Hi Andi,
On 2016년 12월 29일 18:17, Chanwoo Choi wrote:
> Hi Andi,
>
> On 2016년 12월 29일 17:42, Andi Shyti wrote:
>> Commit 5db7e3bb87df ("pinctrl: dt-bindings: samsung: Add header with
>> values used for configuration") has added a header file for defining the
>> pinctrl values in order to avoid hardcoded settings in the Exynos
>> DTS related files.
>>
>> Extend samsung.h to the Exynos5433 for drive strength values
>> which are strictly related to the particular SoC and may defer
>> from others.
>>
>> Signed-off-by: Andi Shyti <andi.shyti@xxxxxxxxxxx>
>> ---
>> include/dt-bindings/pinctrl/samsung.h | 6 ++++++
>> 1 file changed, 6 insertions(+)
>>
>> diff --git a/include/dt-bindings/pinctrl/samsung.h b/include/dt-bindings/pinctrl/samsung.h
>> index 6276eb785e2b..58868313d64b 100644
>> --- a/include/dt-bindings/pinctrl/samsung.h
>> +++ b/include/dt-bindings/pinctrl/samsung.h
>> @@ -45,6 +45,12 @@
>> #define EXYNOS5420_PIN_DRV_LV3 2
>> #define EXYNOS5420_PIN_DRV_LV4 3
>>
>> +/* Drive strengths for Exynos5433 */
>> +#define EXYNOS5433_PIN_DRV_LV1 0
>> +#define EXYNOS5433_PIN_DRV_LV2 1
>> +#define EXYNOS5433_PIN_DRV_LV3 2
>> +#define EXYNOS5433_PIN_DRV_LV4 3
>
> Exynos5433 has the same value with EXYNOS5420. So, I'd like you to use the EXYNOS5420_PIN_DRV_LVx instead of separate the definitions.
I found the problem to handle the *_DRV register of Exynos5433. Because Exynos5433 has the different width length of *_DRV (PINCFG_TYPE_DRV) bitfields from Exynos542x as following. When I was sending the exynos5433 pinctrl patches, I was missing this issue.
Exynos5422/Exynos5410 have two different bitfields in the same register to set the DRV_LVx as following:
(n=0 to 7)
[2n+1:2n] : 2bits
0x0 = 1x,
0x1 = 2x,
0x2 = 3x,
0x3 = 4x,
[n+16:16]
0x0 = Fast Slew Rate,
0x1 = Slow Slew Rate,
But, Exynos5433 has the following value for PIN_DRV_LVx without additional bitfields to separate 'Fast Slew Rate' and 'Slow Slew Rate'. Just exynos5433 defines the 'Fast Slew Rate(0x0 ~ 0x5)' and 'Slow Slew Rate (0x8 ~ 0xF)'.
(n=0 to 7)
[4n+3:4n] : 4 bits
0x0 = Fast Slew Rate 1x
0x1 = Fast Slew Rate 2x
0x2 = Fast Slew Rate 3x
0x3 = Fast Slew Rate 4x
0x4 = Fast Slew Rate 5x
0x5 = Fast Slew Rate 6x
0x8 = Slow Slew Rate 1x
0x9 = Slow Slew Rate 2x
0xA = Slow Slew Rate 3x
0xB = Slow Slew Rate 4x
0xC = Slow Slew Rate 5x
0xF = Slow Slew Rate 6x
So, before this patch, we have to fix it to support the DRV reigster of Exynos5433.
I'll fix it.
>
>> +
>> #define EXYNOS_PIN_FUNC_INPUT 0
>> #define EXYNOS_PIN_FUNC_OUTPUT 1
>> #define EXYNOS_PIN_FUNC_2 2
>>
>
--
Regards,
Chanwoo Choi
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
