The commit b05984e21a7e000bf5074ace00d7a574944b2c16 broke
operation of the G2D. After this commit the following
happens.
- exynos_g2d_exec_ioctl() prepares a runqueue node and
calls g2d_exec_runqueue()
- g2d_exec_runqueue() calls g2d_dma_start() which gets
runtime PM sync
- runtime PM calls g2d_runtime_resume()
- g2d_runtime_resume() calls g2d_exec_runqueue()
Luckily for us this doesn't really loop, but creates a
mutex lockup, which the kernel even predicts.
Anyway, we fix this by reintroducing dedicated sleep
operations again, and only letting runtime PM control
the gate clock.
This is not enough to fix the issue though.
- We switch runtime PM to autosuspend. Currently clocks get
disabled, and then re-enabled again in the runqueue worker
when a node is completed and the next is started.
With the upcoming introduction of IOMMU runtime PM this
situations gets worse, since now also the IOMMU goes
through a disable/enable cycle before the next node is
started.
- We consolidate all runtime PM management to the runqueue
worker.
- We introduce g2d_wait_finish() which waits until the currently
processed runqueue node is finished.
If this takes too long, the engine is forcibly reset. This
is necessary to properly close the driver in case the engine
should hang with read/write access to some area of memory.
In this situation we can't properly unmap GEM/userptr
objects, since this might create a pagefault.
- Sleep suspend issues a suspend of the runqueue and then calls
g2d_wait_finished(), which returns the engine in the idle state.
The current runqueue node gets completed, all other queued
nodes stay in the queue. There is no hardware state that
needs to be retained.
- Sleep resume just pokes the runqueue worker, which, should
something be in queue, continues its work, or just exits.
Signed-off-by: Tobias Jakobi <tjakobi@xxxxxxxxxxxxxxxxxxxxx>
---
drivers/gpu/drm/exynos/exynos_drm_g2d.c | 235 +++++++++++++++++++++++++-------
1 file changed, 186 insertions(+), 49 deletions(-)
diff --git a/drivers/gpu/drm/exynos/exynos_drm_g2d.c b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
index 6eca8bb..c4f7026 100644
--- a/drivers/gpu/drm/exynos/exynos_drm_g2d.c
+++ b/drivers/gpu/drm/exynos/exynos_drm_g2d.c
@@ -138,6 +138,18 @@ enum g2d_reg_type {
MAX_REG_TYPE_NR
};
+enum g2d_flag_bits {
+ /*
+ * If set, suspends the runqueue worker after the currently
+ * processed node is finished.
+ */
+ G2D_BIT_SUSPEND_RUNQUEUE,
+ /*
+ * If set, indicates that the engine is currently busy.
+ */
+ G2D_BIT_ENGINE_BUSY,
+};
+
/* cmdlist data structure */
struct g2d_cmdlist {
u32 head;
@@ -226,7 +238,7 @@ struct g2d_data {
struct workqueue_struct *g2d_workq;
struct work_struct runqueue_work;
struct exynos_drm_subdrv subdrv;
- bool suspended;
+ unsigned long flags;
/* cmdlist */
struct g2d_cmdlist_node *cmdlist_node;
@@ -246,6 +258,12 @@ struct g2d_data {
unsigned long max_pool;
};
+static inline void g2d_hw_reset(struct g2d_data *g2d)
+{
+ writel(G2D_R | G2D_SFRCLEAR, g2d->regs + G2D_SOFT_RESET);
+ clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
+}
+
static int g2d_init_cmdlist(struct g2d_data *g2d)
{
struct device *dev = g2d->dev;
@@ -803,12 +821,8 @@ static void g2d_dma_start(struct g2d_data *g2d,
struct g2d_cmdlist_node *node =
list_first_entry(&runqueue_node->run_cmdlist,
struct g2d_cmdlist_node, list);
- int ret;
-
- ret = pm_runtime_get_sync(g2d->dev);
- if (ret < 0)
- return;
+ set_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
writel_relaxed(node->dma_addr, g2d->regs + G2D_DMA_SFR_BASE_ADDR);
writel_relaxed(G2D_DMA_START, g2d->regs + G2D_DMA_COMMAND);
}
@@ -831,9 +845,6 @@ static void g2d_free_runqueue_node(struct g2d_data *g2d,
{
struct g2d_cmdlist_node *node;
- if (!runqueue_node)
- return;
-
mutex_lock(&g2d->cmdlist_mutex);
/*
* commands in run_cmdlist have been completed so unmap all gem
@@ -847,29 +858,63 @@ static void g2d_free_runqueue_node(struct g2d_data *g2d,
kmem_cache_free(g2d->runqueue_slab, runqueue_node);
}
-static void g2d_exec_runqueue(struct g2d_data *g2d)
+/**
+ * g2d_remove_runqueue_nodes - remove items from the list of runqueue nodes
+ * @g2d: G2D state object
+ * @file: if not zero, only remove items with this DRM file
+ *
+ * Has to be called under runqueue lock.
