Add the device tree node for the ir-spi driver which enable the ir led for remote controlling. This patch sets first the GPR3[3] gpio line as a regulator-fixed for enabling an external regulator which powers the IR LED. Removes also the default assignment of GPG3[7] related to the MOSI line of the SPI3 bus. Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx> --- Changelog v1 -> v2 ================== v1: https://marc.info/?l=linux-kernel&m=148645523229894&w=2 - used 'GPIO_ACTIVE_HIGH' instead of '0' - added back the gpg3-5 gpio initialization related to the SPI3 CS line that was erroneously removed .../boot/dts/exynos/exynos5433-tm2-common.dtsi | 26 +++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi index 098ad557fee3..4df6b57a0a68 100644 --- a/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi +++ b/arch/arm64/boot/dts/exynos/exynos5433-tm2-common.dtsi @@ -106,6 +106,13 @@ }; }; + irda_regulator: irda-regulator { + compatible = "regulator-fixed"; + enable-active-high; + gpio = <&gpr3 3 GPIO_ACTIVE_HIGH>; + regulator-name = "irda_regulator"; + }; + sound { compatible = "samsung,tm2-audio"; audio-codec = <&wm5110>; @@ -1074,7 +1081,6 @@ PIN(INPUT, gpg3-0, DOWN, FAST_SR1); PIN(INPUT, gpg3-1, DOWN, FAST_SR1); PIN(INPUT, gpg3-5, DOWN, FAST_SR1); - PIN(INPUT, gpg3-7, DOWN, FAST_SR1); }; }; @@ -1152,6 +1158,24 @@ }; }; +&spi_3 { + status = "okay"; + no-cs-readback; + + irled@0 { + compatible = "ir-spi-led"; + reg = <0x0>; + spi-max-frequency = <5000000>; + power-supply = <&irda_regulator>; + duty-cycle = <60>; + led-active-low; + + controller-data { + samsung,spi-feedback-delay = <0>; + }; + }; +}; + &timer { clock-frequency = <24000000>; }; -- 2.11.0 -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |