Re: [PATCH v3 5/5] phy: exynos: Use one define for enable bit

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On Sat, 11 Mar 2017, Krzysztof Kozlowski wrote:

> There is no need for separate defines for Exynos4 and Exynos5 phy enable
> bit and MIPI phy reset bits.  In both cases there are the same so
> simplify it.
> 
> This reduces number of defines and allows removal of one header file.
> 
> Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
> Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>
> ---
>  drivers/phy/phy-exynos-dp-video.c           |  5 ++--
>  drivers/phy/phy-exynos-mipi-video.c         | 39 ++++++++++++++---------------
>  drivers/phy/phy-exynos5-usbdrd.c            |  5 ++--

>  include/linux/mfd/syscon/exynos5-pmu.h      | 22 ----------------

My kind of diffstat:

Acked-by: Lee Jones <lee.jones@xxxxxxxxxx>

>  include/linux/soc/samsung/exynos-regs-pmu.h |  3 ++-
>  5 files changed, 25 insertions(+), 49 deletions(-)
>  delete mode 100644 include/linux/mfd/syscon/exynos5-pmu.h
> 
> diff --git a/drivers/phy/phy-exynos-dp-video.c b/drivers/phy/phy-exynos-dp-video.c
> index d72193188980..bb3279dbf88c 100644
> --- a/drivers/phy/phy-exynos-dp-video.c
> +++ b/drivers/phy/phy-exynos-dp-video.c
> @@ -14,7 +14,6 @@
>  #include <linux/kernel.h>
>  #include <linux/module.h>
>  #include <linux/mfd/syscon.h>
> -#include <linux/mfd/syscon/exynos5-pmu.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
>  #include <linux/phy/phy.h>
> @@ -37,7 +36,7 @@ static int exynos_dp_video_phy_power_on(struct phy *phy)
>  
>  	/* Disable power isolation on DP-PHY */
>  	return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
> -				  EXYNOS5_PHY_ENABLE, EXYNOS5_PHY_ENABLE);
> +				  EXYNOS4_PHY_ENABLE, EXYNOS4_PHY_ENABLE);
>  }
>  
>  static int exynos_dp_video_phy_power_off(struct phy *phy)
> @@ -46,7 +45,7 @@ static int exynos_dp_video_phy_power_off(struct phy *phy)
>  
>  	/* Enable power isolation on DP-PHY */
>  	return regmap_update_bits(state->regs, state->drvdata->phy_ctrl_offset,
> -				  EXYNOS5_PHY_ENABLE, 0);
> +				  EXYNOS4_PHY_ENABLE, 0);
>  }
>  
>  static const struct phy_ops exynos_dp_video_phy_ops = {
> diff --git a/drivers/phy/phy-exynos-mipi-video.c b/drivers/phy/phy-exynos-mipi-video.c
> index acef1d92691e..c198886f80a3 100644
> --- a/drivers/phy/phy-exynos-mipi-video.c
> +++ b/drivers/phy/phy-exynos-mipi-video.c
> @@ -12,7 +12,6 @@
>  #include <linux/err.h>
>  #include <linux/io.h>
>  #include <linux/kernel.h>
> -#include <linux/mfd/syscon/exynos5-pmu.h>
>  #include <linux/module.h>
>  #include <linux/of.h>
>  #include <linux/of_address.h>
> @@ -64,7 +63,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
>  		{
>  			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
> -			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
>  			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
> @@ -73,7 +72,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
> -			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
>  			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
> @@ -82,7 +81,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
> -			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
>  			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
> @@ -91,7 +90,7 @@ static const struct mipi_phy_device_desc s5pv210_mipi_phy = {
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
> -			.enable_val = EXYNOS4_MIPI_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
>  			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
> @@ -109,46 +108,46 @@ static const struct mipi_phy_device_desc exynos5420_mipi_phy = {
>  		{
>  			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
> -			.enable_val = EXYNOS5_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
> -			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
> +			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
>  			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
>  			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
> -			.enable_val = EXYNOS5_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
> -			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
> +			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
>  			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(0),
>  			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM1,
> -			.enable_val = EXYNOS5_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
> -			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
> +			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
>  			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
>  			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS1,
> -			.enable_val = EXYNOS5_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
> -			.resetn_val = EXYNOS5_MIPI_PHY_M_RESETN,
> +			.resetn_val = EXYNOS4_MIPI_PHY_MRESETN,
>  			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(1),
