Add Device Tree binding documentation for the clocks
outputs in the Maxim-8997 Power Management IC.
CC: Michael Turquette <mturquette@xxxxxxxxxxxx>
CC: Rob Herring <robh+dt@xxxxxxxxxx>
CC: devicetree@xxxxxxxxxxxxxxx
CC: linux-clk@xxxxxxxxxxxxxxx
Signed-off-by: Pankaj Dubey <pankaj.dubey@xxxxxxxxxxx>
---
.../devicetree/bindings/clock/maxim,max8997.txt | 44 ++++++++++++++++++++++
.../bindings/regulator/max8997-regulator.txt | 3 ++
2 files changed, 47 insertions(+)
create mode 100644 Documentation/devicetree/bindings/clock/maxim,max8997.txt
diff --git a/Documentation/devicetree/bindings/clock/maxim,max8997.txt b/Documentation/devicetree/bindings/clock/maxim,max8997.txt
new file mode 100644
index 0000000..d2e2a74
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/maxim,max8997.txt
@@ -0,0 +1,44 @@
+Binding for Maxim MAX8997 32k clock generator block
+
+This is a part of device tree bindings of MAX8997 multi-function device.
+More information can be found in bindings/regulator/max8997-regulator.txt file.
+
+The MAX8997 contains two 32.768khz clock outputs that can be controlled
+(gated/ungated) over I2C.
+
+Following properties should be presend in main device node of the MFD chip.
+
+Required properties:
+
+- #clock-cells: from common clock binding; shall be set to 1.
+
+Optional properties:
+- clock-output-names: From common clock binding.
+
+Each clock is assigned an identifier and client nodes can use this identifier
+to specify the clock which they consume. Following indices are allowed:
+ - 0: 32khz_ap clock,
+ - 1: 32khz_cp clock,
+
+Clocks are defined as preprocessor macros in dt-bindings/clock/maxim,max8997.h
+header and can be used in device tree sources.
+
+Example: Node of the MFD chip
+
+ max8997: max8997_pmic@66 {
+ compatible = "maxim,max8997-pmic";
+ reg = <0x66>;
+ interrupt-parent = <&gpx0>;
+ interrupts = <4 0>, <3 0>;
+ #clock-cells = <1>;
+ /* ... */
+ };
+
+Example: Clock consumer node
+
+ foo@0 {
+ compatible = "bar,foo";
+ /* ... */
+ clocks = <&max8997 MAX8997_CLK_AP>;
+ clock-names = "my-clock";
+ };
diff --git a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
index 5c186a7..af1f9c0 100644
--- a/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
+++ b/Documentation/devicetree/bindings/regulator/max8997-regulator.txt
@@ -6,6 +6,9 @@ interfaced to the host controller using a i2c interface. Each sub-block is
addressed by the host system using different i2c slave address. This document
describes the bindings for 'pmic' sub-block of max8997.
+Binding for the built-in 32k clock generator block is defined separately
+in bindings/clk/maxim,max8997.txt file
+
Required properties:
- compatible: Should be "maxim,max8997-pmic".
- reg: Specifies the i2c slave address of the pmic block. It should be 0x66.
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