+ */
+static void g2d_remove_runqueue_nodes(struct g2d_data *g2d, struct drm_file* file)
{
- g2d->runqueue_node = g2d_get_runqueue_node(g2d);
- if (g2d->runqueue_node)
- g2d_dma_start(g2d, g2d->runqueue_node);
+ struct g2d_runqueue_node *node, *n;
+
+ if (list_empty(&g2d->runqueue))
+ return;
+
+ list_for_each_entry_safe(node, n, &g2d->runqueue, list) {
+ if (file && node->filp != file)
+ continue;
+
+ g2d_free_runqueue_node(g2d, node);
+ }
}
static void g2d_runqueue_worker(struct work_struct *work)
{
struct g2d_data *g2d = container_of(work, struct g2d_data,
runqueue_work);
+ struct g2d_runqueue_node *runqueue_node;
+
+ /*
+ * The engine is busy and the completion of the current node is going
+ * to poke the runqueue worker, so nothing to do here.
+ */
+ if (test_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags))
+ return;
mutex_lock(&g2d->runqueue_mutex);
- pm_runtime_put_sync(g2d->dev);
- complete(&g2d->runqueue_node->complete);
- if (g2d->runqueue_node->async)
- g2d_free_runqueue_node(g2d, g2d->runqueue_node);
+ runqueue_node = g2d->runqueue_node;
+ g2d->runqueue_node = NULL;
+
+ if (runqueue_node) {
+ pm_runtime_mark_last_busy(g2d->dev);
+ pm_runtime_put_autosuspend(g2d->dev);
+
+ complete(&runqueue_node->complete);
+ if (runqueue_node->async)
+ g2d_free_runqueue_node(g2d, runqueue_node);
+ }
+
+ if (!test_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags)) {
+ pm_runtime_get_sync(g2d->dev);
+
+ g2d->runqueue_node = g2d_get_runqueue_node(g2d);
+ if (g2d->runqueue_node)
+ g2d_dma_start(g2d, g2d->runqueue_node);
+ }
- if (g2d->suspended)
- g2d->runqueue_node = NULL;
- else
- g2d_exec_runqueue(g2d);
mutex_unlock(&g2d->runqueue_mutex);
}
@@ -918,12 +963,72 @@ static irqreturn_t g2d_irq_handler(int irq, void *dev_id)
}
}
- if (pending & G2D_INTP_ACMD_FIN)
+ if (pending & G2D_INTP_ACMD_FIN) {
+ clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
queue_work(g2d->g2d_workq, &g2d->runqueue_work);
+ }
return IRQ_HANDLED;
}
+/**
+ * g2d_wait_finish - wait for the G2D engine to finish the current runqueue node
+ * @g2d: G2D state object
+ * @file: if not zero, only wait if the current runqueue node belongs
+ * to the DRM file
+ *
+ * Should the engine not become idle after a 100ms timeout, a hardware
+ * reset is issued.
+ */
+static void g2d_wait_finish(struct g2d_data *g2d, struct drm_file *file)
+{
+ struct device *dev = g2d->dev;
+
+ struct g2d_runqueue_node *runqueue_node = NULL;
+ unsigned int tries = 10;
+
+ mutex_lock(&g2d->runqueue_mutex);
+
+ /* If no node is currently processed, we have nothing to do. */
+ if (!g2d->runqueue_node)
+ goto out;
+
+ runqueue_node = g2d->runqueue_node;
+
+ /* Check if the currently processed item belongs to us. */
+ if (file && runqueue_node->filp != file)
+ goto out;
+
+ mutex_unlock(&g2d->runqueue_mutex);
+
+ /* Wait for the G2D engine to finish. */
+ while (tries-- && (g2d->runqueue_node == runqueue_node))
+ mdelay(10);
+
+ mutex_lock(&g2d->runqueue_mutex);
+
+ if (g2d->runqueue_node != runqueue_node)
+ goto out;
+
+ dev_err(dev, "wait timed out, resetting engine...\n");
+ g2d_hw_reset(g2d);
+
+ /*
+ * After the hardware reset of the engine we are going to loose
+ * the IRQ which triggers the PM runtime put().
+ * So do this manually here.
+ */
+ pm_runtime_mark_last_busy(g2d->dev);
+ pm_runtime_put_autosuspend(g2d->dev);
+
+ complete(&runqueue_node->complete);
+ if (runqueue_node->async)
+ g2d_free_runqueue_node(g2d, runqueue_node);
+
+out:
+ mutex_unlock(&g2d->runqueue_mutex);
+}
+
static int g2d_check_reg_offset(struct device *dev,
struct g2d_cmdlist_node *node,
int nr, bool for_addr)
@@ -1259,10 +1364,11 @@ int exynos_g2d_exec_ioctl(struct drm_device *drm_dev, void *data,
runqueue_node->pid = current->pid;
runqueue_node->filp = file;
list_add_tail(&runqueue_node->list, &g2d->runqueue);
- if (!g2d->runqueue_node)
- g2d_exec_runqueue(g2d);
mutex_unlock(&g2d->runqueue_mutex);
+ /* Let the runqueue know that there is work to do. */
+ queue_work(g2d->g2d_workq, &g2d->runqueue_work);
+
if (runqueue_node->async)
goto out;
@@ -1339,15 +1445,27 @@ static void g2d_close(struct drm_device *drm_dev, struct device *dev,
if (!g2d)
return;
+ /* Remove the runqueue nodes that belong to us. */
+ mutex_lock(&g2d->runqueue_mutex);
+ g2d_remove_runqueue_nodes(g2d, file);
+ mutex_unlock(&g2d->runqueue_mutex);
+
+ /*
+ * Wait for the runqueue worker to finish its current node.
