dts
@@ -52,6 +52,18 @@
assigned-clock-rates = <278000000>, <400000000>;
};
+&dsi {
+ panel@0 {
+ compatible = "samsung,s6e3hf2";
+ reg = <0>;
+ vdd3-supply = <&ldo27_reg>;
+ vci-supply = <&ldo28_reg>;
+ reset-gpios = <&gpg0 0 GPIO_ACTIVE_LOW>;
+ enable-gpios = <&gpf1 5 GPIO_ACTIVE_HIGH>;
+ te-gpios = <&gpf1 3 GPIO_ACTIVE_HIGH>;
+ };
+};
+
&ldo31_reg {
regulator-name = "TSP_VDD_1.8V_AP";
regulator-min-microvolt = <1800000>;
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
