On 02/24/2017 07:11 AM, Krzysztof Kozlowski wrote:
The CONFIG prefix from defines in the s3c2410_wdt.c might suggest that
these constants come from Kconfig.
Signed-off-by: Krzysztof Kozlowski <krzk@xxxxxxxxxx>
Reviewed-by: Guenter Roeck <linux@xxxxxxxxxxxx>
---
drivers/watchdog/s3c2410_wdt.c | 16 ++++++++--------
1 file changed, 8 insertions(+), 8 deletions(-)
diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c
index 59e95762a6de..3e216f54cb6f 100644
--- a/drivers/watchdog/s3c2410_wdt.c
+++ b/drivers/watchdog/s3c2410_wdt.c
@@ -64,8 +64,8 @@
#define S3C2410_WTCON_PRESCALE_MASK (0xff << 8)
#define S3C2410_WTCON_PRESCALE_MAX 0xff
-#define CONFIG_S3C2410_WATCHDOG_ATBOOT (0)
-#define CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME (15)
+#define S3C2410_WATCHDOG_ATBOOT (0)
+#define S3C2410_WATCHDOG_DEFAULT_TIME (15)
#define EXYNOS5_RST_STAT_REG_OFFSET 0x0404
#define EXYNOS5_WDT_DISABLE_REG_OFFSET 0x0408
@@ -79,7 +79,7 @@
static bool nowayout = WATCHDOG_NOWAYOUT;
static int tmr_margin;
-static int tmr_atboot = CONFIG_S3C2410_WATCHDOG_ATBOOT;
+static int tmr_atboot = S3C2410_WATCHDOG_ATBOOT;
static int soft_noboot;
static int debug;
@@ -90,10 +90,10 @@ module_param(soft_noboot, int, 0);
module_param(debug, int, 0);
MODULE_PARM_DESC(tmr_margin, "Watchdog tmr_margin in seconds. (default="
- __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME) ")");
+ __MODULE_STRING(S3C2410_WATCHDOG_DEFAULT_TIME) ")");
MODULE_PARM_DESC(tmr_atboot,
"Watchdog is started at boot time if set to 1, default="
- __MODULE_STRING(CONFIG_S3C2410_WATCHDOG_ATBOOT));
+ __MODULE_STRING(S3C2410_WATCHDOG_ATBOOT));
MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
__MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
MODULE_PARM_DESC(soft_noboot, "Watchdog action, set to 1 to ignore reboots, "
@@ -406,7 +406,7 @@ static struct watchdog_ops s3c2410wdt_ops = {
static struct watchdog_device s3c2410_wdd = {
.info = &s3c2410_wdt_ident,
.ops = &s3c2410wdt_ops,
- .timeout = CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME,
+ .timeout = S3C2410_WATCHDOG_DEFAULT_TIME,
};
/* interrupt handler code */
@@ -600,12 +600,12 @@ static int s3c2410wdt_probe(struct platform_device *pdev)
wdt->wdt_device.timeout);
if (ret) {
started = s3c2410wdt_set_heartbeat(&wdt->wdt_device,
- CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
+ S3C2410_WATCHDOG_DEFAULT_TIME);
if (started == 0)
dev_info(dev,
"tmr_margin value out of range, default %d used\n",
- CONFIG_S3C2410_WATCHDOG_DEFAULT_TIME);
+ S3C2410_WATCHDOG_DEFAULT_TIME);
else
dev_info(dev, "default timer value is out of range, "
"cannot start\n");
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