+ * After this the engine should no longer be accessing any
+ * memory belonging to us.
+ */
+ g2d_wait_finish(g2d, file);
+
+ /*
+ * Even after the engine is idle, there might still be stale cmdlists
+ * (i.e. cmdlisst which we submitted but never executed) around, with
+ * their corresponding GEM/userptr buffers.
+ * Properly unmap these buffers here.
+ */
mutex_lock(&g2d->cmdlist_mutex);
list_for_each_entry_safe(node, n, &g2d_priv->inuse_cmdlist, list) {
- /*
- * unmap all gem objects not completed.
- *
- * P.S. if current process was terminated forcely then
- * there may be some commands in inuse_cmdlist so unmap
- * them.
- */
+
g2d_unmap_cmdlist_gem(g2d, node, file);
list_move_tail(&node->list, &g2d->free_cmdlist);
}
@@ -1399,7 +1517,11 @@ static int g2d_probe(struct platform_device *pdev)
goto err_destroy_workqueue;
}
+ pm_runtime_use_autosuspend(dev);
+ pm_runtime_set_autosuspend_delay(dev, 2000);
pm_runtime_enable(dev);
+ clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
+ clear_bit(G2D_BIT_ENGINE_BUSY, &g2d->flags);
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
@@ -1458,13 +1580,15 @@ static int g2d_remove(struct platform_device *pdev)
{
struct g2d_data *g2d = platform_get_drvdata(pdev);
+ /* Suspend operation and wait for engine idle. */
+ set_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
+ g2d_wait_finish(g2d, NULL);
+
cancel_work_sync(&g2d->runqueue_work);
exynos_drm_subdrv_unregister(&g2d->subdrv);
- while (g2d->runqueue_node) {
- g2d_free_runqueue_node(g2d, g2d->runqueue_node);
- g2d->runqueue_node = g2d_get_runqueue_node(g2d);
- }
+ /* There should be no locking needed here. */
+ g2d_remove_runqueue_nodes(g2d, NULL);
pm_runtime_disable(&pdev->dev);
@@ -1475,20 +1599,37 @@ static int g2d_remove(struct platform_device *pdev)
return 0;
}
-#ifdef CONFIG_PM
-static int g2d_runtime_suspend(struct device *dev)
+#ifdef CONFIG_PM_SLEEP
+static int g2d_suspend(struct device *dev)
{
struct g2d_data *g2d = dev_get_drvdata(dev);
- mutex_lock(&g2d->runqueue_mutex);
- g2d->suspended = true;
- mutex_unlock(&g2d->runqueue_mutex);
+ /*
+ * Suspend the runqueue worker operation and wait until the G2D
+ * engine is idle.
+ */
+ set_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
+ g2d_wait_finish(g2d, NULL);
+ flush_work(&g2d->runqueue_work);
- while (g2d->runqueue_node)
- /* FIXME: good range? */
- usleep_range(500, 1000);
+ return 0;
+}
- flush_work(&g2d->runqueue_work);
+static int g2d_resume(struct device *dev)
+{
+ struct g2d_data *g2d = dev_get_drvdata(dev);
+
+ clear_bit(G2D_BIT_SUSPEND_RUNQUEUE, &g2d->flags);
+ queue_work(g2d->g2d_workq, &g2d->runqueue_work);
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_PM
+static int g2d_runtime_suspend(struct device *dev)
+{
+ struct g2d_data *g2d = dev_get_drvdata(dev);
clk_disable_unprepare(g2d->gate_clk);
@@ -1504,16 +1645,12 @@ static int g2d_runtime_resume(struct device *dev)
if (ret < 0)
dev_warn(dev, "failed to enable clock.\n");
- g2d->suspended = false;
- g2d_exec_runqueue(g2d);
-
return ret;
}
#endif
static const struct dev_pm_ops g2d_pm_ops = {
- SET_SYSTEM_SLEEP_PM_OPS(pm_runtime_force_suspend,
- pm_runtime_force_resume)
+ SET_SYSTEM_SLEEP_PM_OPS(g2d_suspend, g2d_resume)
SET_RUNTIME_PM_OPS(g2d_runtime_suspend, g2d_runtime_resume, NULL)
};
--
2.7.3
--
To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
