Hi Charles,
2017-03-01 2:04 GMT+09:00 Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>:
> As the pinctrl is now added before the GPIOs are registered we need to
> manually calculate what the GPIO base will be, otherwise the base for
> each gpio_range will be set to zero. Fortunately the driver
> already assigns a GPIO base, in samsung_gpiolib_register, and uses the
> same calculation it does for the pin_base. Meaning the two will always
> be the same and allowing us to reuse the pinbase and avoid the issue.
Sorry, I didn't notice before and I don't see the offending patch in ,
but you should add
Fixes: XXXXXXXXXXXX ("pinctrl: Patch subject")
if you intend to submit this patch separately. Otherwise, maybe this
can be just squashed?
>
> Signed-off-by: Charles Keepax <ckeepax@xxxxxxxxxxxxxxxxxxxxxxxxxxx>
> ---
>
> Changes since v1:
> - Use grange.base in samsung_gpiolib_register to make it more
> clear the two are related in the driver.
Other than the above:
Acked-by: Tomasz Figa <tomasz.figa@xxxxxxxxx>
Best regards,
Tomasz
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
