Allows configuring Samsung's s3c2410 memory controller using a
devicetree.
Signed-off-by: Sergio Prado <sergio.prado@xxxxxxxxxxxxxx>
---
drivers/mtd/nand/s3c2410.c | 155 ++++++++++++++++++++++---
include/linux/platform_data/mtd-nand-s3c2410.h | 1 +
2 files changed, 140 insertions(+), 16 deletions(-)
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 371db0d48135..52f768f01b0d 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -39,6 +39,8 @@
#include <linux/slab.h>
#include <linux/clk.h>
#include <linux/cpufreq.h>
+#include <linux/of.h>
+#include <linux/of_device.h>
#include <linux/mtd/mtd.h>
#include <linux/mtd/nand.h>
@@ -185,6 +187,22 @@ struct s3c2410_nand_info {
#endif
};
+struct s3c24XX_nand_devtype_data {
+ enum s3c_cpu_type type;
+};
+
+static const struct s3c24XX_nand_devtype_data s3c2410_nand_devtype_data = {
+ .type = TYPE_S3C2410,
+};
+
+static const struct s3c24XX_nand_devtype_data s3c2412_nand_devtype_data = {
+ .type = TYPE_S3C2412,
+};
+
+static const struct s3c24XX_nand_devtype_data s3c2440_nand_devtype_data = {
+ .type = TYPE_S3C2440,
+};
+
/* conversion functions */
static struct s3c2410_nand_mtd *s3c2410_nand_mtd_toours(struct mtd_info *mtd)
@@ -794,6 +812,34 @@ static int s3c2410_nand_add_partition(struct s3c2410_nand_info *info,
return -ENODEV;
}
+static int s3c2410_nand_setup_data_interface(struct mtd_info *mtd,
+ const struct nand_data_interface *conf,
+ bool check_only)
+{
+ struct s3c2410_nand_info *info = s3c2410_nand_mtd_toinfo(mtd);
+ struct s3c2410_platform_nand *pdata = info->platform;
+ struct device_node *np = info->device->of_node;
+ const struct nand_sdr_timings *timings;
+ int tacls;
+
+ /* auto-detect timings when booting with a device tree */
+ if (np) {
+ timings = nand_get_sdr_timings(conf);
+ if (IS_ERR(timings))
+ return -ENOTSUPP;
+
+ tacls = timings->tCLS_min - timings->tWP_min;
+ if (tacls < 0)
+ tacls = 0;
+
+ pdata->tacls = DIV_ROUND_UP(tacls, 1000);
+ pdata->twrph0 = DIV_ROUND_UP(timings->tWP_min, 1000);
+ pdata->twrph1 = DIV_ROUND_UP(timings->tCLH_min, 1000);
+ }
+
+ return 0;
+}
+
/**
* s3c2410_nand_init_chip - initialise a single instance of an chip
* @info: The base NAND controller the chip is on.
@@ -811,9 +857,12 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
struct nand_chip *chip = &nmtd->chip;
void __iomem *regs = info->regs;
+ nand_set_flash_node(chip, set->of_node);
+
chip->write_buf = s3c2410_nand_write_buf;
chip->read_buf = s3c2410_nand_read_buf;
chip->select_chip = s3c2410_nand_select_chip;
+ chip->setup_data_interface = s3c2410_nand_setup_data_interface;
chip->chip_delay = 50;
nand_set_controller_data(chip, nmtd);
chip->options = set->options;
@@ -859,12 +908,9 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
chip->ecc.mode = info->platform->ecc_mode;
/* If you use u-boot BBT creation code, specifying this flag will
- * let the kernel fish out the BBT from the NAND, and also skip the
- * full NAND scan that can take 1/2s or so. Little things... */
- if (set->flash_bbt) {
+ * let the kernel fish out the BBT from the NAND */
+ if (set->flash_bbt)
chip->bbt_options |= NAND_BBT_USE_FLASH;
- chip->options |= NAND_SKIP_BBTSCAN;
- }
}
/**
@@ -943,6 +989,77 @@ static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
return -EINVAL;
}
+ if (chip->bbt_options & NAND_BBT_USE_FLASH)
+ chip->options |= NAND_SKIP_BBTSCAN;
+
+ return 0;
+}
+
+static const struct of_device_id s3c24xx_nand_dt_ids[] = {
+ {
+ .compatible = "samsung,s3c2410-nand",
+ .data = &s3c2410_nand_devtype_data,
+ }, {
+ .compatible = "samsung,s3c2412-nand", /* also compatible with s3c6400 */
+ .data = &s3c2412_nand_devtype_data,
+ }, {
+ .compatible = "samsung,s3c2440-nand",
+ .data = &s3c2440_nand_devtype_data,
+ },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, s3c24xx_nand_dt_ids);
