Hello Marek, I did some tests with the new version today. Sadly the reboot/shutdown issues are still present. Here's what appears on the UART last: > [ 399.538147] sd 0:0:0:0: [sda] Synchronizing SCSI cache > [ 404.970649] smsc95xx 1-2.1.1:1.0 eth0: Failed to read reg index 0x00000114: -110 > [ 404.972426] smsc95xx 1-2.1.1:1.0 eth0: Error reading MII_ACCESS > [ 404.978336] smsc95xx 1-2.1.1:1.0 eth0: MII is busy in smsc95xx_mdio_read > [ 404.985020] smsc95xx 1-2.1.1:1.0 eth0: Failed to read MII_BMSR > [ 434.170626] usb 1-2-port2: cannot reset (err = -110) > [ 435.210242] usb 1-2-port2: cannot reset (err = -110) > [ 436.250261] usb 1-2-port2: cannot reset (err = -110) > [ 437.290241] usb 1-2-port2: cannot reset (err = -110) > [ 438.330241] usb 1-2-port2: cannot reset (err = -110) > [ 438.330346] usb 1-2-port2: Cannot enable. Maybe the USB cable is bad? > [ 439.370608] usb 1-2-port2: cannot disable (err = -110) > [ 440.410225] usb 1-2-port2: cannot reset (err = -110) > [ 441.450236] usb 1-2-port2: cannot reset (err = -110) > [ 442.490222] usb 1-2-port2: cannot reset (err = -110) > [ 443.530224] usb 1-2-port2: cannot reset (err = -110) > [ 444.570228] usb 1-2-port2: cannot reset (err = -110) > [ 444.570331] usb 1-2-port2: Cannot enable. Maybe the USB cable is bad? > [ 445.610227] usb 1-2-port2: cannot disable (err = -110) > [ 446.650230] usb 1-2-port2: cannot reset (err = -110) > [ 447.690231] usb 1-2-port2: cannot reset (err = -110) > [ 448.730235] usb 1-2-port2: cannot reset (err = -110) > [ 449.770235] usb 1-2-port2: cannot reset (err = -110) > [ 450.810239] usb 1-2-port2: cannot reset (err = -110) > [ 450.810342] usb 1-2-port2: Cannot enable. Maybe the USB cable is bad? > [ 451.850240] usb 1-2-port2: cannot disable (err = -110) > [ 452.890243] usb 1-2-port2: cannot reset (err = -110) > [ 453.930271] usb 1-2-port2: cannot reset (err = -110) > [ 454.970247] usb 1-2-port2: cannot reset (err = -110) > [ 456.010250] usb 1-2-port2: cannot reset (err = -110) > [ 457.050251] usb 1-2-port2: cannot reset (err = -110) > [ 457.050353] usb 1-2-port2: Cannot enable. Maybe the USB cable is bad? > [ 458.090250] usb 1-2-port2: cannot disable (err = -110) > [ 459.130603] usb 1-2-port2: cannot disable (err = -110) > [ 464.330286] hub 1-2:1.0: hub_ext_port_status failed (err = -110) If I trigger a stack trace via SysRq at this point, I get this here: > [ 672.679321] sysrq: SysRq : Show backtrace of all active CPUs > [ 672.679448] Sending NMI to all CPUs: > [ 672.682901] NMI backtrace for cpu 0 > [ 672.686377] CPU: 0 PID: 0 Comm: swapper/0 Not tainted 4.8.0-rc7-debug+ #6 > [ 672.693149] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 672.699223] Backtrace: > [ 672.701657] [<c010c9bc>] (dump_backtrace) from [<c010cb68>] (show_stack+0x18/0x1c) > [ 672.709212] r6:c0c25e40 r5:600401d3 r4:00000000 r3:00040800 > [ 672.714845] [<c010cb50>] (show_stack) from [<c039bef8>] (dump_stack+0xb0/0xdc) > [ 672.722062] [<c039be48>] (dump_stack) from [<c03a089c>] (nmi_cpu_backtrace+0x88/0x8c) > [ 