>  			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
> -			.enable_val = EXYNOS5_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
> -			.resetn_val = EXYNOS5_MIPI_PHY_S_RESETN,
> +			.resetn_val = EXYNOS4_MIPI_PHY_SRESETN,
>  			.resetn_reg = EXYNOS5420_MIPI_PHY_CONTROL(2),
>  			.resetn_map = EXYNOS_MIPI_REGMAP_PMU,
>  		},
> @@ -172,7 +171,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
>  		{
>  			/* EXYNOS_MIPI_PHY_ID_CSIS0 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_DSIM0,
> -			.enable_val = EXYNOS5_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
>  			.resetn_val = BIT(0),
> @@ -181,7 +180,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_DSIM0 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_CSIS0,
> -			.enable_val = EXYNOS5_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(0),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
>  			.resetn_val = BIT(0),
> @@ -190,7 +189,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_CSIS1 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
> -			.enable_val = EXYNOS5_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
>  			.resetn_val = BIT(1),
> @@ -199,7 +198,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_DSIM1 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
> -			.enable_val = EXYNOS5_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(1),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
>  			.resetn_val = BIT(1),
> @@ -208,7 +207,7 @@ static const struct mipi_phy_device_desc exynos5433_mipi_phy = {
>  		}, {
>  			/* EXYNOS_MIPI_PHY_ID_CSIS2 */
>  			.coupled_phy_id = EXYNOS_MIPI_PHY_ID_NONE,
> -			.enable_val = EXYNOS5_PHY_ENABLE,
> +			.enable_val = EXYNOS4_PHY_ENABLE,
>  			.enable_reg = EXYNOS4_MIPI_PHY_CONTROL(2),
>  			.enable_map = EXYNOS_MIPI_REGMAP_PMU,
>  			.resetn_val = BIT(0),
> diff --git a/drivers/phy/phy-exynos5-usbdrd.c b/drivers/phy/phy-exynos5-usbdrd.c
> index 7c896d0cda18..7c41daa2c625 100644
> --- a/drivers/phy/phy-exynos5-usbdrd.c
> +++ b/drivers/phy/phy-exynos5-usbdrd.c
> @@ -22,7 +22,6 @@
>  #include <linux/platform_device.h>
>  #include <linux/mutex.h>
>  #include <linux/mfd/syscon.h>
> -#include <linux/mfd/syscon/exynos5-pmu.h>
>  #include <linux/regmap.h>
>  #include <linux/regulator/consumer.h>
>  #include <linux/soc/samsung/exynos-regs-pmu.h>
> @@ -236,10 +235,10 @@ static void exynos5_usbdrd_phy_isol(struct phy_usb_instance *inst,
>  	if (!inst->reg_pmu)
>  		return;
>  
> -	val = on ? 0 : EXYNOS5_PHY_ENABLE;
> +	val = on ? 0 : EXYNOS4_PHY_ENABLE;
>  
>  	regmap_update_bits(inst->reg_pmu, inst->pmu_offset,
> -			   EXYNOS5_PHY_ENABLE, val);
> +			   EXYNOS4_PHY_ENABLE, val);
>  }
>  
>  /*
> diff --git a/include/linux/mfd/syscon/exynos5-pmu.h b/include/linux/mfd/syscon/exynos5-pmu.h
> deleted file mode 100644
> index 0a4ddabc395e..000000000000
> --- a/include/linux/mfd/syscon/exynos5-pmu.h
> +++ /dev/null
> @@ -1,22 +0,0 @@
> -/*
> - * Exynos5 SoC series Power Management Unit (PMU) register offsets
> - * and bit definitions.
> - *
> - * Copyright (C) 2014 Samsung Electronics Co., Ltd.
> - *
> - * This program is free software; you can redistribute it and/or modify
> - * it under the terms of the GNU General Public License version 2 as
> - * published by the Free Software Foundation.
> - */
> -
> -#ifndef _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_
> -#define _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_
> -
> -#define EXYNOS5_PHY_ENABLE			BIT(0)
> -#define EXYNOS5_MIPI_PHY_S_RESETN		BIT(1)
> -#define EXYNOS5_MIPI_PHY_M_RESETN		BIT(2)
> -
> -#define EXYNOS5433_PAD_RETENTION_AUD_OPTION		(0x3028)
> -#define EXYNOS5433_PAD_INITIATE_WAKEUP_FROM_LOWPWR	BIT(28)
> -
> -#endif /* _LINUX_MFD_SYSCON_PMU_EXYNOS5_H_ */
> diff --git a/include/linux/soc/samsung/exynos-regs-pmu.h b/include/linux/soc/samsung/exynos-regs-pmu.h
> index c261ed927e1e..bebdde5dccd6 100644
> --- a/include/linux/soc/samsung/exynos-regs-pmu.h
> +++ b/include/linux/soc/samsung/exynos-regs-pmu.h
> @@ -52,7 +52,8 @@
>  
>  /* MIPI_PHYn_CONTROL, valid for Exynos3250, Exynos4, Exynos5250 and Exynos5433 */
>  #define EXYNOS4_MIPI_PHY_CONTROL(n)		(0x0710 + (n) * 4)
> -#define EXYNOS4_MIPI_PHY_ENABLE			(1 << 0)
> +/* Phy enable bit, common for all phy registers, not only MIPI */
> +#define EXYNOS4_PHY_ENABLE			(1 << 0)
>  #define EXYNOS4_MIPI_PHY_SRESETN		(1 << 1)
>  #define EXYNOS4_MIPI_PHY_MRESETN		(1 << 2)
>  #define EXYNOS4_MIPI_PHY_RESET_MASK		(3 << 1)

-- 
Lee Jones
Linaro STMicroelectronics Landing Team Lead
Linaro.org │ Open source software for ARM SoCs
Follow Linaro: Facebook | Twitter | Blog
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux SoC Development]     [Linux Rockchip Development]     [Linux USB Development]     [Video for Linux]     [Linux Audio Users]     [Linux SCSI]     [Yosemite News]

  Powered by Linux