+
+static int s3c24xx_nand_probe_dt(struct platform_device *pdev)
+{
+ const struct s3c24XX_nand_devtype_data *devtype_data;
+ struct s3c2410_platform_nand *pdata;
+ struct s3c2410_nand_info *info = platform_get_drvdata(pdev);
+ struct device_node *np = pdev->dev.of_node, *child;
+ struct s3c2410_nand_set *sets;
+
+ devtype_data = of_device_get_match_data(&pdev->dev);
+ if (!devtype_data)
+ return -ENODEV;
+
+ info->cpu_type = devtype_data->type;
+
+ pdata = devm_kzalloc(&pdev->dev, sizeof(*pdata), GFP_KERNEL);
+ if (!pdata)
+ return -ENOMEM;
+
+ pdev->dev.platform_data = pdata;
+
+ pdata->nr_sets = of_get_child_count(np);
+ if (!pdata->nr_sets)
+ return 0;
+
+ sets = devm_kzalloc(&pdev->dev, sizeof(*sets) * pdata->nr_sets, GFP_KERNEL);
+ if (!sets)
+ return -ENOMEM;
+
+ pdata->sets = sets;
+
+ for_each_available_child_of_node(np, child) {
+
+ sets->name = (char *)child->name;
+ sets->of_node = child;
+ sets->nr_chips = 1;
+
+ of_node_get(child);
+
+ sets++;
+ }
+
+ return 0;
+}
+
+static int s3c24xx_nand_probe_pdata(struct platform_device *pdev)
+{
+ struct s3c2410_nand_info *info = platform_get_drvdata(pdev);
+
+ info->cpu_type = platform_get_device_id(pdev)->driver_data;
+
return 0;
}
@@ -955,8 +1072,7 @@ static int s3c2410_nand_update_chip(struct s3c2410_nand_info *info,
*/
static int s3c24xx_nand_probe(struct platform_device *pdev)
{
- struct s3c2410_platform_nand *plat = to_nand_plat(pdev);
- enum s3c_cpu_type cpu_type;
+ struct s3c2410_platform_nand *plat;
struct s3c2410_nand_info *info;
struct s3c2410_nand_mtd *nmtd;
struct s3c2410_nand_set *sets;
@@ -966,8 +1082,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
int nr_sets;
int setno;
- cpu_type = platform_get_device_id(pdev)->driver_data;
-
info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
if (info == NULL) {
err = -ENOMEM;
@@ -989,6 +1103,16 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
s3c2410_nand_clk_set_state(info, CLOCK_ENABLE);
+ if (pdev->dev.of_node)
+ err = s3c24xx_nand_probe_dt(pdev);
+ else
+ err = s3c24xx_nand_probe_pdata(pdev);
+
+ if (err)
+ goto exit_error;
+
+ plat = to_nand_plat(pdev);
+
/* allocate and map the resource */
/* currently we assume we have the one resource */
@@ -997,7 +1121,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
info->device = &pdev->dev;
info->platform = plat;
- info->cpu_type = cpu_type;
info->regs = devm_ioremap_resource(&pdev->dev, res);
if (IS_ERR(info->regs)) {
@@ -1007,12 +1130,6 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
dev_dbg(&pdev->dev, "mapped registers at %p\n", info->regs);
- /* initialise the hardware */
-
- err = s3c2410_nand_inithw(info);
- if (err != 0)
- goto exit_error;
-
sets = (plat != NULL) ? plat->sets : NULL;
nr_sets = (plat != NULL) ? plat->nr_sets : 1;
@@ -1056,6 +1173,11 @@ static int s3c24xx_nand_probe(struct platform_device *pdev)
sets++;
}
+ /* initialise the hardware */
+ err = s3c2410_nand_inithw(info);
+ if (err != 0)
+ goto exit_error;
+
err = s3c2410_nand_cpufreq_register(info);
if (err < 0) {
dev_err(&pdev->dev, "failed to init cpufreq support\n");
@@ -1156,6 +1278,7 @@ static int s3c24xx_nand_resume(struct platform_device *dev)
.id_table = s3c24xx_driver_ids,
.driver = {
.name = "s3c24xx-nand",
+ .of_match_table = s3c24xx_nand_dt_ids,
},
};
diff --git a/include/linux/platform_data/mtd-nand-s3c2410.h b/include/linux/platform_data/mtd-nand-s3c2410.h
index 729af13d1773..f01659026b26 100644
--- a/include/linux/platform_data/mtd-nand-s3c2410.h
+++ b/include/linux/platform_data/mtd-nand-s3c2410.h
@@ -40,6 +40,7 @@ struct s3c2410_nand_set {
char *name;
int *nr_map;
struct mtd_partition *partitions;
+ struct device_node *of_node;
};
struct s3c2410_platform_nand {
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