672.729870] r8:c0c27f88 r7:c010e87c r6:00000000 r5:00000000 r4:00000000 r3:00000000 > [ 672.737590] [<c03a0814>] (nmi_cpu_backtrace) from [<c010e8d8>] (raise_nmi+0x5c/0x60) > [ 672.745320] r5:c0c0281c r4:c0c0281c > [ 672.748868] [<c010e87c>] (raise_nmi) from [<c03a0800>] (nmi_trigger_all_cpu_backtrace+0x120/0x134) > [ 672.757821] r4:00000001 r3:00000000 > [ 672.761367] [<c03a06e0>] (nmi_trigger_all_cpu_backtrace) from [<c010f5c0>] (arch_trigger_all_cpu_backtrace+0x18/0x1c) > [ 672.771972] r7:00000001 r6:00000008 r5:0000006c r4:c0c0cf0c > [ 672.777601] [<c010f5a8>] (arch_trigger_all_cpu_backtrace) from [<c03fc7c0>] (sysrq_handle_showallcpus+0x14/0x18) > [ 672.787774] [<c03fc7ac>] (sysrq_handle_showallcpus) from [<c03fcfc8>] (__handle_sysrq+0x104/0x268) > [ 672.796711] [<c03fcec4>] (__handle_sysrq) from [<c03fd5d4>] (handle_sysrq+0x34/0x38) > [ 672.804431] r8:c0c02100 r7:c0c2b994 r6:00000040 r5:00000000 r4:c0c2b964 > [ 672.811106] [<c03fd5a0>] (handle_sysrq) from [<c0412564>] (s3c24xx_serial_rx_drain_fifo+0x1fc/0x22c) > [ 672.820236] [<c0412368>] (s3c24xx_serial_rx_drain_fifo) from [<c04133f8>] (s3c24xx_serial_rx_chars+0x74/0x1a8) > [ 672.830214] r10:0001000f r9:ee1f2200 r8:200401d3 r7:ed01cc00 r6:c0c2b994 r5:ee2a5550 > [ 672.838013] r4:c0c2b964 > [ 672.840529] [<c0413384>] (s3c24xx_serial_rx_chars) from [<c041357c>] (s3c64xx_serial_handle_irq+0x50/0x68) > [ 672.850178] r10:c0c01e24 r9:00000000 r8:00000047 r7:c0c00000 r6:00000047 r5:00000001 > [ 672.857977] r4:c0c2b964 > [ 672.860496] [<c041352c>] (s3c64xx_serial_handle_irq) from [<c01843b8>] (__handle_irq_event_percpu+0x7c/0x4c4) > [ 672.870403] r6:c0c02848 r5:eeb0a100 r4:ed76b8c0 r3:c041352c > [ 672.876030] [<c018433c>] (__handle_irq_event_percpu) from [<c0184824>] (handle_irq_event_percpu+0x24/0x60) > [ 672.885679] r10:c0c01ee8 r9:ee808000 r8:00000001 r7:00000000 r6:c0c02848 r5:eeb0a100 > [ 672.893478] r4:eeb0a100 > [ 672.895994] [<c0184800>] (handle_irq_event_percpu) from [<c01848a0>] (handle_irq_event+0x40/0x64) > [ 672.904860] r5:eeb0a160 r4:eeb0a100 > [ 672.908406] [<c0184860>] (handle_irq_event) from [<c01881d0>] (handle_fasteoi_irq+0xd8/0x1a8) > [ 672.916925] r6:c0c02848 r5:eeb0a160 r4:eeb0a100 r3:00000000 > [ 672.922554] [<c01880f8>] (handle_fasteoi_irq) from [<c0183ae8>] (generic_handle_irq+0x2c/0x3c) > [ 672.931160] r7:00000000 r6:00000047 r5:00000000 r4:c0b42270 > [ 672.936790] [<c0183abc>] (generic_handle_irq) from [<c0183b7c>] (__handle_domain_irq+0x84/0xf4) > [ 672.945486] [<c0183af8>] (__handle_domain_irq) from [<c0101510>] (gic_handle_irq+0x5c/0xa0) > [ 672.953815] r10:c0c02524 r9:f0821000 r8:f0820000 r7:c0c01ee8 r6:f082000c r5:c0c26380 > [ 672.961616] r4:c0c02848 r3:c0c01ee8 > [ 672.965172] [<c01014b4>] (gic_handle_irq) from [<c010d7b0>] (__irq_svc+0x70/0xb0) > [ 672.972651] Exception stack(0xc0c01ee8 to 0xc0c01f30) > [ 672.977679] 1ee0: 00000001 00000001 00000000 c011b660 c0c00000 c0c448cc > [ 672.985846] 1f00: c0c024d4 00000001 00000000 00000000 c0c02524 c0c01f44 c0c01f08 c0c01f38 > [ 672.994005] 1f20: c01743d4 c01089d4 20040053 ffffffff > [ 672.999029] r9:c0c00000 r8:00000000 r7:c0c01f1c r6:ffffffff r5:20040053 r4:c01089d4 > [ 673.006758] [<c01089a8>] (arch_cpu_idle) from [<c016cdd8>] (default_idle_call+0x28/0x38) > [ 673.014838] [<c016cdb0>] (default_idle_call) from [<c016d190>] (cpu_startup_entry+0x3a8/0x484) > [ 673.023436] [<c016cde8>] (cpu_startup_entry) from [<c0807b00>] (rest_init+0x168/0x178) > [ 673.031327] r7:ffffffff > [ 673.033834] [<c0807998>] (rest_init) from [<c0b00cf8>] (start_kernel+0x384/0x390) > [ 673.041308] r5:c0c49000 r4:00000001 > [ 673.044855] [<c0b00974>] (start_kernel) from [<40008078>] (0x40008078) > [ 673.051486] NMI backtrace for cpu 3 > [ 673.054844] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.8.0-rc7-debug+ #6 > [ 673.061615] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 673.067692] task: ee8b3200 task.stack: ee8be000 > [ 673.072201] PC is at arch_cpu_idle+0x2c/0x44 > [ 673.076455] LR is at trace_hardirqs_on_caller+0x158/0x200 > [ 673.081840] pc : [<c01089d4>] lr : [<c01743d4>] psr: 20010053 > [ 673.088089] sp : ee8bff90 ip : ee8bff60 fp : ee8bff9c > [ 673.093294] r10: c0c02524 r9 : 00000000 r8 : 00000000 > [ 673.098503] r7 : 00000008 r6 : c0c024d4 r5 : c0c448cc r4 : ee8be000 > [ 673.105014] r3 : c011b660 r2 : 00000000 r1 : 00000001 r0 : 00000001 > [ 673.111525] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none > [ 673.118736] Control: 10c5387d Table: 6dc5804a DAC: 00000051 > [ 673.124459] CPU: 3 PID: 0 Comm: swapper/3 Not tainted 4.8.0-rc7-debug+ #6 > [ 673.131229] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 673.137306] Backtrace: > [ 673.139730] [<c010c9bc>] (dump_backtrace) from [<c010cb68>] (show_stack+0x18/0x1c) > [ 673.147292] r6:c0c25e40 r5:600101d3 r4:00000000 r3:00040800 > [ 673.152929] [<c010cb50>] (show_stack) from [<c039bef8>] (dump_stack+0xb0/0xdc) > [ 673.160138] [<c039be48>] (dump_stack) from [<c0108c5c>] (show_regs+0x14/0x18) > [ 673.167251] r8:f082c000 r7:ee8bff40 r6:c0b42270 r5:00000003 r4:ee8bff40 r3:00040800 > [ 673.174982] [<c0108c48>] (show_regs) from [<c03a0880>] (nmi_cpu_backtrace+0x6c/0x8c) > [ 673.182707] [<c03a0814>] (nmi_cpu_backtrace) from [<c010f1c0>] (handle_IPI+0x14c/0x434) > [ 673.190692] r5:c0b42270 r4:00000007 > [ 673.194241] [<c010f074>] (handle_IPI) from [<c0101550>] (gic_handle_irq+0x9c/0xa0) > [ 673.201803] r10:c0c02524 r9:f082d000 r8:f082c000 r7:ee8bff40 r6:f082c00c r5:c0c26380 > [ 673.209615] r4:c0c02848 > [ 673.212121] [<c01014b4>] (gic_handle_irq) from [<c010d7b0>] (__irq_svc+0x70/0xb0) > [ 673.219596] Exception stack(0xee8bff40 to 0xee8bff88) > [ 673.224624] ff40: 00000001 00000001 00000000 c011b660 ee8be000 c0c448cc c0c024d4 00000008 > [ 673.232790] ff60: 00000000 00000000 c0c02524 ee8bff9c ee8bff60 ee8bff90 c01743d4 c01089d4 > [ 673.240952] ff80: 20010053 ffffffff > [ 673.244411] r9:ee8be000 r8:00000000 r7:ee8bff74 r6:ffffffff r5:20010053 r4:c01089d4 > [ 673.252147] [<c01089a8>] (arch_cpu_idle) from [<c016cdd8>] (default_idle_call+0x28/0x38) > [ 673.260221] [<c016cdb0>] (default_idle_call) from [<c016d190>] (cpu_startup_entry+0x3a8/0x484) > [ 673.268816] [<c016cde8>] (cpu_startup_entry) from [<c010ee88>] (secondary_start_kernel+0xf8/0x100) > [ 673.277755] r7:c0c49328 > [ 673.280259] [<c010ed90>] (secondary_start_kernel) from [<401015ec>] (0x401015ec) > [ 673.287648] r5:00000051 r4:6e89406a > [ 673.291197] NMI backtrace for cpu 2 > [ 673.294670] CPU: 2 PID: 3729 Comm: reboot Not tainted 4.8.0-rc7-debug+ #6 > [ 673.301443] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 673.307518] task: ee030c80 task.stack: edec8000 > [ 673.312029] PC is at _raw_spin_unlock_irq+0x30/0x64 > [ 673.316891] LR is at mark_held_locks+0x74/0x9c > [ 673.321317] pc : [<c080ee84>] lr : [<c0174254>] psr: 200a0053 > [ 673.327569] sp : edec9df0 ip : c0d9a4d4 fp : edec9e04 > [ 673.332775] r10: 00000000 r9 : ee029c44 r8 : c0c49020 > [ 673.337984] r7 : ee029cb0 r6 : 00000000 r5 : ee029d84 r4 : ee029cb0 > [ 673.344495] r3 : 600a00d3 r2 : 00000000 r1 : ee031158 r0 : 00000001 > [ 673.351005] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none > [ 673.358215] Control: 10c5387d Table: 6d7ec04a DAC: 00000051 > [ 673.363937] CPU: 2 PID: 3729 Comm: reboot Not tainted 4.8.0-rc7-debug+ #6 > [ 673.370709] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 673.376784] Backtrace: > [ 673.379209] [<c010c9bc>] (dump_backtrace) from [<c010cb68>] (show_stack+0x18/0x1c) > [ 673.386773] r6:c0c25e40 r5:600a01d3 r4:00000000 r3:00040800 > [ 673.392408] [<c010cb50>] (show_stack) from [<c039bef8>] (dump_stack+0xb0/0xdc) > [ 673.399618] [<c039be48>] (dump_stack) from [<c0108c5c>] (show_regs+0x14/0x18) > [ 673.406732] r8:f0828000 r7:edec9da0 r6:c0b42270 r5:00000002 r4:edec9da0 r3:00040800 > [ 673.414462] [<c0108c48>] (show_regs) from [<c03a0880>] (nmi_cpu_backtrace+0x6c/0x8c) > [ 673.422187] [<c03a0814>] (nmi_cpu_backtrace) from [<c010f1c0>] (handle_IPI+0x14c/0x434) > [ 673.430173] r5:c0b42270 r4:00000007 > [ 673.433722] [<c010f074>] (handle_IPI) from [<c0101550>] (gic_handle_irq+0x9c/0xa0) > [ 673.441283] r10:00000000 r9:f0829000 r8:f0828000 r7:edec9da0 r6:f082800c r5:c0c26380 > [ 673.449095] r4:c0c02848 > [ 673.451601] [<c01014b4>] (gic_handle_irq) from [<c010d7b0>] (__irq_svc+0x70/0xb0) > [ 673.459076] Exception stack(0xedec9da0 to 0xedec9de8) > [ 673.464103] 9da0: 00000001 ee031158 00000000 600a00d3 ee029cb0 ee029d84 00000000 ee029cb0 > [ 673.472272] 9dc0: c0c49020 ee029c44 00000000 edec9e04 c0d9a4d4 edec9df0 c0174254 c080ee84 > [ 673.480430] 9de0: 200a0053 ffffffff > [ 673.483892] r9:edec8000 r8:c0c49020 r7:edec9dd4 r6:ffffffff r5:200a0053 r4:c080ee84 > [ 673.491627] [<c080ee54>] (_raw_spin_unlock_irq) from [<c047ab90>] (pm_runtime_barrier+0x68/0xbc) > [ 673.500395] r4:ee029c10 r3:00000080 > [ 673.503942] [<c047ab28>] (pm_runtime_barrier) from [<c046c6d4>] (device_shutdown+0x110/0x1c8) > [ 673.512460] r7:c140755c r6:ee029c10 r5:c0c2e210 r4:ee029c1c > [ 673.518094] [<c046c5c4>] (device_shutdown) from [<c014ad10>] (kernel_restart_prepare+0x3c/0x40) > [ 673.526782] r9:c0c0ae1c r8:00000010 r7:c0c0b244 r6:01234567 r5:00000000 r4:00000000 > [ 673.534506] [<c014acd4>] (kernel_restart_prepare) from [<c014ae68>] (kernel_restart+0x14/0x58) > [ 673.543100] [<c014ae54>] (kernel_restart) from [<c014b13c>] (SyS_reboot+0x114/0x200) > [ 673.550824] r4:c0c02448 r3:01234567 > [ 673.554374] [<c014b028>] (SyS_reboot) from [<c0107ee0>] (ret_fast_syscall+0x0/0x1c) > [ 673.562021] r9:edec8000 r8:c0108084 r7:00000058 r6:010a0008 r5:be9f6ce0 r4:00000001 > [ 673.569748] NMI backtrace for cpu 1 > [ 673.573211] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc7-debug+ #6 > [ 673.579984] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 673.586059] task: ee8b1900 task.stack: ee8ba000 > [ 673.590570] PC is at arch_cpu_idle+0x2c/0x44 > [ 673.594823] LR is at trace_hardirqs_on_caller+0x158/0x200 > [ 673.600206] pc : [<c01089d4>] lr : [<c01743d4>] psr: 200b0053 > [ 673.606457] sp : ee8bbf90 ip : ee8bbf60 fp : ee8bbf9c > [ 673.611664] r10: c0c02524 r9 : 00000000 r8 : 00000000 > [ 673.616872] r7 : 00000002 r6 : c0c024d4 r5 : c0c448cc r4 : ee8ba000 > [ 673.623383] r3 : c011b660 r2 : 00000000 r1 : 00000001 r0 : 00000001 > [ 673.629894] Flags: nzCv IRQs on FIQs off Mode SVC_32 ISA ARM Segment none > [ 673.637103] Control: 10c5387d Table: 6df9804a DAC: 00000051 > [ 673.642827] CPU: 1 PID: 0 Comm: swapper/1 Not tainted 4.8.0-rc7-debug+ #6 > [ 673.649598] Hardware name: SAMSUNG EXYNOS (Flattened Device Tree) > [ 673.655672] Backtrace: > [ 673.658098] [<c010c9bc>] (dump_backtrace) from [<c010cb68>] (show_stack+0x18/0x1c) > [ 673.665660] r6:c0c25e40 r5:600b01d3 r4:00000000 r3:00040800 > [ 673.671296] [<c010cb50>] (show_stack) from [<c039bef8>] (dump_stack+0xb0/0xdc) > [ 673.678506] [<c039be48>] (dump_stack) from [<c0108c5c>] (show_regs+0x14/0x18) > [ 673.685620] r8:f0824000 r7:ee8bbf40 r6:c0b42270 r5:00000001 r4:ee8bbf40 r3:00040800 > [ 673.693350] [<c0108c48>] (show_regs) from [<c03a0880>] (nmi_cpu_backtrace+0x6c/0x8c) > [ 673.701075] [<c03a0814>] (nmi_cpu_backtrace) from [<c010f1c0>] (handle_IPI+0x14c/0x434) > [ 673.709061] r5:c0b42270 r4:00000007 > [ 673.712610] [<c010f074>] (handle_IPI) from [<c0101550>] (gic_handle_irq+0x9c/0xa0) > [ 673.720171] r10:c0c02524 r9:f0825000 r8:f0824000 r7:ee8bbf40 r6:f082400c r5:c0c26380 > [ 673.727983] r4:c0c02848 > [ 673.730489] [<c01014b4>] (gic_handle_irq) from [<c010d7b0>] (__irq_svc+0x70/0xb0) > [ 673.737964] Exception stack(0xee8bbf40 to 0xee8bbf88) > [ 673.742992] bf40: 00000001 00000001 00000000 c011b660 ee8ba000 c0c448cc c0c024d4 00000002 > [ 673.751160] bf60: 00000000 00000000 c0c02524 ee8bbf9c ee8bbf60 ee8bbf90 c01743d4 c01089d4 > [ 673.759319] bf80: 200b0053 ffffffff > [ 673.762780] r9:ee8ba000 r8:00000000 r7:ee8bbf74 r6:ffffffff r5:200b0053 r4:c01089d4 > [ 673.770515] [<c01089a8>] (arch_cpu_idle) from [<c016cdd8>] (default_idle_call+0x28/0x38) > [ 673.778588] [<c016cdb0>] (default_idle_call) from [<c016d190>] (cpu_startup_entry+0x3a8/0x484) > [ 673.787182] [<c016cde8>] (cpu_startup_entry) from [<c010ee88>] (secondary_start_kernel+0xf8/0x100) > [ 673.796123] r7:c0c49328 > [ 673.798627] [<c010ed90>] (secondary_start_kernel) from [<401015ec>] (0x401015ec) > [ 673.806016] r5:00000051 r4:6e89406a So this seems to be PM related, since it hangs in pm_runtime_barrier() in device_shutdown(). Anyway, I noticed something else on boot: > [ 7.567702] usb-storage 1-2.2:1.0: USB Mass Storage device detected > [ 7.569762] scsi host0: usb-storage 1-2.2:1.0 > [ 7.579054] scsi host0: runtime PM trying to activate child device host0 but parent (1-2.2:1.0) is not active Maybe some details about my storage setup. While boot and rootfs are on a SD card, /var and some other things are on a USB thumb drive (/dev/sda is that drive). My guess is that with the runpm changes the failure to sync the thumb drive now blocks the rest of the shutdown/reboot procedure. With best wishes, Tobias Marek Szyprowski wrote: > Hello, > > This patch series finally implements proper runtime PM support in Exynos > IOMMU driver. This has been achieved by using recently introduce device > links, which lets SYSMMU controller's runtime PM to follow master's device > runtime PM state (the device which actually performs DMA transaction). > The main idea behind this solution is an observation that any DMA activity > from master device can be done only when master device is active, thus when > master device is suspended SYSMMU controller device can also be suspended. > > This patchset solves the situation that power domains are always enabled, > because all SYSMMU controllers (which belongs to those domains) are > permanently active (because existing driver was simplified and kept > SYSMMU device active all the time after initialization). > > Patch requires second version of Rafeal's "Functional dependencies > between devices" patchset, which is available here: > https://lkml.org/lkml/2016/9/8/798 > > If one wants to test this patchset, I've provided a branch with all needed > patches (some fixes for Exynos4 FIMC-IS driver are needed): > https://git.linaro.org/people/marek.szyprowski/linux-srpol.git v4.8-iommu-pm-v3 > > Patches are based on vanilla v4.8-rc6 kernel with Rafael's patches applied. > > Best regards > Marek Szyprowski > Samsung R&D Institute Poland > > > Changelog: > v3: > - rebased on top of latest device dependencies/links patchset > - added proper locking between runtime pm, iommu_attach/detach and sysmmu > enable/disable(added per iommu owner device's rpm lock) > > v2: > - replaced PM notifiers with generic device dependencies/links developped > by Rafael J. Wysocki > > v1: http://www.spinics.net/lists/arm-kernel/msg509600.html > - initial version > > > Patch summary: > > Marek Szyprowski (2): > iommu/exynos: Remove excessive, useless debug > iommu/exynos: Add proper runtime pm support > > drivers/iommu/exynos-iommu.c | 228 ++++++++++++++++++------------------------- > 1 file changed, 94 insertions(+), 134 deletions(-) > -- To unsubscribe from this list: send the line "unsubscribe linux-samsung-soc" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
 |